My webcam has stopped working all together. I downloaded a new driver and it now says the cam is disabled and doesnt even seen to show up on my system profile. help?

Sir You Just Need To Install Google Youcam Or Any Cam Application In Order To Use Your Webcam !
Incase This Does Not Fit Your Solution Then Try Reinstalling The Drivers Of Webcam You Have But Before You Do That Go To System>Device Manager>And See That Drivers Under Imaging Device Shows Your Cam And No Exclamation OR Question Mark Is Seen....Coz If Drivers Disabled Then It Will Reflect "A RED CROSS" And If Drivers Corrupt Or Missing It Will Give Question Mark/Exclamation Mark...
Thanks

I had the same problem once. There could be two reasons.

1. your cam is not working ( may be your laptop is not detecting it ) it happens sometime just because of loose internal connection

2. you still using wrong drivers.

I would like to suggest you to identify hardware first. Go to desktop > right click on the my computer and choose property
> click hardware > device manager

Now try to find your cam driver if that has been successfully instaled. ( yellow icons shows problem with drivers )

If you think that the cam is not present there, in that case you have problem with your cam ( possibly corrupted cam )

Hope that helps

slow down,please,what cam?, the one in the top screen bezel or
any of 1000 usb webcams/??? (where is your cam, i cant see it)
the in bezel cam , can be more than one type, on even one HP PC, (series)
so in there correct page for 8440p
you then selected w7
the picked 32bit or 64bit , did you?
the you see camera drivers, and there may be
2 or more, web camera, sp12345.exe files
when you run one and it tells you wrong one, it is.
its that simple.
if you get the OS wrong, the camera wrong or the 32/64bit wrong
it will fail.
click control panel , then pick system
right on that page it says 32bit or 64bit.
i have a bunch of 8540w that all work with cam, even with w10-64
here ill click for you
https://support.hp.com/us-en/drivers/selfservice/hp-elitebook-8440p-notebook-pc/4095872

i pick w7 and guess its 32bit.
then I see what.
i Click software multimedia
and run this.
http://ftp.hp.com/pub/softpaq/sp52001-52500/sp52437.exe
shows as 32/64 bit both

the camera inside can be.
missing
wires fell off.
or dead.
seen that many a time. from other service one,
they sold it with no cam and with cam.
some PC like this , the other owner puts in a new screen lacking a camera cuz its cheaper or only one he can find.
see? so looking inside matters big time.

It may be in Disabled status. Follow the step by step directions in this webcam technical support article for help in getting it enabled again.

It is possible your webcam is either disabled or the driver is corrupted. Try reloading the webcam software driver, reboot, and then try the free webcam test tool to check if it is working properly.

Try downloading another driver. You can find the download here:

http://www.topshareware.com/web-cam-ezonic-ez-cam-usb-driver/downloads/1.htm

http://lsearch.logitech.com/search/query.jsp?qt=SUPPORT&cl=US%2CEN&country=us&language=en&accept-charset=iso-8859-1&rq=0&charset=utf-8&la=en&col=corpweb&style=usen&region=AMR...YOUCAN DOWNLOAD ALL YOU NEED DRIVERS AND MANUAL HERE.RICHARDM69
Was this solution helpful? Show your Appreciation by rating it:MAKE SURE YOU UNINSTALL OLD DRIVERS BEFORE INSTALLING NEW

I recently bought Acer Aspire 4530 but the camera is not working. the camera is black and it doesnt open even if i change setting regarding brightness and all. I even downloaded Bison 2.0.01.7 and Suyon 2.0.8.1 drivers but when i install those - even it didint work.

i have the cd and cant reinstall it!! whats up with that??

wil u pls send me a pc suit .......
model no:TM-CAM110