Question about Navman iCN 320 GPS Receiver

1 Answer

Navman tcn 320 gps

When i turn my navman on it just says waiting for gps

Posted by on

  • Anonymous Mar 28, 2014

    How to use Navman ezy 45

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

From the Main Menu press the button underneath the spanner>Demo and deselect the first square if it is ticked>Save.

With your device turned off, press and hold the "OK" button in between the arrows and press the "On" button.

On screen you should see the "Maintenance Menu". Scroll to "GPS menu" using the arrow keys and select it using the "OK" button. Select "Perform a GPS cold start". When this has finished, press the "Home" key twice (the one with the three lines on it). Turn the unit off, then go outside, raise the antenna, and turn it on again. Keep it still for 10-15 minutes and the unit will start to pick up GPS again.

Posted on Jul 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My navman icn 520 wont find a gps signal and just keeps waiting for gps


I found that if you open out the receiver at the back and make sure it is touching the windscreen it works for me. If not I don't get a signal. It is worse in one of our cars because it has a heat reflective windscreen.

Feb 05, 2013 | Navman iCN 520 GPS Receiver

1 Answer

How to set time on MIO Navman 470


Hi,
go outside and wait for a GPS fix, the date and time will be set up automatically.
If that doesn't work, from the main menu go to My Mio and scroll down to reset the GPS.

Oct 29, 2010 | Navman Mio M400 Car GPS Receiver

1 Answer

How can i update my navman icn320


u need to go to the NAVMAN web site, register your GPS and click support and see if any downloads are avil, there may not be any, if not u will have to wait until they are released.

Sep 06, 2009 | Navman iCN 320 GPS Receiver

1 Answer

Navman 1CN 330


i have just bought second hand navman icn310 need manual turns on and keeps saying waiting for gps ?

Mar 26, 2009 | Navman iCN 330 GPS Receiver

1 Answer

Continual "waiting for gps " message


the message should also read no mnsa data first... if these units are not in continual use,they get corrupt for some reason. all you can do is hope the gps fix will work itself out,otherwisw buy a new unit.

Dec 26, 2008 | Navman ICN510 GPS Receiver

1 Answer

Navman N40i compatability with Vista


Solution to get GPS Navman N40I working with Windows Vista.

I solver the problem (most of it) by uninstalling the old activsynk witch was delivered with the manufactory CD. Then I downloaded from “http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx” Windows Mobile Device Center. After installing this software I connected my Navman N40I to my PC and waited to for the Mobile Device Center application to load. When it tried to gain partnership with my GPS I removed it. Voila, and the SmartST Desktop 2006 SE application was able to communicate with my GPS.

Hope this will help you!

Kind regards
Mega A

Sep 24, 2008 | Navman NavPix N40i GPS Receiver

2 Answers

Naveman PIN 570 gps receiver problem


i get the "waiting for gps" message if the gps unit is sending data to the main unit, but no satellite signal is found.
does the unit have sky view?

Sep 16, 2008 | Navman PiN 570 GPS Receiver

1 Answer

Navman f20


my navman f20 has lost its sound

Mar 09, 2008 | Navman F20 GPS Receiver

2 Answers

Not working


From the Main Menu press the button underneath the spanner>Demo and deselect the first square if it is ticked>Save.

With your device turned off, press and hold the "OK" button in between the arrows and press the "On" button.

On screen you should see the "Maintenance Menu". Scroll to "GPS menu" using the arrow keys and select it using the "OK" button. Select "Perform a GPS cold start". When this has finished, press the "Home" key twice (the one with the three lines on it). Turn the unit off, then go outside, raise the antenna, and turn it on again. Keep it still for 10-15 minutes and the unit will start to pick up GPS again.

Oct 30, 2007 | Navman iCN 320 GPS Receiver

2 Answers

Navman icn510 gps reciever problem


How long are you waiting and are you moving while it is trying to acquire signal? These receivers are using older circuitry that may take up to 20 minutes to first acquire a signal from a cold start. If you are moving it may take longer!!! The good news is that after you have initially acquired a location, if you turn the unit off it will only take a minute or so to reacquire after it has "warmed" up.

Oct 22, 2007 | Navman ICN510 GPS Receiver

Not finding what you are looking for?
Navman iCN 320 GPS Receiver Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Navman GPS Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

The Knight
The Knight

Level 3 Expert

73118 Answers

Neil Gossage

Level 1 Expert

4 Answers

Are you a Navman GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...