Question about Motorola Mobility DRC800 Universal Remote Control
My tv is a digistar and there is no code can u help me.
Hi go here for the complete usermanual, and try thid following.
If none of the codes listed under
“Device Codes”on the back of this
guide match your device, you can
search for a set of commands that will
work. Your remote will sample all the
codes in its system for that device
mode to find one that will allow you to
control your device.
1. Press and hold a device mode
key (AUDIO, DVD/VCR, or TV) for
at least six seconds. The LED for
each device key lights up, then
the key for the device you
selected remains on.
2. Press a function key (such as
Power or Mute). The following
function keys are valid for
Searching (Power is
• CH +
The device key’s LED blinks
three times, then turns off.
3. Press !. The remote will send
the IR command for the function
you pressed in Step 2.
4. If the device performed the
function you pressed, press OK.
The remote will now control the
device you selected in Step 1.
If the device did not perform the
function you pressed, repeat step
3. Press " to retry the previous code
I hope this helps
Please rate accordingly
Posted on May 04, 2008
Tips for a great answer:
Jul 09, 2012 | Remote Controls
Oct 08, 2010 | Remote Controls
May 11, 2010 | Remote Controls
Oct 03, 2009 | Jensen JR400 Remote Control
Mar 28, 2008 | Motorola Mobility DRC800 Universal Remote...
Nov 17, 2007 | RCA RC-U703SP Remote Control
152 people viewed this question
Usually answered in minutes!