Question about Dacor ECS230 Epicure Electric Double Oven

Open Question

My dacor oven is flashing pbr - Dacor ECS230 Epicure Electric Double Oven

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
vitg55
  • 78 Answers

SOURCE: dacor single oven flashes an F2 error code and won't stop beeping!!!

This is from manufacture service manual:

-F2- Alarm Heating Mode High Temperature
Is activated when the ERC senses a runaway heat condition or when the temperature exceeds
“runaway limits”. The ERC will beep until the cancel or another function is selected. If the alarm
repeats the F2 alarm check the oven sensor and wiring after fi rst checking for a stuck relay. If alarm
goes away verify the oven will complete a clean cycle without any type of failure.
Another words the problem with oven sensor or relay board.

Posted on Dec 18, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dacor oven keeps beeping and flashing PRB. How do I stop the beeping?


Most unwanted beeping on Dacor products are due to a bad touchpad... Use your model # and start looking for a replacement , by touchpad I mean a part something like this one: Dacor Touchpad 62678B

Jul 12, 2016 | Dacor Epicure 30" Double Wall Oven,...

1 Answer

Dacor electric ovens top and bottom will not heat


Have you set timer?If it is flashing it will need to be set before ovens will work. You will need to refer to your handbook to do this.

Mar 07, 2015 | Dacor Ovens

1 Answer

My oven flashes and beeps F 4. What does it mean?


F4 on a Dacor oven is a bad temperature sensor.
The temperature sensor is inside the oven up high on the back wall

Mar 29, 2011 | Dacor PCS130 Preference Electric Single...

1 Answer

My oven display is beeping and blinking 'PBR' on the display. What does that mean?


I had this same problem last night.. I have been having problems with the oven shutting off on preheat.. That sort of stopped. Last night lost power to the house. When it returned the oven was beeping and flashing PBR. I turned off the breaker for a few mins. last night and it returned. It was bugging me so much that turned it off the whole night. Woke up this morning turned the breaker back on and it stopped. I don't think this is the total solution. I am thinking that eventually I am going to have to replace power board in this oven. Hope it works!

Sep 23, 2009 | Jenn-Air Ovens

1 Answer

I think my heating element for the Dacor 6 burner range went


Hi there.
You have faulty oven element. and nothing more serious than that.
Simply disconnect and remove the faulty element, and fit a new one.
Problem solved!!!.
Plz rate my solution.Thanks.

Dec 22, 2008 | Dacor ECS127 Epicure Stainless Steel...

1 Answer

Dacor single oven flashes an F2 error code and won't stop beeping!!!


This is from manufacture service manual:

-F2- Alarm Heating Mode High Temperature
Is activated when the ERC senses a runaway heat condition or when the temperature exceeds
“runaway limits”. The ERC will beep until the cancel or another function is selected. If the alarm
repeats the F2 alarm check the oven sensor and wiring after fi rst checking for a stuck relay. If alarm
goes away verify the oven will complete a clean cycle without any type of failure.
Another words the problem with oven sensor or relay board.

Oct 26, 2008 | Dacor MCS130 Millennia Electric Single...

2 Answers

F1 error Dacor Oven


I'm sorry but I am not familiar with Dacor ovens, the research I performed indicated that the ERC (clock module) has failed. You could try the oven sensor probe if it is a temperature related issue.
I truly wish I could help you further with your dilemma but am unable to provide any further information except search the web. Good luck....

Regards;
reg501

Jun 29, 2008 | Ovens

Not finding what you are looking for?
Dacor ECS230 Epicure Electric Double Oven Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Vitaliy Gins
Vitaliy Gins

Level 2 Expert

78 Answers

ashburton

Level 3 Expert

417 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...