Looking for reset code for whirlpool disher model #665.170.32401

It will be in the bottom of the dishwasher Usually unscrews.

Looks like a problem with oven temperature sensor. Some of these models have a thermal fuse which may need to be checked and reset if possible or replaced.

The sensor is not cheap. see site


WHIRLPOOL OVEN SENSOR TEMPER for AKZ223 IX 858522304000

test the heating elements and thermost, they are the key for water heating and clean the disher. +Timer : test for defective, clean contact, repair wires loose, burn or breake

First try resetting your error code if there is one from your manual, then try the below.Also check to make sure your thermal fuse is good as well then do below.
Try pressing normal wash -heat dry-normal wash-heatdry- normal wash-heat dry- norma wash - heat dry. all the lights should come on. then after a little bit. keep pressing start till disher washer gets back to normal shut down. Sometimes this uses other features and opens contacts that are rarely used and recycles the processor in control panel reactivating stuck contact solenoids.If none of this works your control panel needs replaced cost 100 up to 200 dollars. Remember to rate my solution and this is how i earn my achievements here on FixYa.

is this a new unit or old one? the high pitched sound is the pump some models make this sound every time they start up. it will make the sound when you start it up but then goes away. try this before you start it run the hot water in the sink let it get hot turn off the faucet then turn on the dishwasher.

Make sure your machine is not over loaded.
When you open up the door when machine has just finished do you get a cloud of steam ?
If not the drier element has blown and will need to be replaced.

You hook up to the hot water supply

Without the model number I have to guess.
Fault code 'f4' means "faulty temperature sensor or element".

Here is a link to User manuals:

http://fisherpaykelparts.net/index.php?blockitemid=29

If this information was useful, please select YES to the first two rating questions. Good Luck and thank you!

I have a brand new front loader that never fill with water but shows F20. How can I get this machine to wash clothes?