Question about Craftsman 10" Table Saw

1 Answer

Problem with 10" craftsman table saw

I have a 10" craftsman table saw. The whole motor and saw blade do not line up with the rip fence .When I try to line them up, I"m about an 1/8 of an inch off from the back of the blade to the front. I don't see any means for adjusting as the motor is fastened solid to the frame. Do you have any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 396 Answers

Your adjustment should be done on the rip fence which will align it to the blade for strait non binding cuts.

Posted on Aug 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i turn on saw it bogs down and dose not take off spining but is not froz


If you are trying to rip wood with the fence it will most likely be that your fence is not true to your blade check the blade to see if it is the same distance on both ends of the blade to the fence. If that is the case you will need to adjust your blade. Check your owners manuel to start that process.

Jan 27, 2014 | Craftsman 10" Table Saw

1 Answer

Table saw blade alignment


Are you referring to the table top or rip fence alignment? The blade itself is not aligned. We adjust the table to parallel with blade and the rip fence should toe away from blade 0.01mm over the length of the rip fence to prevent binding.

Jan 14, 2014 | Delta Saws

1 Answer

I have a crftsman table saw mdl # 137228210 I purchased the saw used. I need a rip fence . the guides are allready there. any help would be appreciated


There's an exploded parts drawing and parts list at the link below. This may be useful to see what the fence is supposed to look like. It's not listed as an assembly, just a surprisingly long list of parts that would cost a fortune - if they were all available. Maybe you can find one on ebay. Barring that, you can always just clamp a board to the table to rip with - the hard part is getting the makeshift fence to be parallel to the blade. To do that you can use an adjustable square and measure from a miter slot in the table to get a quick and straight setup. Good luck.
http://www.searspartsdirect.com/partsdirect/part-model/Craftsman-Parts/Saw-Parts/Model-137228210/0247/0744600/P0104056/00001?blt=06&prst=0&shdMod=137228210#Partslist

Feb 09, 2011 | Craftsman 10" Table Saw

1 Answer

Rip fence to saw blade alignment


I dont believe there are pictures, but what you need to do is move the fence to the blade, there are 2 10MM bolts on the backside that you need to loosen and then you can move the fence to square with the blade. Snug them down and move the fence and recheck let me know if you have anymore problems

Jul 18, 2010 | Dewalt DW744S 10" Portable Table Saw with...

2 Answers

New table saw, timber runninig off away from guide, saw blade running its own line,do i need to reset the guide.


The guide is called a fence. The fence should be positioned to the right of the blade. When using the fence, the largest part of the board goes between the blade and fence. Fences are typically have some relief toward the end, so you don't get the blade cutting on it's way down, and then cutting again on it's way up.

Apr 22, 2010 | Craftsman 10" Table Saw

1 Answer

After moving the table saw to a new residence i cant get the rip fence to line up with blade.i tried everything that was in the trouble shooting guide.


I am guessing it must be damaged beyond the adjustments. Are you sure the blade is aligned with the table? If not that could be the problem. I have most rip fences for craftsman belt drive saws available, Ebay 'Hokienpokie" or contact me via email, if you need another fence. Jim

Oct 05, 2009 | Craftsman Saws

1 Answer

Straight cutting with rip fence


when i use my table saw, i use clamps on the fence, i dont rely on the one built in.

Feb 26, 2009 | Craftsman 1/4 x 72-5/8" Band Saw Blade, 6...

Not finding what you are looking for?
Craftsman 10" Table Saw Logo

Related Topics:

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Saws Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Craftsman Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...