Question about Bose Acoustimass 10 II System

1 Answer

I have an Acoustimass 10 system with SL 2 Wireless Sound Link and Yamaha HTR-5860 receiver. The rear speakers hiss when I have the TV on but don't hiss when I play a DVD. I have checked all connections and they are fine. What's the problem?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 311 Answers

When you play real DVDs?
im assuming you do
DVD quality is higher than standard TV signals and also TV signals are subject to noise from the envionment
as for DVD there is every little chance for noise because its from DVD player to speakers.

what you could try is swapping the cables that carry sound from the DVD palyer to the system with the ones that carry sound from the TV to the system
if you can

and see if that helps but i doubt that it will help

all i can say is you have to live with the noise or get a HD reciver or something along those lines

also i just read that the back speakers are wireless temporarily move the wireless speakers towards the transmitter and see if the noise stops

or if you can hard wire them temporarily and see if it helps

Posted on May 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Connecting Digital Audio to yamaha receiver


You've cabled it correctly. But on the TV there are settings for the Digital output, Off, PCM, and Dolby. Make sure you've set this correctly on the TV, and the Receiver.

Jan 01, 2014 | Audio Players & Recorders

2 Answers

Balance is stronger on left than right side. I don't see a button to adjust the balance. i have it hooked up to my lcd as well but the sound is definitely louder on the left and leaving out some of...


You really need to look in the manual. The individual channel levels (and other parameters) are adjusted in the initial setup. This isn't your grandpa's stereo that you just turn on and listen.

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Yamaha-HTR-5860-Receivers-manual/id/394ci075/t/2/

Jul 07, 2011 | Yamaha HTR-5860 Receiver

2 Answers

Hi, I bought a Bose acoustimass 16 - 6.1 channel, iam curious to know which receiver is suitable for that.


I would get a receiver that puts out a little less power than the speakers can handle. This will prevent you from blowing them by sending too much power to them, but will still send enough power to make them sound good.
An example would be, if you're speakers have a combined power of 500 watts get a receiver around 495 watts or a little less.

May 03, 2011 | Bose Acoustimass 16 System

1 Answer

Hello i was wanting to know if i could hook up my AX-596 amplifier to my Yamaha HTR-5860 reciver


I assume you want to slave it to the receiver and drive some more speakers with it.

Connect some RCA cables from whichever channel pre-outs you want on the HTR-5860 to any input on the AX-596.

Set the AX volume to something sufficiently high, run through the HTR's speaker level setup and match the AX volume to match the channels on the receiver. Then leave the AX's volume alone.
---

If you just want the AX to have access to program sources of the HTR, run the RCA cables to it from one of the VCR1 or 2 Out (but DO NOT select whichever one you use via the front panel). These are not affected by the HTR's volume controls.

May 07, 2010 | Yamaha AX-596 Amplifier

1 Answer

Yamaha HTR-6130 sound only from centre, rear or front speakers


its not how there connected its in your settings. rehook up all your speaker connections properly,then make sure you proram the reciever to recieve fiber optic,hdmi,digital coax etc in the reciver.

May 18, 2009 | Yamaha HTR-6130 Receiver

1 Answer

RECEIVER WORKS FINE WITH THE RADIO NOT THE TV.


correctly connected to output on tv ? ie red and white left and white and not yellow (video)??

Dec 08, 2008 | Yamaha HTR-5860 Receiver

1 Answer

Hooking up an EQ on a Yamaha HTR 5860


Are you nuts? You dont need EQ to this system.This is such a nice syetem,inbuilt EQ gives very good output.Don't try to connect EQ if you are not an engineer.It can be connected with external source

Feb 10, 2007 | Yamaha HTR-5860 Receiver

Not finding what you are looking for?
Bose Acoustimass 10 II System Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bose Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Bose Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...