Question about Apple OneScanner 1200 Flatbed Scanner

1 Answer

SCSI to USB connection

What cable do I need to connect my Apple OneScanner to a USB port? Thank you for reply.

Paul Ilie

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

You would need a USB to SCSI (50 pin Centronics) adapter. That would get it connected, but i don't you are going to find any software or drivers that will then see the scanner so you could use it.

Posted on May 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I connect a UP-D50 printer with a Sony Vaio?


Use a usb cable or SCSI to usb cable from either a Sony Store or ebay.
Youy will need apropriate drivers for your OS.

Key Features
• Superb Print Quality
• High Speed Printing, A5 Size
• Approximately 300 dpi Resolution
• Standard SCSI Interface, Compatible with
Windows
®
95/98/2000, Windows NT
®
4.0 and
Macintosh
®
OS.
• USB Compatible
*
with Optional SCSI to USB
Converter Cable
• Compact Size

Nov 14, 2014 | Sony VAIO Computers & Internet

1 Answer

Can I use the scanner with Win 7?


You can only use usb to scsi adapter check this link for some models:
USB to SCSI

Dec 10, 2013 | Epson GT 12000 Flatbed Scanner

1 Answer

Hello Thank for your cooperation with us, but I have a problem after the definition of a canon scanner dr-3060 has not been identified and demonstrated a lack of scsi Did not find it from the CD and...


I am very well versed in Canon scanners with many years of experience on them so I hope my advice helps you out. With any canon scanner that uses SCSI only 3 things can go wrong with them. First I would check the SCSI cable so see if the the connecting heads have pulled away from the cable and the tiny wires are exposed. If so one of the wires may be broken. Or possibly a bent pin on the connector. A simple test would be to replace the cable with a good working one. Then try the scanner to see if it will scan.

Second, the SCSI card itself, on boot up while your still in the boot screen you should see something like ADAPTEC SCSI and then some numbers. Or something similar depending on the manufacturer of your SCSI card. That particular scanner uses SCSI II. If you dont see the prompt window on boot up then I would go to item 3 below.

The last thing to try is item 3 and you will need to go into control panel in windows to do that. In control panel I would look device manager and then imaging. Under imaging if you have a yellow question mark your system does not recognize the scanner as being connected to the computer. If you verified that items one and two above are good and functioning correctly then I would disconnect the scanner via the scsi cable from the computer and reload the drivers for the scanner and then rehook up the scsi cable and reboot the computer. Then I would go back to control panel/device manager/imaging to see if the computer now sees the scanner if it does then you are able to scan again. If it does not, and you have confirmed that the SCSI cable and card in the computer are good and working and the drivers are installed correctly. Then it would be safe to say the SCSI port on the scanner is faulty. The scanner will need to be repaired then by a Canon technican.

I hope this helps you out.

Mar 30, 2011 | Canon DR 3060 Path-Through Scanner

1 Answer

I want to retrieve data from an old 50-pin hd from my old mac. Anybody got a solution?


There are two ways of retrieving data from a SCSI hard drive.
1. Connect the SCSI hard drive to a different SCSI connector on the same data cable, make sure this hard drive has a different SCSI ID from the first hard drive or other SCSI devices in your system. When you boot up your MAC you should see the second SCSI hard drive, You can then copy off your data or remove the redundant files and keep the old hard drive in your system as a 2nd hard drive.
2. Connect the old SCSI hard drive to a SCSI USB hard drive adapter. Then connect it to the USB port on the MAC and you should see this as an external hard drive.

Jun 14, 2010 | Ricoh 2GB Printer Drive (SCSI-50PIN)...

1 Answer

I use a Mac G3 Wallstreet Powerbook with OSx. Does OSX talk SCSI?


It will only read devices connected unless there is a problem with the scsi port. Also be aware early scsi needed termination to be read.

Apr 08, 2010 | Apple Power Mac G3 Desktop

2 Answers

Can the P2055d be connected with a parallel lead?


Most HP's if they have a port for parallel, it is a special plug on the back that looks more like a SCSI plug. If your printer has this plug you need the special cable, otherwise you will need an adapter to convert USB to parallel.

Dec 28, 2009 | HP LaserJet P2055d Printer

1 Answer

SCSI Scanner connection to USB


There are USB to SCSI adaptors

http://www.usbgear.com/USB-TO-SCSI.html

But looking at the prices it may be worth bite the bullet and get somthing a little more up to date

Aug 07, 2009 | Apple 24" iMac Desktop

3 Answers

My exterior Apple CD 600e will not show on the desktop of my Maci


As I recall, this is a SCSI device. Like many electrical connectors, SCSI connectors can develop a light corrosion which can keep the signals from being transmitted. The easiest way to clean such light corrosion is to shut down the Mac & power down *all* SCSI devices in the chain. Then gently unplug & replug all SCSI connectors. This will scrape off much of the corrosion & usually results in connectivity being restored. Be sure to unplug and replug the SCSI terminator attached to the last device in the SCSI chain. Restart by powering up the SCSI devices and finally restarting the Mac. Good luck!

Apr 02, 2009 | AppleCD 600e (M3958LL/A) CD-ROM Drive

1 Answer

I cannot install music from my computor to my Ipod 4 nano


If you can't connect iPod nano to your computer , make sure;
  • you have installed the latest iTunes software from www.apple.com/ipod/start.
  • Try connecting to a different USB port on your computer. Note: A USB 2.0 port is recommended to connect iPod nano. USB 1.1 is significantly slower than USB 2.0. If you have a Windows PC that doesn’t have a USB 2.0 port, in some cases you can purchase and install a USB 2.0 card. For more information, go to www.apple.com/ipod.
  • iPod nano might need to be reset (see page 64).
  • If you’re connecting iPod nano to a portable or laptop computer using the iPod Dock Connector to USB 2.0 Cable, connect the computer to a power outlet before connecting iPod nano.
  • Make sure you have the required computer and software. See “If you want to double check the system requirements” on page 68.
  • Check the cable connections. Unplug the cable at both ends and make sure no foreign objects are in the USB ports. Then plug the cable back in securely. Make sure the connectors on the cables are oriented correctly. They can be inserted only one way.
  • Try restarting your computer.

Mar 11, 2009 | Apple iPod nano

1 Answer

How to attach outdated hardware cable to computer w/usb ports?


Hi!

I'm not really sure what you're asking. If your problem is that your scanner has an "outdated" connector and you want to try to connect it to your PC via USB ports, the only sensible answer, given the prices of scanners, is to buy a new scanner. Your old scanner, if it is not USB, is probably a SCSI connector device. Do a Google search exactly like this "USB to SCSI adapter cable" and you'll see a lot of results. Cables generally seem to range from $20 to $100. Even if you get the scanner connected, there is a very high probability that there will not be any drivers available that will work with the new computer and cable. All-in-all, a new scanner, even a cheap one, is the way to go IMO, and will give you better scans to boot.

Good luck and please let me know if this helps!

Bob

Oct 09, 2008 | HP ScanJet 3200C Flatbed Scanner

Not finding what you are looking for?
Apple OneScanner 1200 Flatbed Scanner Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Office Equipment & Supplies Experts

Tony

Level 3 Expert

2600 Answers

Jim Keysor

Level 2 Expert

329 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you an Apple Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...