Question about Televison & Video

1 Answer

I have a 42" Maxent that uses an RC-278 remote control. I need the code so that I can use my AT&T U-Verse remote control. Please help. AT&T was no help

Posted by on

  • sdroker May 11, 2010

    It's not perfect, but it works OK Thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,993 Answers

Hello,

carefully follow the steps below:

  1. For this example I will assume you are trying to program your TV but you can follow these instructions to program any device on your Uverse remote. Make sure that you have turned on the tv before you begin programing your Uverse remote control
  2. Hold down the TV button on the Uverse remote. (If you are trying to program a different device, hold down the button that names that device). As you are holding the TV button, press and release the OK button. You know you have done this right when all the mode keys flash twice.
  3. Find the 4 digit code for your device in the User guide that was given you when the Uverse was set up, or online at https://www.att.com/support_media/images/pdf/uverse/set-up-code-list.pdf
  4. At this point, the TV mode button should flash three times. Try to turn the TV off by pushing the power button. If it does not turn off, try a different code. The manufacturer of your TV may have many codes.
  5. If none of the codes for your device work, try manually searching for a code. Go back and repeat steps 1 and 2. Then enter 922. Hold play as the remote cycles through various codes. When your TV turns off, push enter.
Good luck.

Posted on May 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

U-verse


0281,0288.
Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Aug 11, 2014 | Vizio VP422 42 in. Plasma TV

1 Answer

I WOULD LIKE TO KNOW IF THERE IS AN UNIVERSAL REMOTE THAT WORKS WITH MAXENT ML3251 HLT LCD TV


i have a 42" MAXENT PLASMA TV & I LOST THE REMOTE CONTROL. MY BROTHER BOUGHT AN ALL IN ONE UNIVERSAL REMOTE CONTROL & SENT IT OUT TO GET PROGRAM. THE CODE IS 1755, & I HAVE ACCESS TO PRETTY MUCH EVERYTHING BUT CHANGING THE INPUT WHILE IN PICTURE & PICTURE MODE

May 30, 2010 | Televison & Video

1 Answer

Need universal remote control code for maxent 42" plasma tv?


I hope that you have gotten this resolved, but if not, or if you have any other questions, here are the codes and some simple steps to run through.


1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

246
730
746


Becki Barned
DISH Network Customer Service

May 17, 2010 | Sampo PME-42V3 42 in. Plasma Television

2 Answers

The at&t remote will not control the on and


check the remote control.

Take the remote control nearer to your portable radio. Tune to the MW range 550 kHz to 1600kHz. Lower end prefered.

Press the keys you will hear a sound. Press on/off and see whether you get this sound. If no sound you have check the remote pcb or the key board mat.

Mar 29, 2010 | Maxent MX-42XM11 Television

1 Answer

The RC-282 remote control for my Maxent MX-5020HPM 50" flat screen died. I need remote code so that I can program a universal remote to run this Maxent TV.


It in ur instructions manual follow it.
The best way to buy the same remote.
At 1-800-rmotes Factory original website.

Aug 18, 2009 | Televison & Video

2 Answers

Need code for my maxent tv


Maxent is sometimes the same as SAMPO. Try 746...

Mar 30, 2009 | Maxent MX-42V1 42 in. Plasma Television

1 Answer

I got a Maxent 42" Plazma Tv MX-42HPM20 with out the remote


Hey Z,

I believe the model # is RC-278 and is supposed to be the remote that comes with the TV. FYI - This TV operates best as a "Stand-alone" TV. As in the remote itself is not designed to work like a "Universal" remote and you may have issues in the future trying to hook up various other types of equipment (ie. DVD, Tuner, etc..)

Hope this helps!! Happy Holidays..

Rob

Dec 22, 2008 | Maxent MX-42HPM20 42 in. Plasma HDTV

1 Answer

Tv remote code


Trying to program a universal remote can sometimes be a frustrating process. Successful programming of a universal remote depends on whether the universal remote manufacturer included our company’s information in the remote when it was assembled.

Then a cable company (ie., Comcast) or satellite provider (ie., Dish Network) orders their decoder box and universal remote control from a manufacturer (ie., Scientific Atlanta, Motorola, etc.), the decoder box manufacturer provides a list of all the possible remote controls this universal can duplicate. From that list the cable company or satellite selects which manufacture’s products to include on their new universal remote. Once those manufacturers names have been decided, they are placed on the universal remote and a numeric code is assigned. If they choose not to include our company on the universal remote, the universal remote may not access the Maxent screen.

If you cannot locate Maxent on the list provided to you by the universal remote provider, please try the following:

Through contact with various cable and satellite content providers we have developed a list of the most common numeric codes that are used with universal remotes.

Content Provider/Most commonly used code

Comcast: 1755
Comcast (ML-3251HLT Model): 0054
Insight: 1755

Direct TV: 11755
Dish Network: 742
Cable Vision: 165
Adelphia: 0156, 1755
Universal: 0762
One4All: 0036
Time Warner: 0230


We have identified other manufacturers of display products that have similar remote control information to ours. Depending on the universal remote you are using these manufacturers may work. Please use the documentation that accompanied your universal remote, and look up the following companies. Input the numeric code associate with that company.

Gateway
Sampo
Viewsonic
Magnavox
Phillips
Marantz
Pilot

If the universal remote you are trying to program contains a Code Search (the remote will scan through all the codes contained within the universal remote) function, we recommend that you try that procedure. It is possible that there may be another manufacturer code that may work with our monitor.

You may also want to try a Learning Remote from another manufacturer. This type of remote control can absorb or record the information coming directly out of the Maxent remote control. The learning remote then duplicates that information and acts like the Maxent Remote control. This type of remote can also record the signal coming from your other universal remotes in the same manner. In which case you can use this learning remote for your entire audio video system

please rate the chat session that got disconnected due to slow server if this helps.and if does not helps please reply for further help.


Oct 09, 2008 | Maxent MX-42HPM20 42 in. Plasma HDTV

2 Answers

Maxent MX-42VM10 42 Remote


Trying to program a universal remote can sometimes be a frustrating process. Successful programming of a universal remote depends on whether the universal remote manufacturer included our company’s information in the remote when it was assembled.

Then a cable company (ie., Comcast) or satellite provider (ie., Dish Network) orders their decoder box and universal remote control from a manufacturer (ie., Scientific Atlanta, Motorola, etc.), the decoder box manufacturer provides a list of all the possible remote controls this universal can duplicate. From that list the cable company or satellite selects which manufacture’s products to include on their new universal remote. Once those manufacturers names have been decided, they are placed on the universal remote and a numeric code is assigned. If they choose not to include our company on the universal remote, the universal remote may not access the Maxent screen.

If you cannot locate Maxent on the list provided to you by the universal remote provider, please try the following:

Through contact with various cable and satellite content providers we have developed a list of the most common numeric codes that are used with universal remotes.

Content Provider/Most commonly used code

Comcast: 1755
Comcast (ML-3251HLT Model): 0054
Insight: 1755

Direct TV: 11755
Dish Network: 742
Cable Vision: 165
Adelphia: 0156, 1755
Universal: 0762
One4All: 0036
Time Warner: 0230


We have identified other manufacturers of display products that have similar remote control information to ours. Depending on the universal remote you are using these manufacturers may work. Please use the documentation that accompanied your universal remote, and look up the following companies. Input the numeric code associate with that company.

Gateway
Sampo
Viewsonic
Magnavox
Phillips
Marantz
Pilot

If the universal remote you are trying to program contains a Code Search (the remote will scan through all the codes contained within the universal remote) function, we recommend that you try that procedure. It is possible that there may be another manufacturer code that may work with our monitor.

You may also want to try a Learning Remote from another manufacturer. This type of remote control can absorb or record the information coming directly out of the Maxent remote control. The learning remote then duplicates that information and acts like the Maxent Remote control. This type of remote can also record the signal coming from your other universal remotes in the same manner. In which case you can use this learning remote for your entire audio video system

May 15, 2008 | Maxent MX-42VM 42 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Cindy Wells

Level 3 Expert

5054 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...