Question about Sanyo PLC XP45L Multimedia Projector

2 Answers

Color Bleeding I have a Sanyo PLC-XP45 which has a problem with color bleeding. When the monitor displays darker colors, there blue appears around the bottom border, and even extends into the display in the lower left corner. There is also a mildly faint green patch covering part of the upper right hand corner of the screen. I've tried switching out the lens, so I know it's not that. Could this be the LCDs gone bad, or maybe something with the prism?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The problem is most likely caused by a defective LCD panel. I am fixing this exact unit for a customer, tried cleaning the optics / LCD panels, made no difference. Panels aren't available individually, only as an assembly w/ the prism block. Sit down for this; DEALER COST $3148.59 !!!!!!!!!!!!!!

Posted on Dec 03, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

Hi,

Service the LCD Panels and then try.

Viren

Posted on Mar 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I have a Sony projector at my office PLC XU35 Multimedia projector, from today color show yellow and not clear. what is the problem? please explain


It is a Sanyo model.
See page 33 of the
http://cncms.com.au/SANYO-IMs/Commercial-Industrial/plcxu30_im.pdf
you can adjust several things like Color, Tint, White balance, Sharpness, Gamma etc.

Also make sure to perform regular maintenance listed on pages 38 and 39

Sep 06, 2016 | Sanyo PLC XU35 Multimedia Projector

1 Answer

Sanyo troubleshooting


The color wheel is the problem

Jul 16, 2014 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

Sanyo plc-xp30. Lamp turns on but has a yellow tint , in a circle that does not quite take up th ewhole screen. the color looks normal around the edges.


U need to unplug unit and turn on its back replace filter . blow out. sounds like its getting hot and dusty. u need to clean before u burn out your optical engine like i did.

May 25, 2011 | Sanyo PLC XP30 Multimedia Projector

1 Answer

No way to get simultaneoulsy my videos on the laptop monitor and on tne projector PLC XU 73 card : ATI Radeon X700


Most laptops have a Function (Fn) key in an alternate color (blue maybe) from the usual key text color (white usually).

By pressing this key, along with another key that has text of the same (blue) color, perhaps labelled with "LCD/CRT" or a pic of a monitor, or of 2 squares - one single square and one double "square in square", you can toggle between the modes of:
1. Laptop display only,
2. external display only, or
3. Both displays.

Be sure to check your laptop model manual for specific details to make sure this is possible.

Jun 09, 2009 | Sanyo PLC-XU73 Multimedia Projector

1 Answer

Bleeding blue color upon projection


Yes you can replace the lamp, but service in must including the RGB Panels for the same. that will solve ur problem.

Viren

Nov 24, 2007 | Sony VPL CS1 Multimedia Projector

Not finding what you are looking for?
Sanyo PLC XP45L Multimedia Projector Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5605 Answers

Are you a Sanyo Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...