Question about Hitachi 53UDX10B 53" Rear Projection Television

1 Answer

My hitachi keeps showing red and blue bands. when

My hitachi keeps showing red and blue bands. When I use the magic focus I get a #5 in the bottom right hand corner and nothing changes ..any ideas what to try?

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 5,138 Answers

Replace your convergence ICs they are big black ICs will have part number on them STK392-110s use 150s better ICs Mats has them 1-800-628-1118 also CK Low ohm reisitors 1.5ohms and up 3.9 ohms

Posted on May 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The blue light comes on for a while the cycles thru the blue, red, red, and so on..


Look for a recessed button on the front of the set "magic focus" which can cause the set to keep trying to do that function.

Jun 11, 2012 | Hitachi 55VS69 55" Projection HDTV

1 Answer

Goes through magic focus than in the middle stops and displays #5


This is a common problem. Its called a convergence failure.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Feb 19, 2010 | Hitachi 46F500 46" Rear Projection...

1 Answer

Picture is not focused, color is off. When we


this sounds like the convergence ic's need to be replaced that should fix the problem

Jan 25, 2010 | Hitachi 57F500 57" Rear Projection...

2 Answers

Hitachi 61UWX10BA Convergence Still Off After Chip Replacement


Remove Front bottom Panel thier you will see front of convergence board there is a small blue contact switich with TV on press and hold it for 5 sec then you should see convergence Pattern so you can aline convergence correctly I have the whole Manual to tv just have to find it. anyway for now try this.

Dec 01, 2009 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Will not show red color in picture, magic focus shows red though


You have a projection light element out. I had the green element go on mine. I had a service agreement so a repair tech changed it.

Feb 07, 2009 | Hitachi 43UWX10B 43" Rear Projection...

1 Answer

Hitachi 46F500


Having yellow and blue shadows outlines show up on picture.

Oct 03, 2008 | Hitachi 46F500 46" Rear Projection...

2 Answers

Hitachi 51G500 big screen rear projection tv


Is this a new television? Under warranty? You need a service call.

Aug 07, 2008 | Hitachi 51G500 51" Rear Projection...

1 Answer

Out of focus


Rach, if it doesn`t move from green to red to blue in Magic Focus then there is a problem with the convergence IC`s and probably one or more support resisters. These components will have to be replaced, questions? ask away, BMW Rider

Dec 14, 2007 | Hitachi 57F500 57" Rear Projection...

1 Answer

Hitachi 61SDX picture got dim shows Code 3


use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Nov 17, 2007 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

Hitachi help


you require an alignment,you must enter the service mode to adjust and save the settings.

Jan 09, 2007 | Hitachi 43F300 43" Rear Projection...

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2315 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...