Question about Nintendo Wii Console

2 Answers

Wii smash bros

I cant figure out how to play two player, i tried pressing buttons on the second player remote but I cant get it to come up.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

You have to scroll aroud on the home page of the wii controler to find reset option it will reset controlers........... gl

Posted on Mar 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

You have to press the home button and put recconect once you do that all the conntrolls will turn off and then press the 1 and 2 buttons at the same time to witch ever controll wants to be first it may take around twenty sec. to connect each then you do the same thing with the other one if your trying to put more do same thing once its connected just press b and go back and just go to two players and it should work... (DGKME@yahoo.com also myspace)

Posted on Mar 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wii Freeze Up


Hi,
Sounds like you need a soft or hard reset.
try unplugging the console from the mains for 5-10 minutes, then try turning on re-booting. remove any memory cards et,c. when you startup.

Mike @ Compurepair.

May 30, 2009 | Nintendo Wii Console

1 Answer

I'm trying to play multiplayer on quatom of solace for the wii and we cant figure out how to get the second remote on.


All you should need to do is have good batteries in the controller, then press any button to turn it on. If it is a new controller, it needs to be connected to the console. To connect, press the red button under the battery cover.

Dec 29, 2008 | Nintendo Wii Console

1 Answer

Can't get 2nd remote to work


We had this same problem so I did a google search for 2nd wii remote not connecting or staying connected and this is what we came up with and did this and it really works! So hopefully this will help all of you to. Good luck! K and M

This is from www.nintendo.com/wii :

Wii Remote not being recognized by the Wii Console (lights on the Wii Remote flash when you press a button, but then go out) - Most Common:
Getting the Wii console to recognize (or "sync" with) a Wii Remote, especially one that did not come in the box with your Wii console, may require doing a few additional steps before it can be synced. Additionally, a Wii Remote that was working, but is no longer being recognized (or has "lost its sync") may need to be re-synced. Please use the troubleshooting steps listed below, which our experience has shown can solve many Wii Remote issues.
http://www.nintendo.com/consumer/systems/wii/en_na/ts/wiiremote.jsp
    Try these steps!
  1. Turn the Wii console power OFF by pressing the POWER Button on the front of the console.Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.

  2. Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

  3. After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:
    1. With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

    2. Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

    3. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture below).

    4. When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

    5. This sync procedure (steps "a" through "d" above) must be followed for each additional Wii Remote added to the system.

Jun 19, 2008 | Nintendo Wii Console

1 Answer

Connecting 2nd remote


There are 2 ways to connect remotes on Wii. The way that the remotes sync permanently to a Wii system and the second one that connects the remote temporarily.
To connect the remotes pernanently, open the flap on the front of the Wii and press the red sync button. Then take the remotes and press the buttons 1 and 2 at the same time.
Do the same with the other controllers

The second way can be done via the Home menu. Go to home menu pressing the home button and then point the remote to the bottom of the screen (where a wii remote is iconized) Then go to the synchronization menu to synchronize the remotes. Press 1 and 2 of the remotes to get synchronized.

The time you press the buttons on the remotes determines the player assigned to it. For example, the first remote you synchronize is the first player, the second is the second player etc.

Also, I strongly advice you to READ THE MANUAL
seriously... do it.

May 24, 2008 | Nintendo Wii Console

2 Answers

Can't play with 2 players


Make sure you have paired both remotes to your Wii console.
Open the little door on the front of the Wii (under the disc slot), and open the battery cover of the Wii remote (but leave the batteries in).

Push the red button on the Wii (next to the SD card slot), then push the red button on the Wii remote (next to the batteries). You should see the Wii remote's lights blink.

Do the same for your other Wii remote.

Now on the bottom row of 4 lights on the Wii remote, one should have the first light lit, and the other should have the second light lit. You should also be able to see a cursor for each remote on the Wii Menu.

Apr 03, 2008 | Nintendo Wii Console

1 Answer

Wii conflicts - PLEASE HELP!!!


my game "mario galaxy" is stuck in my wii and i cant play super smash bros brawl.

Mar 12, 2008 | Nintendo Wii Console

1 Answer

Controller


I do not know about the controller turning off but the walking may be caused from holding over on the nunchuck while you plug it in, it happens with game cube controllers if you hold a button when plugging them in and for the game cube controller you can hold start, X, and Y for about 3 seconds to reset the controller and thatt fixes it, but I am not sure for the Wii remote. I suggest playing brawl with a gamecube controller

Mar 12, 2008 | Nintendo Wii Console

Not finding what you are looking for?
Nintendo Wii Console Logo

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Raj Patel

Level 3 Expert

847 Answers

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

phil

Level 2 Expert

567 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...