Question about Electrolux Dishwashers

1 Answer

Do you have any information regarding a Electrolux VISI model ESF6146S Regarding the door seal problems.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 269 Answers


The VISI was not a very successful design. the dishwasher ok.They in their ifinite wisdom decided to put a plastic panel inside the door held in with plastic push in rivets like on car door panels.This inner panel distorts due to the temperature and has to be replaced.This is an expensive part. Pt.No. 1170181018. costing € 218.63.( $ 283.54 ) If unit is still in the first year of warranty get in touch with Electrolux.

Hope this helped

Posted on May 11, 2010

Testimonial: "Thanks, great info. I presume there was no recall on these units"

  • Christopher Dowling May 11, 2010


    As far as I know there was no recall I replaced one recently but it was just inside the full warranty,still it might be worth contacting them and see if they will help you.

    Good Luck.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why is water not heating in cycle?

Hello Kevin, thank you for your post!
From my understanding your Electrolux dishwasher is not fully dissolving the detergent tablet. It may not be an issue with the water heating up it could be a possible problem with the water not receiving adequate pressure or not enough water. Does your dispenser have any build up inside of it? Have your spray arms been recently cleaned? I would recommend cleaning the dispenser and spray arms out. I can also provide you with information regarding any heater inside of your dishwasher. In order to do so I need your model number. You can locate your model number on the inside wall of your dishwasher. With this information I would be happy to assist you further. -Matt

Feb 02, 2016 | Electrolux Dishwashers

1 Answer

My Electrolux above oven convection microwave chimes are not working. Solution?

Hello friend, thank you for your post!

I understand that the chimes on your oven and microwave are not working. I would be happy to help you locate any additional information regarding the chimes. In order to assist you further I would need to have your model number. You can locate the serial tag (which lists your model number) on the inside wall of your microwave or on the door frame. Once I have that information I would be happy to assist you. -Matt

Dec 19, 2015 | Electrolux Microwave Ovens

1 Answer

Seal on Tappan wall oven came off, what to do?

Hey friend, I appreciate your post!
I understand that seal on your Tappan wall oven has come off. In order to provide you additional information regarding the seal I would need your model number and serial number. You can locate the serial tag (which has your model number listed) on the front of the oven on the left side. With that information I could provide you additional assistance. I look forward to your response. -Matt

Aug 03, 2014 | Tappan Ovens

1 Answer

Where can I see a vidio on using my oven

Hey Margaret, thank you for your post!

I see you are looking for video regarding your Electrolux oven. I would like to ask for some additional questions to better assist you. Is there a certain feature or option you are looking for assistance with? Also are you able to provide model number, with that information I can research any further questions you may have. You can locate the serial tag (which lists your model number) behind the bottom drawer of your range. Thank you for the post and I look forward to assisting you. -Matt

Jul 22, 2014 | Electrolux Ovens

1 Answer

I have ane electrolux dryer with reversible doors. I would like to keep the door opening to the left, but it hits the wall. Is it possible to adjust the door to make it stop before hitting the wall?

Hi Wendy, this is AP
I understand you want to reverse the door opening on your Electrolux dryer. I would be happy to assist you with those instructions. Are you able to provide the model number for your dryer? If this is a new dryer you may visit the manufacture website, locate your appliance, scroll down to bottom and you will see a listing of documents available, the installation instruction manual will have the reversal instructions listed. . I hope this information helps to some degree - thanks for your question, and please do not hesitate to reconnect if you have additional information regarding your question.

Thank you,

Mar 21, 2014 | Electrolux Dryers

1 Answer

Start dishwasher on quick wash starts at 50 min after 4 min jumps to 99 min is dish working properly

I understand you have concerns regarding your Electrolux dishwasher working properly or not. Would you be able to provide the model number for your dishwasher? I do believe I would be able to assist you further if you could provide the additional information.

Thanks, AP

Mar 14, 2014 | Electrolux Dishwashers

3 Answers

I own a 1Q-Touch Front-Load Electrolux washing machine. The door won't open. What can I do?

Hello Elizabeth P Cochran - Try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and restart unit. If the door does not open, then it sounds like the washer is possibly experiencing a communication problem with the control board, wiring failure or faulty door lock. Contact a professional to move forward accurately to properly diagnose/repair unit.

Jan 15, 2013 | Electrolux EIED55HIW Electric Front Load...

1 Answer

I have a Frigidaire front loaded dryer that is just a few years old. It continually beeps and the lights on the front panel flash and after few minutes it shuts off. How do I fix this problem?

I had encountered issues like your concern regarding the problem Frigidaire dryer. Most of them had contacted the Frigidaire repairman to check and put in a new control board and it works like brand new. Though it costs $100 for the service but this amount will be refunded if you contact the Electrolux and ask for a code to give unto the repairman to cover the cost of the board.

You may contact also:

Chris Polk
Escalation Specialist
Electrolux Major Appliances

So you may be guided, just send your contact information, and the best time to contact you. He would also need your model and serial number and a file number if available.

I hope it helps ^_^

Aug 26, 2012 | Frigidaire Electric Dryer

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

4350 Answers

Starnley Johnwells
Starnley Johnwells

Level 3 Expert

1031 Answers

Are you an Electrolux Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides