Question about Dishwashers

2 Answers

Diplomat Dishwasher Model ADP 8132

Hi,
Just been told that the motor is not working, its fills and empties but wont do the main wash cycle, does this sound like the mortor or could it be something else, just not confident that I am not being ripped off, any help please

Posted by on

  • Stevo43 Apr 01, 2008

    Thanks for assistance,now been advised the motor is sticking,is it worth repairing??

  • damian
    damian Jul 12, 2015

    sounds like your circulation pump needs replacing will cost about 60 quid to buy

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Please can you give me the dimentions of this Dishwasher Diplomat Model ADP 8132, as I have got to get a replacement and have been told that the Hotpoint FDL570X is the replacement offered,Many Thanks,

Posted on May 27, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 185 Answers

Sounds like a timer problem

Posted on Mar 28, 2008

  • william ludolph Apr 01, 2008

    thats up to you there about 150.00 or so is the overload bad on it it has two wires goung to it like on a angle towards the motor housing im curious now...............thank-you

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a beko 4311w dish washer that wont empty. i emptyed the water manually and have checked all filters and hoses and all seemed to be clean.then switched back on and machine completed one complete...


The motor runs in one direction to wash and the opposite direction to pump out the water. Look at the motor direction controls to see what is starting to fail.

Jan 03, 2015 | Beko Dishwashers

1 Answer

The dishwasher fills with water then just empties without washing


without any input from you to explain,
sounds like your drive motor (pump) is malfunctioning.
does it sit there for the length of cycle, then drain?
you say the motor doesn't work. replace it if it is deffective

Jan 01, 2013 | Dishwashers

1 Answer

The washing cycles both (pre-wash and main wash) can't work through to the end. when the water has been filled, the four indicating lights flash together and sounding like tide with rhythm. when...


It is possible that the machine does not start off the cycle because there are errors due to feedback from the inputs. For the program to start up the main program controller must initiate the INLET/MOTOR/DRAIN pump/ valve to open up and allow each function to be driven starting from the flow of water into the drum as also the drain valve to open to exit the water at the point of the program cycle. If this does not happen then the voltage at the valve/motor/pump must be checked or the fault relates to no voltage from the controller. This means the controller is a suspect since the cycle when advanced seems to go through well.

Make sure that a fault in any of the cycle will relate to the specified action, so check the command from the program module and then the executing device be it the valve or motor or pump.

Please check the link below:

http://www.repairclinic.com/Washing-Machine-Troubleshooting?red=Washing-Machine-Repair-Help

Thank you for using fixya.

Aug 27, 2011 | Dishwashers

2 Answers

Bosch SHE44C07UC/22 - FD8606 : pump does not run during wash cycle, but does run during empty cycle. timer works. fill works. empty works. relays are heard about 2 minutes into fill cycle. may be...


Hi 2ipnelson,

Very difficult to know for sure which part is not working.

It is best to run the dishwasher in testing / service mode to ascertain which component is not working.

I found a .pdf document that explains the whole process, it should also work for your SHE model.
The link: LINK - CLICK HERE

Follow the steps, and the culprit part should be diagnosed.

Hope this helps :-)

* If this solution helped you, please accept it

Jul 26, 2011 | Bosch 24 in. SHE44C05UC Stainless Steel...

1 Answer

MY DISHWASHER WONT KICK INTO WASH CYCLE CAN HEAR THAT IT WANTS TO BUT DOESN'T ..IT WILL FILL AND DRAIN AND DRY...CHECKED DRAIN AND FILTER CLEAR


Hi,
Welcome to FixYa.

Based on your description and provided the dishwasher is indeed filling with water, draining, heating, but not circulating, It sounds like a busted wash impeller within the main motor/circulation pump.

First though, do you hear a quiet sound of a motor starting once the unit has completed filling with water ?

( it will be super quiet if the wash impeller is broke as I suspect it may be...almost like a fountain, since the Viking...built by "Asko"...are very quiet under normal conditions. You will have to either get right down with your ear to the bottom or run it with the door open by activating the door switch with a screw-driver )


If so that is a tell tale of no wash action yet the motor runs, hence broken impeller. If you don't hear anything it may be a wire come off the main motor/circulation pump...but not likely.

This unfortunately is common with Asko built dishwasher`s and it is a case of being a victim of their own design.

What happens typically is the ball-bearings from the upper rack holders ( which are plastic which fatigues due to heat and fall apart ) fall out making their way into the sump, hence breaking the wash impeller from the motor.

Let me know what you find and I'll try and help you move forward from there.

Good luck,

Macmarkus :)

Aug 26, 2010 | Viking 24 in. Professional Series VUD141...

1 Answer

Dish washer fills and then drians without washing


If you're sure it is heating the water, then it sounds like the wash motor/pump has failed. If you've worked on washing machines and/or dish washers before, this is potentialy a DIY job - the Haynes Dishwasher manual is very good, and parts can be found on the internet.

The reason for cheking it is actually heating the water is that the symptoms sound very similar to those of a failed heater = fill, pause, empty, stop usually accompanied wth an error code. Error code will be presented by a number of flashes of a lamp, or a number on a display panle depending whch machine you've got.

Sep 12, 2009 | Whirlpool Gold 24 in. Built-In Dishwasher...

1 Answer

Won't run......


Hi,
It sounds like the main pump isn't running - either it is jammed with something, burned out or has a power supply problem. If you can disconnect the machine from everything and turn it onto its side and look at the base you may be able to see the main pump and check if it is free to turn, and also look for corroded contacts / broken wires.

If you are not up to doing that yourself then I guess you'll need an engineer.

Hope this helps you a bit.D

Jun 17, 2008 | Kenmore 24 in. 17482 / 17484 / 17489...

3 Answers

Empties and fills but boils the water


Can you hear/see any washing sound/spray, it sounds to me like the wash pump could be faulty.

Nov 20, 2007 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Dishwasher seems to be doing everything except washing


what your friend did would not affect the appliance. by the sound of it the main circulating pump or pump capacitor is faulty. capacitor is a cheap part but the pump will be expensive. only way to find out is to dive in and look. is pump motor is faulty then this will be faily obvious - burnt winding. if no apparant motor damage try substituting the motor capacitor - this is a cheap part

May 21, 2007 | Kenmore 24 in. 15079 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

1,455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...