Question about Aastra Telecom 8004 Corded Phone

Open Question

8004 aastra phone

When caller dials long distance with calling card, gets error saying that numbers dialed are not valid- three out of four attempts. phone is going through Cisco switch via analog gateway. When caller goes to VOIP phone, call goes rigth through. Any ideas?? Is 8004 pulse or tone?

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Ad
  • 1 Answer

SOURCE: How do I call forward this phone to my cell?

Forwarding is through the plan provider and part of the voice mail system.

Posted on Feb 09, 2010

  • 1 Answer

SOURCE: Cal do you use the

In order to set call forwarding on this telephone, must first have the feature CFV (Call Forward Variable) on in the line. This feature can be provided by the telephone service provider.

A typical feature code for this is *72 to activate CFV and *73 to deactivate.

You can program these features on the M9316 telephone by do the following:

CFV activate

1) Press the SAVE key.
2) Then select the key where you want to program the feature.
3) Then enter *72 (optional: plus the telephone number of where you want the call to forward to).
4) Press SAVE twice.

CFV deactivate

1) Press the SAVE key
2) Then select another key where you want to program the feature.
3) Then enter *73
4) Press SAVE twice.

Be sure and label your buttons.

To use go off hook and press the key you just programmed.









Posted on Feb 18, 2011

  • 82 Answers

SOURCE: I have a 480i phone.

If this is a new phone that you just set up, be sure that you've looked at your dial plan and have it configured correctly.

Posted on Jul 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get caller id for missed calls for Panasonic kx-t7730


Panasonic KX-TA624/824 automatic Caller ID logging How to set up automatic Caller ID logging
in the KX-TA624 phone system with KX-T7735 phones. (for dash four and five, and KX-TA824)

System Programming:
  1. In System Program number 900, enable Caller ID for the lines you have Caller ID on. (To get into system programming, press Program * # 1234.)
  2. In System Program number 901, select your own area code and any other area codes that don't have to be dialed when making a call. The area code digits are removed from Caller ID log information so you can return a call without dialing unnecessary digits which would mess up the call.
  3. In System Program number 902, if necessary, indicate the number of digits to be removed, and a particular digit (usually 1) that might have to be added, when returning a local phone call. The default programming is to remove the first three digits, and add nothing; which is correct for most locations.
  4. In System Program 903, if necessary, indicate the number of digits to be removed, and up to 4 digits that might have to be added, when returning a long distance phone call. The default programming is to not remove any digits, and add a 1; which is correct for most locations.
  5. In System Program number 909, enable Call Log Assignment for each phone where you want to log Caller ID information. You can use * to indicate you want logging at all phones.
  6. Get out of system programming. (Press Hold or End, then Program.)
Phone Programming:
  1. Program a button for Caller ID Indication on each phone where you want to log Caller ID information. Press Program, then the button you want to use for Caller ID Indication (we recommend the top button in the left column), then 96, then Store, then Hold, then Program. (If you want a phone to record Caller ID information individually, rather than for the whole system, use 6 instead of 96.)
  2. At each phone where you want to log all calls, press intercom, then 7382#.
User Tips:
  • The Caller ID Indication button will light up only when the system has logged UN-answered calls.
  • Use the Navigator Key at the lower right corner of the phone to scroll through Caller ID information.
  • You can erase the entire Caller ID log by pressing Intercom, then 70**#
  • You can erase an individual Caller ID record by pressing Transfer while the information is displayed.
  • If your phone does not have a Navigator Key, you can program an available button for Caller ID Selection. Press Program, then the button you want to use for Caller ID Selection, then 97, then Store, then Hold, then Program. (If you want a phone to record Caller ID information individually, rather than for the whole system, use 7 instead of 97.)
  • To call a number displayed on the Caller ID log, pick up the handset or press the speakerphone button, and press the Caller ID Indication button.

Jul 01, 2015 | Panasonic KX-T7730 Corded Phone

1 Answer

T mobile login to my account


when you make a call from a T-Mobile device, you may choose to block your Caller-ID information, which you can generally do by dialing *67 prior to dialing the called party's number. Refer to the specific instructions for your communication device regarding Caller ID Blocking for other or different dialing instructions. Please note, however, that Caller ID Blocking does not prevent the display of your information when you dial certain business numbers, including 911, 900 numbers, or toll-free numbers. For more specific information or instructions, you may reach a customer service representative by dialing 611 from your T-Mobile phone or 1-800-937-8997 from any phone

Feb 19, 2014 | Computers & Internet

2 Answers

Do I have to dial 9-1 before the area code when faxing?


Hello, If you are in an office or corporate environment where the phone system is on a PBX you need to dial 9 usually to get outside the office. If you just have the unit setup at home or to an analog phone jack (not going thru a PBX) then just dial 1 + area code + number. If the number is local then don't use a 1, just the phone number and area code.
Chris

May 11, 2011 | Ricoh Aficio CL3500N Laser Printer

1 Answer

When a received call comes in the number shows 1-402 then the number.on call back the phone dials all 11 numbers,then i get a recording from windstream that says i dont need to dial the 1 and area code....


The caller ID in your area is set up to show the 1 plus the area code although not every area has yet to require you to dial the 1 before the number. In the near future it's possible you will have to dial the 1 even if you're calling a local number. I know of no way to change the phone settings in order to remove the 1 in the caller id. Unfortunately it looks like your only option will be to dial the number directly without the 1. Good luck!

Dec 10, 2009 | Panasonic Lands Phones

1 Answer

Three party conference call


Once you receive your first call Press conference button. your first call will automaticaly be on hold. Press a line button to dial second number. Once call is connected Press conference button and you will have 3 way conference.
To add more PeoPle into conference Press conference button again and select a new line. Dial the number and Press conference button to connect everyone to that conference.

HoPe this helPs

Jul 17, 2009 | AT&T Lucent MLS-12D Phone

2 Answers

CALLER ID - REDIAL LD NUMBER


Press the caller id and get the number you want, then press the star button, that will add the 1 for long distance dialing.

Jun 01, 2009 | Uniden DECT 6.0 Cordless Telephone...

2 Answers

How to insert a "1" for out-of-state call back


unfortunately most home phones don't have a feature that will automatically enter a 1 when you try to automatically dial a call received. the only way to get around this is to purchase a different phone. i'm sorry to here about your problem.

If you need further help, reach me via phone at https://www.6ya.com/expert/mark_445a24324be9eb03

Mar 01, 2009 | Uniden WIN1200 IP Wireless Phone

1 Answer

Cannot phone Canada


I had the same problem.

The way around this is to dial the number with one of the following codes in front of it:

*67 or *82

Dialing *67+1+(Canadian Phone Number) <SEND> will make the call to Canada, however, your number will not display on the caller's Caller ID display.

Dialing *82+1+(Canadian Phone Number) <SEND> will make the call to Canada, AND your number WILL show up on the caller's Caller ID Display.

I tried it with my Motorola W375 and it works like a charm as of February 13th, 2009.

Dec 08, 2008 | Motorola Mobility W375 Cellular Phone

2 Answers

Using a calling card for a long distance fax


It will surely help if you are using a calling card that has a pinless dialing feature where you don't need to dial your pin. I use Onesuite.com calling card and it has that feature and sending a fax through regular fax machine is easier than having to dial your pin midpoint.

Apr 19, 2008 | HP Photosmart 2410 All-In-One InkJet...

Not finding what you are looking for?
Aastra Telecom 8004 Corded Phone Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aastra Telecom Lands Phones Experts

Jose Ma DM.
Jose Ma DM.

Level 3 Expert

540 Answers

Steve Luck
Steve Luck

Level 3 Expert

819 Answers

ray gallant
ray gallant

Level 3 Expert

64299 Answers

Are you an Aastra Telecom Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...