Question about SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Skyscan digital wall clock just quit showing outside temperature

Just today, my wall skyscan clock quit showing the outside temp. The outside temperature piece is where it always has been. We changed batteries in it thinking that might be the problem but it does not seem to be. Do I have to reset things if you change the batteries to start it up again? I have lost my manual...

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

You probably need to 'pair' the outdoor sensor with the main base: look for a 'channel' button, as these units usually can get information from several sensors and differentiate them by a channel number.

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set up my skyscan temperature transmitter


These devices are very particular about how they are set up. You are supposed to insert batteries in the transmitter first then wait awhile until it gets in the mood to start transmitting. Next, insert batteries in the clock and wait for the two units to begin "talking to each other".

Sep 16, 2014 | La Crosse Technology TX6U Wireless...

1 Answer

My clock quit picking up the atomic signal, even with new batteries installed.


Try temporarily locating it in a different location until it picks up a signal, usually around a window.

Mar 01, 2013 | SkyScan 86709 Atomic Wall Clock

1 Answer

My wall clock quit showing outdoor temp. it has


Wall clock quit showing outdoor temp. Batteries are fresh.

Nov 25, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

My clock is nort showing up the outside tempertute


Seems to be a consistent problem with Skyscan. I have the 88800 model and my outdoor transmitter isn't transmitting the temperature either. We've replaced the batteries in both the transmitter and clock and nothing for outdoor temp. It's only been used for 9 months.

Nov 16, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

My skyscan model 87800 will not show outside temp. i have changed batteries but still get nothing on outside temp


Look in the manual, There should be a section on remote sensors, they usualy have a "sync" button on them. and hit main unit first then remote.

Nov 09, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

No visible outside temp. on SkyScan


Read some other posts on the net and they said to put in new batteries.........bingo!  That did it!

Aug 23, 2009 | SkyScan 86709 Atomic Wall Clock

1 Answer

Outside temperature won't work


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Nov 27, 2008 | SkyScan 86709 Atomic Wall Clock

1 Answer

Outside temperture


Try changing the batteries in the CLOCK. I had the same problem in a 3M similar clock and it didn't read the transmitter correctly or eventually, at all, when the CLOCK batteries were getting low.

Nov 19, 2008 | SkyScan 86742 Digital Atomic Wall Clock

2 Answers

Outside temp on skycam atomic clock


Try changing the battereis in the CLOCK. When the batteries in the clock start getting low, the clock does not pick up the outside transmitter.

Nov 10, 2008 | SkyScan 86742 Digital Atomic Wall Clock

1 Answer

Changed batteries


Please check the following website for all the info and faq.

http://skyscan.info/content/index.php?option=com_content&task=view&id=35&Itemid=40

Also,

If you have lost the outside temperature on the clock display after replacing the transmitter battery then do the following:

1. Make sure you have good batteries installed in the remote transmitter
2. Remove the batteries from the main clock and keep them out until the clock display disappers.
3. Re-install the batteries in the clock.
4. Wait until the display returns and includes the outside temperature display as well.
5. Set the clock again for current time/date etc.
6. Bingo. You are in business.

Sep 07, 2008 | SkyScan 86709 Atomic Wall Clock

Not finding what you are looking for?
SkyScan 86742 Digital Atomic Wall Clock Logo

788 people viewed this question

Ask a Question

Usually answered in minutes!

Top SkyScan Home Experts

The Knight
The Knight

Level 3 Expert

73591 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Rick Goldsmith
Rick Goldsmith

Level 1 Expert

16 Answers

Are you a SkyScan Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...