Question about Soyo DYLM1788 Monitor

1 Answer

I need drivers for my Soyo MONITOR, DYLM017B Model:VT17n71.. Windows 7 is tellin me its out of range

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Hi there,

I've spent a bit of time researching this problem for you and have come up with the following, hope it helps.

SOYO has quoted "All SOYO monitors are Plug and Play monitors. They do not require drivers to work". Recently SOYO went bankrupt so their website is now unavailable for any form of support.

What i would recommend to you would be to temporarily connect a CRT monitor (one of those big bulky monitors) to your computer, as these have a larger resolution and refresh rate capability.
Once you can see Windows 7, change the display settings to the minimum settings for your monitor (as a safe bet i'd set them to 800x600, 60Hz until you connect the LCD). Then connect your flat panel monitor again and set the display settings to an optimal level for you.

Again, i very much doubt that you will need a driver for this brand of monitor, and will be hard pressed to find one.

All the best, and i wish you luck :)

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a driver for soyo monitor


It should be plug and play in MS Windows at least. Cnet claims to have some here

http://www.cnet.com/topic-software/soyo-group-inc.html

Sep 18, 2013 | Soyo Computers & Internet

1 Answer

Soyo monitor MT-NI-DYLM1998 "out of range."


Your windows 7 screen resolution is set too high and your display doesn't support it. There are 3 possible solutions to this problem:
1. Press F8 during startup and choose "Enable row-resolution video"
2. Press F8 during startup and choose "Safe mode" and change screen resolution there, then reboot.
3. You can always use another display (if you have one) to set screen resolution to lower value.

Oct 15, 2012 | Soyo Computers & Internet

1 Answer

My computer has no sound. How do I get a sound driver downloaded?


I will try to locate a driver for you, but please post me back your audio card model (if it is separate) or your motherboard brand / model (if the audio jack is on the motherboard) or your computer model / brand. Also post me back the operating system you use (Windows XP, Vista, Windows 7)

Waiting clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Sep 22, 2010 | Soyo Computer Inc 17" LCD Monitor, Black

3 Answers

When I try to use my 17'' Soyo monitor with Windows 7 program the screen turns black and then ''out of range'' wording is all I get on the monitor. I have tried booting in safe mode, set the resolution to...


When you power up the compute press F8 key then enter in :"Enable vga mode" then go to display property and set screen resolution to 1024*768.
Then check .
If still same then enter in safe mode and uninstall graphic driver then start computer normal mode then install graphic driver.
Also in safe mode go to start->run type in run "chkdsk /r" then press ok then press "y" then restart computer then it fix and recovers error on harddrive.
Let me know if you need further assistance.
Thanks for using FixYa.

Mar 23, 2010 | Soyo Dymond DYLM017A 17" LCD Monitor

1 Answer

After I installed Windows 7 I get ''out of range'' message on the monitor. Soyo 17'' LCD


It is because the PC video output resolution is too high for the monitor to handle, you need to set the PC video resolution to the native resolution of the monitor.

Mar 22, 2010 | Computers & Internet

1 Answer

MONITOR VT17N71, SN C0542C0739 I CANNOT GET THE RESOLUTION THAT I THINK THE SCREEN SHOULD HAVE. I'VE TRIED ADJUSTING THE BRIGHTNESS...BUT IT'S ALWAYS TOO BRIGHT. I'VE TRIED ADJUSTING THE CONTRAST,...


Hi.
Just a general suggestion.
Are the graphics drivers loaded.
(Assuming you are using Windows) what happens when you rightclick on the desktop screen and you click on the Settings Tab

Jan 06, 2010 | Soyo Computers & Internet

3 Answers

Soyo monitor: Out of Range


Out of range indicates that you have attempted to use a resolution the the monitor is incapable of handling.

Lower your resolution and try again until you can get it to do what you wish then try to do each monitors resolution individually.

Aug 24, 2009 | Soyo Computers & Internet

2 Answers

Auto-tune isse


Hi,

you could try adjusting the screen resolution in My Computer/Control Panel/Display this may help.

Also have a look to see if the Adaptor, is set for optimal refresh rate.

Mike @ Compurepair.

Sep 16, 2008 | Computers & Internet

Not finding what you are looking for?
Soyo DYLM1788 Monitor Logo

Related Topics:

697 people viewed this question

Ask a Question

Usually answered in minutes!

Top Soyo Computers & Internet Experts

Roy May

Level 3 Expert

432 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Matson Kurian
Matson Kurian

Level 2 Expert

174 Answers

Are you a Soyo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...