Question about Televison & Video

1 Answer

Tv problem hitachi tv goes into stand by on its own

Posted by on

  • aassddff Jan 22, 2009

    I have no picture now but my set would go in stand by mode. My set is 60ex38b Hitachi,1998. It has never had an issue but I was told it was my main board. As you remove the cover and the protection wall it lays flat on the bottom. I already now it's high voltage. I use to bump the blue wired connector to enable a picture again on the left side of this board. I have no part # to replace the board. Now I have no picture if the connector is wigled. I need part # because I am not ready to part with my rear projection t.v. as of yet. I have sat service, so need for a digtal convertor box-I want my t.v. back in optium performance again. Please someone have a part #.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 375 Answers

Whats model and type of unit/age also.

Posted on Mar 28, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The red power light comes on but nothing else works on my hitachi 53FDX01B PROJECTION TV


silly question but have you tried turning it on with the remote. if a tv has been turned off by remote and then power goes, turning it on by the tv switch will put the tv back in stand-by mode and you need to use remote.

just a suggestion.

Dec 13, 2013 | Hitachi 53FDX01B 53" Rear Projection...

1 Answer

Need Stand for Hitachi L42VK04U


Contact the authorized dealer for Hitachi.

Dec 03, 2012 | Hitachi HL01453 Remote Control

1 Answer

Hi, we have just bought a second hand Hitachi Hi Plasma TV Model PD1, 42PMA400A. We have a wall bracket but what we'd eally like is a stand ... the base plate and two stems that go into the bottom of...


If you search on Ebay for your TV's exact model number, sometimes you can find a replacement stand for it there from someone who has their TV mounted to the wall and is no longer using it. These are normally fairly heavy and bulky items, so Ebay purchase prices and shipping costs can vary widely.

I did not see any for your exact model of TV available there when I looked, but the online selection changes daily, so you can always keep checking back. Just search on Ebay for 'HITACHI TV STAND' or 'HITACHI TV BASE' and you will see a wide variety of them available for different Hitachi TV models as well as what the average price for them is.
Otherwise you can just buy a generic wall mount floor stand for around $100 which bolts to the TV like a wall mount, but actually sits on the floor instead of being bolted to the wall.

Here are some links to a few different models currently available on Ebay which include pictures so you can see what I mean:


http://cgi.ebay.com/PLASMA-LCD-FLAT-PANEL-MOUNT-TV-STAND-WALL-SHELF-STAND-/390330001764?pt=LH_DefaultDomain_0&hash=item5ae17b2964



http://cgi.ebay.com/Plasma-LCD-Flat-Panel-Console-Shelf-Wall-Mount-TV-Stand-/270797719452?pt=LH_DefaultDomain_0&hash=item3f0ccd479c



I hope that was helpful to you, good luck and take care.

Joe.

Aug 30, 2011 | Hitachi Televison & Video

1 Answer

Picture goes bad (fuzzy&scrolls&lines) on Hitachi projection tv


Sounds like your convergence modules have gone bad. They have 21 close spaced pins to unsolder and resolder. You'll need a soldering iron with a fine point tip and thin gauge solder to do the repairs yourself. Solder bridges between pins are common when soldering these module pins, so have some unsoldering wick handy if you're going to fix it yourself. You can get parts from here: TV Parts Universal TV Stands DLP Chips ShopJimmy

Jun 14, 2017 | Hitachi 50UX57B 50" Rear Projection...

5 Answers

I need a tv stand for Hitachi 42EDT41A


i have a stand for that tv and live near nashville. still need 1 ?

Jan 23, 2009 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

4 Answers

Hitachi 50v500


For $350.00!!!!

Absolutely!!!

Just do not expect it to be a great picture for long but, you never know you may have a rare good one. For that price I would put it
in the garage and have something special to watch the games on. Even if it goes bad the lamp is almost worth that in some circles.

May 28, 2008 | Hitachi 50V500 50 in. HD-Ready LCD...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74630 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...