Question about Televison & Video

2 Answers

Resetting bulb tyla1000

I replaced the bulb on the panasonic television and i do not know how to reset it with the remote.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Don't have a remote can I reset my lamp time? I have a Panasonic PT52LCX35

Posted on Apr 10, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 208 Answers

Most modes can be reset by holding the volume down button on the tv until the volume is all the way down. Continue to hold the volume down button on the tv and while depressing the volume down button on the tv press and hold the pip button on the remote until the reset message appears on the screen. Some models are different and while depressing the volume down button on tv press and hold the split key on the remote. Most times these instruction come inside the lamp box you purchased.

Posted on Mar 29, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 6 yr old Panasonic PT 50 LC13 and I need to know how th reset the lamp. i just replaced the bulb and i cannot get the tv to turn in


To reset the lamp follow the steps below.

Press and hold "Volume down(-)" at the front panel and "TV/Video" on the remote control for more thatn 5 secs in power off condition to activate the Service mode map. You can now reset the lamp.


After that check if the symptoms still there. If yes, let me know the status of the led light(Power, Temp, Lamp) and its color to determine where the fault came from.


Jdvillanueva

Sep 08, 2011 | Panasonic PT-50LC14 50" Rear Projection...

2 Answers

The lamp light is blinking once every 5 seconds. The manual says that " Lamp will not light or light is abnormal"


HI,

Panasonic PT50LC13 lamp indicator blinks to tell you the lamp is faulty.

You need to replace the bulb or TY-LA1000 lamp assembly. This link displays all Panasonic TV Lamps and TV Bulbs. This page shows Panasonic lamp location and How to Replace TYLA1000 bulb. TY-LA1000 Bulb Replacement requires the use of a long Philips Screwdriver to reach screws within the lamp cage.

Unplug AC power before removing the lamp and re-install all doors, etc, correctly before starting the TV. Vacuum any visible dust or lint from air vents and lamp area. Do not used forced air to blow out dust, big problems may result.

The user's manual has a description of what the Blinking LED indicators mean.

easyab.jpg
Image of TYLA1000 lamp.


Robert

Apr 14, 2011 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Were do u replace bulb on this model


According to my source, you should be able to follow this guide. It's not explicitly intended for your model, but should be compatible. http://www.fixyourdlp.com/wp-content/uploads/2007/09/panasonic-tyla1000-lamp-instructions.pdf

Feb 28, 2011 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

I think a bulb is out how would you know?


Look into lamp, you'll see a glass cylinder with a bulb at the bottom. White or black buildup inside means bad bulb. Also the spherical bulb can deform by heat - bad bulb as well.
When you replace a Panasonic bulb you must reset the lamp timer.

Jan 17, 2011 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Reset lamp timer panasonic tv


PT-43LC14/PT-50LC14/PT-60LC14.
1) Make sure the TV is on.
2) While pressing and holding down VOL DOWN button on the TV, press and hold down SPLIT PLAY button on the remote until a message appears on the screen that the lamp timer has been reset.

Good luck
Note: I got it from here: http://www.dlplampguide.com/tyla1000.html

Dec 13, 2010 | Panasonic PT-43LC14 43" Rear Projection...

1 Answer

Replaced lamp bulb on panasonic pt52lcx66, reset lamp hour meter and red light is still on. Any ideas?


Pull the lamp out and install again and reset with the orignal remote control. (not a universal)

Jun 02, 2010 | Panasonic PT-52LCX66 Projection Television

1 Answer

I have replaced the bulb but still keep getting a Reset Notice


Hold Vol - on tv and TV/Video button on remote same time for 5 seconds. serv menu will come up. select lamp time and reset with vol- on remote to zero. Turn off tv to remove menu.

Nov 22, 2009 | Panasonic PT-61LCX65 61" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74630 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...