Question about Hotpoint 23 in. BFI62 Built-in Dishwasher

1 Answer

Doesn't clean my dish washer seems to work fine but when its finished the tablet i put in the door is still in one at the bottom of the dishwasher and the dishes aren't cleaned properly. i've checked it about halfway through and the water does get hot. please help.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 185 Answers

Is your water heater set at 120 degrees if not set it to it

Posted on Mar 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a model GU2300XTVQ Lately we have fine brown residue on the bottom and door of the unit whenit finishes washing. The dishes seem clean. Is there a filter or something we need to clean?


Hi,

The scum, film and white residue problems have started since the reduction of phosphates in dishwasher detergents.

Here is a tip that will help you to solve the problem of films, residue, and scum in your dishwasher.

Dishwasher Residue and Film on Dishes

heatman101
-=\=\=\=\=\=\=\

Feb 07, 2011 | Whirlpool GU2300XTVQ Builtin Dishwasher

1 Answer

Dishes are not getting clean, detergent just runs down the door used tablets they worked until lately. The door would open but the tablet would not disolve. Now I use liquid but it just runs down the door...


Quickest way to ruin a good dishwasher is to use tablets. They have times when they don't brake down in the water like they were designed. Chance are that you used the tablets with the thin film package, this thin film gets caught in the pump and shut down water circulation. Have a qualified tech pull motor assembly apart for you and clean.

Nov 12, 2009 | GE Nautilus 24" Built-in Dishwasher

1 Answer

My Hotpoint Aquarius diswasher won't dissolve the washing tablets


I don't have a solution, but the exact same problem is happening with my dishwasher. Nothing is getting cleaned properly.

Did you manage to get the problem fixed?

Jun 01, 2009 | Dishwashers

1 Answer

Whirlpool quietpartner I Dishwasher wont clean anymore.


you need to take the blades that spin out and clean them off they have grime on them, is there water still in the bottom of the dishwasher when done> if so there is a plastic grate in the bottom rear of the dishwasher you need a 1/4 inch nut driver take the cover off and clean the debris out, there is a small stainless steele cutting blade in there be careful, it is to cut up foods that might not be washed off before putting dishes in the washer, also it is pressure that makes the detergent door open make sure you are getting full pressure comming into the waher, if non of this works the pump should be replace or it;s new dishwasher time

May 30, 2009 | Dishwashers

2 Answers

Dish Washer


If you live in a hard water area the 5 in 1 tablets will only work half way. Consider Calgon powder or the tablets which can be left in the dishwasher cutlery basket as an additional measure. Hard water areas are notorious for leaving chalky residue on cutlery regardless of 3 in 1/5 in 1 tablet promises. 
Also your dishwasher will require rinse aid too as most machines need this to mix in with the general water and soap solutions when the dishwasher is on its final rinse.

Apr 19, 2008 | Zanussi 24 in. DE6744 Free-Standing...

2 Answers

SMEG DISHWASHER - SUPPLIER CODE : SA8605XTD


Hi, I don't usually put the tablet in the door holder. I just place it in the bottom of the washer . I aways am concerned that there will be soap residue. So this way utensils are getting washed as soon a the washer commences .I usually scrape debris off plates and utensils before I put them in the dishwasher. This works well. Hope this works well for you. Teresa

Jan 12, 2008 | Dishwashers

2 Answers

Ariston LS620A


hey,
I experienced the same problem and I realized it happens when you block the water from the dispenser with a dish. Make sure that it is never blocked and the dishwasher is going to work fine

Oct 10, 2007 | Ariston Technologies LL64WNA Built-in...

1 Answer

Dishes not being cleaned properly - large portion of tablet still remaining in the bottom


I have a 4114 and the problem was not enough water entering the washer. You can check by adding extra water (kettle full) to the washer just after start. ( opening the door just suspends the cycle) If your dishes clean well then you will need to adjust the pressure level switch to allow more water in. There is an adjustment screw on the switch which needs to be turned 1/4- 1/2 a turn. This puts more tension on the spring so more water needs to enter before the switch is activated. On the 4114 the switch has 2 adjusters. It is the taller of the 2 that require adjusting. Do little turns until the water level just covers the filters.

Nov 18, 2006 | Electrolux 18 in. ESL4114 Slim-Line...

Not finding what you are looking for?
Hotpoint 23 in. BFI62 Built-in Dishwasher Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

bosch5

Level 2 Expert

157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...