Question about Washing Machines

1 Answer

Washing machine Hi, All of sudden my washing machine won't fill with water, it's just a trickle. I took off the hoses to make sure they were clean, I cleaned the mixing valve and the took the hose off the back leading into the washer and nothing works, is it the pump, I can hear it. Janice

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 185 Answers

Please.........make and model number

Posted on Mar 28, 2008

  • william ludolph Mar 28, 2008

    did you clean the screens inside the mixing valve

×


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool lsb6000pq2 washing machine won't fill with water


Humming could be a blockage on the fill solonoid valve remove water fill hose and clean the filter at the valve it pulls out or use an old toothbrush

Jun 26, 2012 | Washing Machines

1 Answer

Tap to washing machine is working fine, but water only trickles into the machine when filling. What can I do? Hoover washing machine model 200 MONZL


hi just read your posting.1st remove both inlet hoses from the taps and the machine.Check if there are little filters on the ends of the hoses,They could be blocked.Next check the filters on the water valves.The water valves are where the hoses connect to the machine.If the hose and water valve filters are clean then you will need to replace the water valve.Did you check how much water pressure is coming out of the taps?Please reply on how you got on and with additional information and I am sure I can help you on this problem.Looking forward to your reply.

May 20, 2011 | Hoover Washing Machines

3 Answers

Machine won't fill up with rinse water, it washes & spins but the water only trickles in the rinse cycle, i ahve been filling it up manually


Turn the water supply off.
Remove the COLD water hose from the rear of the washer.
Clean the silt out of the COLD water valve on the washer.
Re-attach the hose on turn on the water supply.

Jan 21, 2011 | GE WBSR3140DW Top Load Washer

1 Answer

When we use the cold water it is just trickling in. I cleaned the water inlet screen for the cold water on the back of the machine but it is still only a trickle. Is there another screen inside the back...


Hi,
Often there is a screen at the inlet of the hose also...


If your washing machine will not fill, only hot or cold will fill or is slow to fill then read these tips. I have covered many of the things that can happen in these tips…


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101


Sep 06, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Kenmore 90 Series Washer : cold water fills at just a trickle:


your hot water goes through the water heater so contaminates settle in the heater. the cold does not, there is a screen inside the fill valve where the hose hooks to the valve on the machine. if this in not plugged then the fill valve will have to be replaced. because of the build up of contaminates..

Jul 08, 2009 | Kenmore Washing Machines

1 Answer

Rinse water barely trickles out of my washer


Do you fill the machine with hot water only?

If so, this is what I suspect. The filters in the inlet hoses on the back of the washer need cleaning. Remove the garden hose connectors, remove filter, clean, replace.

When filling with hot only you get a lot of pressure thru one hose. When you rinse, the best you can do pressure-wise is cold rinse -- but the cold water filter is going to be more clogged than the hot so it delivers less water.

When you use warm rinse, you get mediium pressure thru both lines, again less water than al hot on filling the machine.

Apr 29, 2009 | Washing Machines

2 Answers

Hot Water runs in fine but the cold only trickles into Washer,


There are 2 hoses. Hot and cold and if the nobs are not turned wide open then it will not give you the water like you want. Check to make sure that the hot water nob is turned to were the water should come out like the cold. If not that then check the water heater and see if it is set up the way it needs to be.
Nikki2913

Dec 02, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

No water for rinse cycle


Take the fill hoses off the machine and clean out the filter inside, right where the hose attached to the machine. Also, check to make sure there are no filter washers in either end of the supply hoses. Sounds like you only have to check the cold water side in this case.

Nov 08, 2008 | Whirlpool Washing Machines

1 Answer

Washer fills slow only in the rinse cycle


ck and clean screens first both sides be sure hoses are not reversed timer has no affect on fill rate if screens are clean replace valve

Sep 19, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...