Question about GE 31GT660 TV

1 Answer

My GE TV 6-8 years old maybe tube type 36 inches?? Sorry dont have the model.# with me. The cable DVR remote control got stepped on. Immediately the tv went crazy, strange menus popping up almost complete loss of control of the TV. Sound went dead the TV's Guide menu keeps comiung up saying there is no data. The TV moved from Chanel 3 for the cable box to 120 or some other channel. It's a mess. I can hardly ever access any of the TV menus as they pop up and dissapear. Occasionally I can get the tv back to channel 3 using the channel up and down on the TV panel takes for ever because the guide menu keeps popping up. Also now the Cable Remote power will not turn the TV off, the TV front pannel power button no longer functions. If I mess long enough I can usually get a picture back and sound buit it plays for undetermined time then the TV menus start popping back up by themself. When I get it viewable through the DVR box, I have to use the DVR remote to control volume and channel because if I use the TV's remote all goes grazy again regardless of which button I press. Strange because it was the DRV remote that was stepped on. I have replaced both the CAble DVR BOx and the DRV remote control. I think I need to completely re set the TV but cant get to that point. Help Thanks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 88 Answers

You could do it to setup to a/v input . then try to set up to menu to do setup.if not . you tv need change epprom ic. good luck!

Posted on May 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv_weight, curtis mathis 36 inch tube


Hello
The TV you specifies here [Curtis Mathis 36" picture tube type] has a weight of 150.3 lbs. OK.

Oct 19, 2011 | Televison & Video

1 Answer

IVE GOT THE CODE, NOW HOW DO I PROGRAM IT? CANT REMEMBER THE PROCESS AND STEPS?


Hello April,

1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., VCR/PVR,
DVD,CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume,and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer's Codes (starting on page 36) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device
code in the following boxes:
VCR/PVR Code:
Device Type:______________
DVD Code:
Device Type:______________
CBL/SAT Code:
Device Type:______________
TV Code:
Device Type:______________



You can rate my answer if you appreciate my help.

Thanks!

Oct 17, 2011 | One For All URC4220 Remote Control

1 Answer

I was just given a 36-inch RCA Gemstar Guideplus Gold TV. I do not have cable and am unable to tell if it is digital or not. I've been told it is less than 6 years old. It is a tube TV.


RCA made only two 36" televisions between 2004 - 2010 and neither one of them have digital (ATSC) tuners. They made ZERO CRT televisions before that with digital tuners.

Apr 23, 2011 | Televison & Video

1 Answer

Hot to program the remote for a mitsubishi tv


Hello
Codes for Mitsubishi with one for all URC 4220 are:
0093, 0150, 0178, 1250

The One For All 4 Device Universal Remote Control is preprogrammed at

the factory to operate an RCA TV, a Toshiba DVD player, aMotorola cable

box, and an RCAVCR.To control devices other than the default brands,performthe

following steps; otherwise skip this section:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if

applicable, insertmedia (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program

before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR,

DVD,CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press VCR/PVR once.After programming

a VCR Combo device, you will be able to control channel selection,

volume,andVCR functions.

NOTE: To program control of a DVD Player,DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD once.After programming

a DVD Combo device, you will be able to control channel selection,

volume, and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)

Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,

then release SET.

4. Use the Manufacturer's Codes (starting on page 36) to

locate the type of device and brand name and then enter

the first four-digit code for your device. If performed correctly,

the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter

the same code again.

5. Aimthe remote control at the device and press POWER

once.The device should turn off. If it does not, repeat

steps 2 through 5, trying each code for your brand until

you find one that works. If it still doesn't work, try

Searching For Your Code on next page.

NOTE: If the device does not have a POWER key, press PLAY.

6. Repeat steps 1 through 5 for each device you want to control.

For future reference,write down each working device
code in the following boxes:
OK.

Feb 26, 2011 | One For All URC4220 Remote Control

1 Answer

I have an old RCA TV (about 20 years old). I got the TV from a friend and she could not find the remote. I bought this remote but I cannot find the correct code to get it to work. Are there other codes...


HI,

Direct Code Entry:

Find the code your device.


1. Press and hold "CODE SEARCH".


2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


3. Enter the 3-digit code number.


4. Release "CODE SEARCH".


5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes


Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".


3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


4. Release "CODE SEARCH".


5. Press ON/OFF repeatedly until the device turns off.


6. When the device shuts off press and release ENTER.


7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

Thank you

Sep 13, 2010 | RCA RCU410MS Remote Control

1 Answer

I am trying to program my urc-4220 all for one remote to my tv and dont know how, i have an older zenith tv and need to know the steps to programing it to my tv


1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program before starting step 2.
2. On the remote control,press a device key once (i.e.,VCR/PVR,DVD,CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once. After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer’s Codes (starting on page 36) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.


Download the full manual for FREE with codes included from http://www.replacementremotes.com/One-For-All-Manuals/Download-FREE-URC4220-MANUAL-OPERATING-MANUAL.html

Aug 11, 2010 | One For All URC4220 Remote Control

1 Answer

I have and old floor modal tv in good condition I have a Rca universal remote that I dont have the program codes and cant seem to fine them online


Hi,

As we dont know the TV make you can use code search method.
It basically searchs the codes automatically.

follow the below steps to set remote without codes

Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".


3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


4. Release "CODE SEARCH".


5. Press ON/OFF repeatedly until the device turns off.


6. When the device shuts off press and release ENTER.


7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

If you can find the codes for your /tv please follow the below steps

Direct Code Entry:

Find the code your device.


1. Press and hold "CODE SEARCH".


2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


3. Enter the 3-digit code number.


4. Release "CODE SEARCH".


5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

Thank you

Aug 07, 2010 | RCA 6-Device Universal Remote

1 Answer

Need code for a rca coder for a ge tv



HI,

Direct Code Entry:

Find the code your device.


1. Press and hold "CODE SEARCH".


2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


3. Enter the 3-digit code number.


4. Release "CODE SEARCH".


5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes


Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".


3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


4. Release "CODE SEARCH".


5. Press ON/OFF repeatedly until the device turns off.


6. When the device shuts off press and release ENTER.


7. Try using the remote. If it does not function repeat steps 1 through 6


Hi,
To get the code please go to below website

http://www.rcaaccessories.com/remotefinder/

Please
Provide model of your remote
device to be programmed (VCR,TV)

Thanx

Jul 30, 2010 | RCA RCU300WBL Remote Control

2 Answers

Universal TV remote control


Target sells a GE Universal Remote Control, 5 Device with learning feature. I can't say if it works with your Verizon DVR, but its code for the Akai LCT3285TA is 1139. If you have the Verizon's remote, you should be able to use the learning function to make the GE control it - that's if the GE doesn't have a built in code that will work for this DVR.

Apr 26, 2008 | Akai LCT3285TA 32 in. LCD Television

Not finding what you are looking for?
GE 31GT660 TV Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a GE Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...