Question about OKI C5200n Laser Printer

2 Answers

Oki 3300 change toner in oki 3300 but its still saying its empty

Posted by on

  • jenbro Dec 12, 2008

    I have the same problem and no matter what it will not clear.!!



    It is a genuine OKI cartridge and now refuses to print and light is flashing

    This is the second printer I have bought and some small thing like this keeps it from working .



    (I am ready to try some other brand)



    John J.

  • Jeff Hughes May 11, 2010

    Did you replace it with a brand new toner?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Take all the consumables out, turn off the printer on the botton on/off. Then unplugged the wire from the wall. With the wire plugged off, turn on the printer. That will reset the memory printer and may solve your problem. Then turn the wire and turn the printer. Put all consumables when the printer give the error. Put one by one.

Posted on Jul 04, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 97 Answers

When installing the C3300 printer, or when replacing the toner cartridge, be sure to fully insert the toner cartridge into the image drum, and make sure the blue lever is pushed ALL THE WAY toward the back of the printer (fully locked position). If it is not fully closed (locked), a "toner sensor" or "toner empty" message may result.
oki 3300 - moz-screenshot.jpg

Posted on Dec 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why Oki b4600 after changing drum devolves toner empty


The toner cartridge is only a supply chamber. The cartridge simply dumps toner into the feed hopper in the drum. When you change the drum the feed hopper is empty and it is likely that the cartridge dropped the last of it supply into the hopper - ergo it is now empty. I recommend shaking the toner back into the cartridge before separating the cartridge from the drum unit when changing them

Sep 08, 2014 | OKI B4600 Printer

1 Answer

My Oki C5800 says "Replace Belt, 355: Belt Life" but I was told I could reset it without changing it if it was still good. How?


requires a fuse that sits underneath the transfer belt. However the belt itself would be full of waste toner that would need to be emptied

Jun 30, 2010 | OKI C5800Ldn Led Printer

4 Answers

Emty error with new toner. Oki B410


What a usless "solution"...Do you have something that can accually work?
There is a procedure that will solve this issue. I have a new toner inserted and it keeps crying that the toner is empty...I have taken in out and put it back in, Now how do I reset the **** thing?

Mar 06, 2010 | Oki Electric Industry B410D Laser 30PPM...

1 Answer

Changing the toner cartridge in an oki b4350


Is it a OEM cartridge, which means that its made but the manufacturer of the printer. If it is a refurbished cartridge then it will probably not be "recognized" by the printer and subsequently tell you its low on ink.

Jun 23, 2009 | OKI B4350 Laser Printer

1 Answer

OKI 3300 Image Drum Problem


Did you remove the plastic tape from the new cartridge?

Feb 16, 2009 | Oki Electric Industry C3300n Laser Printer

1 Answer

Toner sensor error on an Oki C3520 Laser


Check the little switch/door on the right hand side of the drums.
This has worked successfully for me.

Symptom:
After replacement of a C3530 Image Drum, the message, "Toner Sensor Error" is displayed.

0.10a?openelement&fieldelemformat=gif




Cause:
The plastic shutter in the ID is fully or partially covering the toner sensor window.




Resolution:
Move the cover upward to allow for the sensor to become fully exposed prior to reinstalling the drum.

0.106?openelement&fieldelemformat=gif











moz-screenshot-2.jpg

Oct 18, 2008 | OKI Electric Industry C3520 Laser Printer

3 Answers

Oki C3200n Says Order K Toner after install


Two possible problems:
1. You actually got a partially empty new toner. This has happened to me once.
2. The sensor on the printer is dirty and not seeing the toner. With the toner there is a little wipe that says it is for cleaning the LED. There is an LED sensor that "reads" the presence of the toner. If this is dirty it will think there is no toner cartridge.

Jul 09, 2008 | OKI C3200n Led Printer

2 Answers

How to overcome the "Toner Empty" message?


hmmm..that toner empty issue is built into most printers, and it's not something that you can fake out, in most cases. Oki is telling you the straight stuff, here.

May 01, 2008 | OKI C3400N Single Pass Color Printer

Not finding what you are looking for?
OKI C5200n Laser Printer Logo

911 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

386 Answers

SiNnA
SiNnA

Level 1 Expert

38 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...