The screen won't get on.If I hook it up in another it work

Master reset with hardware keys A master reset restores the original factory settings and may delete your personal data on the internal storage, such as downloaded content, ringtones, images, apps, and contacts. It does not delete data stored on the SIM card or SD card.
If the device menus are frozen or unresponsive, you can master reset using hardware keys. To perform a master reset, follow these steps:

1. Back up all data on the internal memory. You won't be able to since there is no display.
2. Turn off the phone.
3. Press and hold the Power and Volume Up keys simultaneously.
4. Continue to hold the keys past the T-Mobile splash screen.
5. Release all keys when the Android system recovery screen appears.
6. Press the Volume Down key to highlight 'wipe data/factory reset.'
7. Press the Power key to select.
8. Press the Volume Down key to highlight 'Yes -- delete all user data.'
9. Press the Power key to select. The unpacking Android screen appears, and once complete with the reset, the Android system recovery screen reappears.
10. Press the Volume Down key to highlight 'reboot system now.'
11. Press the Power key to select. The phone will automatically restart.

same problem with me too.. i was told to reset the phone and it worked fine.:)
1.Power off the phone.
2.Press and hold Vol+ key and Power key simultaneously for about 10 seconds until the some option appear on the screen which are reboot system now; apply update from sdcard; wipe data/factory reset; wipe cache partition.3.Use Vol+ key and Vol- key to move the cursor to "wipe cache partition" and press camera key to confirm it.
4.After 5 seconds, the cursor will be on "reboot system now" again and press camera key to confirm it. The phone will reboot automatically.dont forget to backup important data to you sdcard.this will save your information.

reboot your computer and run normal, then hit FN keys and hit the key that has a monitor picture..usually on the f1- f12 keys do it both at once it should send the signal to the tv

TI calculators have an annoying habit of dimming the screen when the batteries are changed so that it appears as if the calculator isn't turning on. Turn the calculator on (or at least press the ON key). Press and release the 2ND key. Press and hold the Up-arrow key for a few seconds and see whether the screen becomes legible.

Try holding in the function key (very bottom left key labeled Fn) and pressing F7. If that doesn't turn the screen back on, hold it again and slowly press F8 a few times. That should turn the screen back on if it was accidentally set to a different monitor, which seems to happen randomly on laptops.
If you can see a very faint image when its held at just the right angle, then you probably burned out the back-light.
Keep in mind, if you bought it in the last year, it is still under manufacturer warranty.

step one, big battery out? skipped that?
step 2, a good power pack , that means 19vdc on those 2 pins.
bingo BIOS screen now work ,yes?
step 3, try an external VGA screen at the P15 VGA jack there
screens work now (BIOS first) yes/no?

remove DVD, drive
and all USB devices
there booting with only 1 memory stick. (got more?, try each 1 by 1)
black screens of *****'.

the lack of flash codes, Implies Power pack is dead. or CPU overheated, and selfshuts down. that fan going dead tells
me the power park is dead.

http://pcdied.com/#black-screens

The F4 button on laptops usually controls the second monitor. Try plugging it in and holding F and press F4.

Try clicking on the fn, f3, or f7 key. It sounds like it's locked. Different functions keys work for different kinds of computers. It should have a keypad emblem with an x across it.

If you type in Administrator, and press enter, then it should bypass your password.

Thank you for contacting Fixya.
Does this help? Let us know.

Mary Oliveau

Ponder/Meditate/Pray for Peace.

there is a button sequence to display from laptop to TV

Try Fn+ F5 look at the function keys you should see a TV icon from laptop on key press this with the Fn key as it may be slightly different fkeys with models

Please rate my help++++Thanks for using FIXYA

Flip ipen the front face of the remote control so that you have access to the buttons underneath. Press and hold the "light" button on the outside right of the remote while pressing the "enter" button to the right of the number "1" button.

THIS WON'T WORK IF YOU HIT THE "enter" BUTTON BETWEEN THE ARROW KEYS.

The screen should now flash PRESS and VCR 2 - press the onscreen key marked VCR 3.

The screen should now flash PRESS aqnd OSD - press the onscreen key marked OSD.

Test all of the onscreen keys. If you find them still unaligned, repeat the process.