Question about Acer Computers & Internet

1 Answer

When I turn on my computer. It immediately takes

When I turn on my computer. It immediately takes you to type in your password. After I do this I cannot go any further. Immediately I receive the following message: The user profile service service failed the logon. User profile cannot be loaded.
I cannot go any further, so I cannot do any updates. I'm wondering how to fix this, as I have hundreds of pictures of my little girl, and I was just in the process of burning them onto a disc when this happens. I do not want to lose them all. I just want my computer fixed. Can you help, without me having to pay for an extra expense. Please tell me this error message is not some crazy one, where I will never see my pics again. Please note, my computer is an ACER computer, and my internet provider is Rogers.

Thank you very much.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

Try in safe mode it might have another default logon

Posted on May 10, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My child entered a password and we don't know it. How do I reset the password?


How far does the computer get before it requests the password? If it comes up immediately with a black screen and white letters requesting a password, you will want to open the door on the bottom side of the laptop, where you see a small, coin-type battery or coin-battery pack. You want to have the computer completely off, take out or unplug that battery for a couple of minutes, and then replace the battery and turn it back on.

If it is on a website, you can click on the link that says "I forgot my password" and it will allow you to change the password there. If none of these suggestions work, please let me know a little more information and I will be able to help.

May 10, 2014 | Computers & Internet

Tip

Toshiba Laptop BIOS Password Removal


<span><b>ESC Key BIOS Password removing procedure</b><br />1. Starting with the computer fully off, turn it on by pressing and releasing the power button. Immediately and repeatedly tap the Esc key. The computer will display the "Password = " prompt.<br />2. Enter the correct password, and press the Enter key. The computer will display "Valid password entered, system is now starting up. Check system. Then press (F1) key"<br />3. Press the F1 key. The BIOS setup program will appear.<br />4. Using the arrow keys or the tab key, move to the password field, and highlight REGISTERED.<br />5. Press the spacebar, enter the correct password, and press the Enter key. The Password field will change to NOT REGISTERED.<br /><b><br />F2 Key BIOS Password removing procedure</b><br />1. Starting with the computer fully off, turn it on by pressing and releasing the power button. Immediately and repeatedly tap the F2 key. The unit will display the "Password = " prompt.<br />2. Enter the correct password, press the Enter key. (You may need to press the F2 key after you hit the enter key.)<br />3. The BIOS setup program will appear.<br />4. Using the arrow keys, move to the Security tab, and to Set User Password.<br />5. Press the F5 or the F6 key to navigate to the Password section. Enter the current password at the Old Password prompt, and press Enter. At the New Password prompt, press Enter (without typing anything into the password field). At the Confirm Password prompt, press Enter again (without typing anything into the password field). The password should now be removed.<br />6. Press F10 to save and exit from the BIOS Setup program.<br /><br />In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.<br /><br />If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.</span>

on Jun 09, 2011 | Computers & Internet

2 Answers

Still cant get pass the bious password for a HP pavillion p6 series desk top computer


Have you tried a fresh install? maybe that will clear everything up.

Apr 04, 2013 | Computers & Internet

1 Answer

How do i undo my system password?


System Password? No Such Thing!!!

The Three Types of Passwords are:
Bios Password - which is a password the comes up before the machine will even start booting. If you set this password, you should know it. The only way to remove a Bios Password if the take the laptop apart and remove the CMOS battery that is on the motherboard and let it sit for an hour or so until the computer completely loses memory of everything including the date, time, passwords.

Hard Drive Password - The hard drive password is set by the owner of the laptop to prevent thieves from getting to sensitive data if the laptop is stolen. 99% of the time if someone don't know the Hard Drive Password, then the laptop is stolen. If you're smart enough to set the hard drive password, then you should be smart enough to remember it. The real owner can sometimes set the password remotely once the laptop is stolen. The only way to remove the hard drive password is type in the correct password.

Windows Password - This password is associated with a user id that shows up once windows has completely booted up. If you forgot this password, it can be reset depending on the operating system.

Windows 7 requires a Password Reset Disc that everyone should take the time to create if they want to use a password on their user account. Without the disc that was created on that computer you won't be able to get in.

Windows XP and Vista - Turn off the computer, then turn it back on and immediately start hitting the F8 key repeatedly until you see SAFE MODE. Select Safe Mode and let the computer boot. When it comes to the login screen it will show the Administrator account and the user account for which you forgot the password. Click on the Administrator account and just click ok or enter for the password (hopefully you didn't create an Administrator's password and forgot it too). When you see the windows desktop in safe mode it will look differently. The icons will be bigger and the screen darker, but that is normal in safe mode. Click Start/Control Panel/User Accounts and select the user account for which you forgot the password, then select REMOVE PASSWORD, click OK and reboot your machine. This time let the computer boot up as it normally would.

Mar 25, 2012 | Toshiba Computers & Internet

1 Answer

I am trying to restore my laptop to factory settings coz I had a virus and as soon as i had pressed F10 after the Windows logo it is asking for a password. But I do not have one. Can you help?


ESC Key BIOS Password removing procedure
1. Starting with the computer fully off, turn it on by pressing and releasing the power button. Immediately and repeatedly tap the Esc key. The computer will display the "Password = " prompt.
2. Enter the correct password, and press the Enter key. The computer will display "Valid password entered, system is now starting up. Check system. Then press (F1) key"
3. Press the F1 key. The BIOS setup program will appear.
4. Using the arrow keys or the tab key, move to the password field, and highlight REGISTERED.
5. Press the spacebar, enter the correct password, and press the Enter key. The Password field will change to NOT REGISTERED.

F2 Key BIOS Password removing procedure

1. Starting with the computer fully off, turn it on by pressing and releasing the power button. Immediately and repeatedly tap the F2 key. The unit will display the "Password = " prompt.
2. Enter the correct password, press the Enter key. (You may need to press the F2 key after you hit the enter key.)
3. The BIOS setup program will appear.
4. Using the arrow keys, move to the Security tab, and to Set User Password.
5. Press the F5 or the F6 key to navigate to the Password section. Enter the current password at the Old Password prompt, and press Enter. At the New Password prompt, press Enter (without typing anything into the password field). At the Confirm Password prompt, press Enter again (without typing anything into the password field). The password should now be removed.
6. Press F10 to save and exit from the BIOS Setup program.

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Jun 09, 2011 | Computers & Internet

1 Answer

I m unable to open my bios setup utility, I hav IBM A51 8122 KQP desktop.


To start the Setup Utility program, do the following:

1. If your computer is already on when you start this procedure, shut down the operating system and turn off the computer.

2. Press and hold the F1 key then turn on the computer. When you hear multiple beeps, release the F1 key.

Notes:

a. If you have a USB keyboard installed on your computer and the Setup Utility does not display using this method, turn on the computer, then immediately press and release the F1 key repeatedly until the Setup Utility displays.

b. If a user password or an administrator password has been set, the Setup Utility program menu is not displayed until you type your password.

I hope this helps.

Mike

Jun 01, 2011 | IBM ThinkCentre A51 PC Desktop

3 Answers

How do i rmove a bio password out of my toshiba satellite m305-s 4910 laptop


B I O S P A S S W O R D

Setting the BIOS Password

There are two main varieties of BIOS used in Toshiba notebooks, each with its own unique method for setting and disabling a password. First, determine which type of BIOS is used in your notebook model, as follows:

Starting with the computer fully off, turn it on by pressing and releasing the power button.

Immediately and repeatedly tap the Esc key. If the message "Check System and press the F1 key" appears, then follow the "Esc key BIOS" procedure, below.

If the computer ignores the Esc key when it's powered-on, or if you see an invitation to press the F2 key to enter the BIOS Setup utility, follow the "F2 key BIOS" procedure, below.

Almost all Toshiba notebook computers will respond to either the Esc key or the F2 key when they're first powered-on. The Toshiba HWSetup program (found in the Windows Control Panel) may also be used for setting and disabling the BIOS password. See the HWSetup procedure, below.

To set a BIOS password, start the BIOS Setup program and enter a new password into the password field, per the detailed instructions below. Once a BIOS password is set, it will be necessary to enter it whenever the computer is started, restarted or reset. Choose a password that you can reliably recall, or make note of it in a secure location. If you forget the BIOS password, only a Toshiba Authorized Service Provider can remove it.

ESC key BIOS Password setting procedure

1. Starting with the computer fully off, turn it on by pressing and releasing the power button. Immediately and repeatedly tap the Esc key, until the message "Check system. Then press (F1) key" appears on the screen.

2. Press the F1 key. The BIOS setup program will appear.

3. Using the arrow keys or the tab key, move to the Password field, and highlight NOT REGISTERED.

4. Press the spacebar, and then enter a new password at the "Password = " prompt. Press the Enter key.

5. Enter the password again when the Setup program prompts for it, and press Enter. The Password field will change to REGISTERED.

6. Press the End key and then the Y key to save changes and exit the BIOS Setup program.

F2 key BIOS Password setting procedure

1. Starting with the computer fully off, turn it on by pressing and releasing the power button. Immediately and repeatedly tap the F2 key.

2. The BIOS setup program should appear. If Windows starts, shut down the computer and try step 1 again.

3. Use the arrow keys to move to the Security tab.

4. Use the arrow keys to select "Set User Password". (This 'User Password' is equivalent to what is otherwise called, in this document, a 'BIOS Password'.)
(It may be necessary to set a supervisor password before setting a user password. A Supervisor Password may be thought of as a backup mechanism -- if a User Password is forgotten, the Supervisor Password will allow access to the computer. The next section describes how to set a Supervisor Password.)

5. Press the F5 or the F6 key to navigate to the Password section. Type in a new password at the "Password = " prompt, and then press the Enter key.

6. Enter the password again when the Setup program prompts for it, and press Enter. The password field will now change to indicate that a password has been entered.

7. Optionally, set the Password on Boot feature to 'Enable'. Otherwise the computer may not prompt for the password at startup.

8. Press the F10 key to save changes and exit the BIOS Setup program.

HWSetup BIOS Password setting procedure (This method works for most notebook models.)

1. In Windows, click Start, then Control Panel (or Start, then Settings, then Control Panel).

2. In Control Panel, click on the icon for HWSetup or Toshiba Hardware Setup.

(If neither of these icons are present, download and install the Toshiba utilities for your model from the Service and Support Website, or use the appropriate BIOS Setup procedure above.)

3. Click on the Password tab.

4. Click to select Registered. Alternately, there may be a choice for User or Supervisor Password. Select one or the other

5. Enter a new password at the "Password = " prompt, and press the Enter key.

6. Enter the password again when the HWSetup program prompts for it, and press Enter. The Password field will now say REGISTERED or SET.

7. Optionally, set the Password on Boot feature to 'Enable'. Otherwise the computer may not prompt for the password at startup.

8. Close the HWSetup program.
_______________________________________________________________________

Removing the BIOS Password

Follow one of the procedures below to remove a BIOS Password. See the section 'Setting the BIOS Password', above, to determine which type of BIOS your computer has. Once the password is removed, the computer will no longer prompt for a password when it's started. Removing the BIOS Password requires you to enter it first. If you cannot recall the BIOS Password, only a Toshiba Authorized Service Provider can remove it.

ESC Key BIOS Password removing procedure

1. Starting with the computer fully off, turn it on by pressing and releasing the power button. Immediately and repeatedly tap the Esc key. The computer will display the "Password = " prompt.

2. Enter the correct password, and press the Enter key. The computer will display "Valid password entered, system is now starting up. Check system. Then press (F1) key"

3. Press the F1 key. The BIOS setup program will appear.

4. Using the arrow keys or the tab key, move to the password field, and highlight REGISTERED.

5. Press the spacebar, enter the correct password, and press the Enter key. The Password field will change to NOT REGISTERED.

F2 Key BIOS Password removing procedure

1. Starting with the computer fully off, turn it on by pressing and releasing the power button. Immediately and repeatedly tap the F2 key. The unit will display the "Password = " prompt.

2. Enter the correct password, press the Enter key. (You may need to press the F2 key after you hit the enter key.)

3. The BIOS setup program will appear.

4. Using the arrow keys, move to the Security tab, and to Set User Password.

5. Press the F5 or the F6 key to navigate to the Password section. Enter the current password at the Old Password prompt, and press Enter. At the New Password prompt, press Enter (without typing anything into the password field). At the Confirm Password prompt, press Enter again (without typing anything into the password field). The password should now be removed.

6. Press F10 to save and exit from the BIOS Setup program.

HWsetup BIOS Password removing procedure (This method works for most notebook models.)

1. In Windows, click Start, then Control Panel (or Start, then Settings, then Control Panel).

2. In Control Panel, click on the icon for HWSetup or Toshiba Hardware Setup.

(If neither of these icons are present, download and install the Toshiba utilities for your model from the Service and Support Website, or use the appropriate BIOS Setup procedure above.)

3. Click on the Password tab.

4. Click to select Registered. Alternately, there may be a choice for User or Supervisor Password. Select one or the other.

5. Enter the current password at the "Password = " prompt, press the Enter key. If the HWSetup app prompts for the current password and then twice for the new password, simply press the enter key three times after entering the current password. By pressing the Enter key only, you are selecting no password.

6. HWSetup should now show that the password is Unregistered, which means there is no password set.

7. Close the HWSetup program.


Trus this is helpful. Please vote. :)

Dec 12, 2010 | YouTube Videos

1 Answer

My computer used to when turned off or rebooted would go into the password window, now it does not yet the settings for the password are there. What can I do to get it back I have done a system...but did...


Hello,

when the machine is booted then please right click on my computer and go in manage option and it will open computer management.

Please right click on your user name and click reset password and assign a password.
Before logging in now your system will be asking the password.

If you are talking about the password immediately after turning on the machine then you will have to reset the password in bios under security.
You will need administrator rights for resetting windows password.

Thanks

Apr 07, 2010 | Dell Dimension 2400 PC Desktop

2 Answers

I turn on my compaq presario c300 and it immediately take me to an enter power-on password screen


Hello,
A password on boot is not set by default. The owner activates this option. If some prankster or michief maker has entered a password on boot on your computer without your knowing it, there is nothing you can do, save taking the machine to an HP Certified Service Center to have the password removed or reset.
As the password on boot is a deterrent against computer thefts, you might be asked to show proof of ownership. This certainly is the case with Toshiba laptops.

Hope it helps.

Aug 30, 2009 | HP 435768-001 - Compaq Presario C300...

1 Answer

Cannot get past a user name, password window


Take a paper-clip, and straighten it.
Turn the router off.
Look at the back of the router.
Insert the paper-clip into the small hole, and count to ten.
Turn the router on.
It will now be set to the "factory" settings,
with the "default" ID & password.
Connect to the router's web-interface, and configure the router.

May 31, 2009 | Belkin Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

633 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...