Question about Lands Phones

1 Answer

Program "Do not disturb" on business phone

We would like to set ''do not disturb feature''. We have a Lucent Partner 34-D

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lands Phones Master
  • 2,460 Answers

It's pretty straightforward. You pick a spare button, dial FEAT 00 press the blank button (with a light) and press FEAT 01. There are considerations that I'll reproduce here.

Do Not Disturb (F01) 8
Use this feature to be able to press a programmed button to prevent incoming calls for the
extension from ringing (lights still flash). When Do Not Disturb is on, outside callers hear ringing
while inside callers hear a busy signal. You should use Do Not Disturb only if someone answers
outside calls for your extension when you do not answer them.
Considerations 8
Do Not Disturb is available only on system telephones.
Do Not Disturb requires a button with lights. When the Do Not Disturb feature is on, the light
is also on, indicating that the telephone will not ring.
■ Use Do Not Disturb when you do not want the auto attendant or the voice messaging system
to transfer calls to you.
■ Use Do Not Disturb if you are assigned to a Hunt Group and you leave your desk, so calls to
the Hunt Group will skip your extension and ring immediately at the next available extension
in the group.
■ To avoid missing calls when Do Not Disturb is not needed, turn it off.
■ If Do Not Disturb is active at a doorphone alert extension, the person at the doorphone hears
signaling, but the alert extension is not signaled.
■ Unanswered calls that are transferred from an extension with Do Not Disturb active ring at
that extension if they transfer return.
■ Extensions with Do Not Disturb activated do not receive Caller ID information, unless the call
is answered.
■ Users with Automatic VMS Cover Assigned or with VMS Cover turned on can activate Do
Not Disturb
to Send All Calls immediately to their voice mailbox.
■ Users with Call Coverage turned on can activate Do Not Disturb to Send All Calls
immediately to the covering extension.
■ You cannot use Call Screening (F25) when Do Not Disturb is turned on.

Carl

Posted on May 11, 2010

  • Carl Navarro
    Carl Navarro May 11, 2010

    P.S. Just in case it's not obvious, you press the button to turn it on and again to turn it off. It will be lit when it's set.



×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

cnavarro
  • 2460 Answers

SOURCE: Program "Do not disturb" on business phone

From the manual: You need to program a button with FEATURE 01.


Do Not Disturb is available only on system telephones.
¦
Do Not Disturb requires a button with lights. When the Do Not Disturb feature is on, the light
is also on, indicating that the telephone will not ring.
¦ Use Do Not Disturb when you do not want the auto attendant or the voice messaging system
to transfer calls to you.
¦ Use Do Not Disturb if you are assigned to a Hunt Group and you leave your desk, so calls to
the Hunt Group will skip your extension and ring immediately at the next available extension
in the group.
¦ To avoid missing calls when Do Not Disturb is not needed, turn it off

Carl
.

Posted on Mar 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to make one of our lucent phones ring. It was set not to ring at this extention, but now we need to hear the phone and I cant find my instructions.


If the do not disturb feature is in use, try pressing Feature 0 1 (this requires a button with lights). If you were automatically forwarding calls from this extension, press Feature 1 1 then dial the extension number twice.

If you need to increase the ringer volume, then press + or up arrow when the phone is idle or ringing and the handset is in the cradle.

The manual for some Avaya phones are available here: http://support.avaya.com/css/Products Look under P for the Partner series manuals.

I hope this helps.

Cindy Wells

Feb 14, 2011 | Avaya Lucent Partner 616 Phone

1 Answer

How do I set a programmable button to a specific extension on my Partner Mail VS phone?


1. At that phone, press FEATURE 00 to get into programming

2. press the button you want to program,
4. then press the LEFT intercom button.
5. Then enter the 2 digit extension number.

If you have more buttons, repeat from step 2.
If done, press FEATURE 00 to exit programming.

Jan 14, 2011 | Avaya Lucent Partner 616 Phone

1 Answer

Lucent Partner phone speed dial


At ext 10 or 11, press feature 00
then feature and 600 or whatever code you want
then enter the number as you would dial it.
when done, enter feature 00 to get out of programming.

May 10, 2010 | Avaya Lucent Partner 616 Phone

1 Answer

Program "Do not disturb" on business phone


From the manual: You need to program a button with FEATURE 01.


Do Not Disturb is available only on system telephones.
¦
Do Not Disturb requires a button with lights. When the Do Not Disturb feature is on, the light
is also on, indicating that the telephone will not ring.
¦ Use Do Not Disturb when you do not want the auto attendant or the voice messaging system
to transfer calls to you.
¦ Use Do Not Disturb if you are assigned to a Hunt Group and you leave your desk, so calls to
the Hunt Group will skip your extension and ring immediately at the next available extension
in the group.
¦ To avoid missing calls when Do Not Disturb is not needed, turn it off

Carl
.

Mar 16, 2010 | Lands Phones

1 Answer

How do i get my lucent partner 18d to show caller id name & number


2 line caller id is offered on newer versions of software. On earlier versions a call id name button is used to toggle between the clid name and number.
To program a button on your set press feature 00, press a button you wish to program as clid name,
and press feature 16, press feature 00 to exit programming. Press the button to toggle from clid number to clid name

Nov 03, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

I have a Lucent (Avaya) Partner 18 phone system. One extension will not ring when there is an incoming call. I have set the extension to immediate ring but it still does not work. Any other ideas to try?


see if the DND or do not disturb is on. It should be a lit button programmed on the set, if its not programmed press feature 00, press a blank button and press feature 01

Sep 11, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

Lucent Avaya Partner System Lost access to Voicemail


Obviously you lost your programming. Question is whether the unit is operational. Best thing to do is contact your local Avaya Business Partner for a repair.
If you tell me your location, I can recommend one.

Apr 01, 2009 | AT&T Lucent Merlin SP 34 Phone

1 Answer

Lucent Caller ID


It depends on the version of partner ACS/ partner plus you have.If your version is after 4.0 it should do a two line caller ID. 3.0 and before you can program a button to toggle from number to name. thats done by pressing the feature key followed by 00, pressing the button you wish to program as clid name and entering feature 16, press feature 00 when finished.
hope that helps

Mar 17, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

Do not know how to look through the caller id


You have to have a few programs already set. In admin programming, you will need to set #316, #317 and #318. Then you need to program a log button on the phone, which is Feature 23.

When you hit the log button, you then will see the options to scroll through the calls.

Dec 15, 2008 | Avaya Lucent Partner 616 Phone

1 Answer

Lucent Partner-18 business phone


Feature 00
LEFT Intercom twice
#209
enter the line number (01, 02, 03, 04, etc)
Press the Keypad for the ring style you want (1-8)

Feature 00 when done.

If this does not work, your release of Partner system is too old....

Jun 18, 2008 | Lucent PARTNER18 Corded Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

1,088 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...