Question about Washing Machines

1 Answer

Getting error code e:02 on siemens front load washing machine shortly into wash cycle....stops running.

Posted by on

  • 5 more comments 
  • lagrilla226 May 02, 2008

    Washer is giving e:02 code and stops washing, what is wrong with it?

  • Nils kaborat Jan 08, 2010

    Plz help. We have the same error code E 02. Model SN46M281SK/14

  •  Lee James
    Lee James Jun 21, 2012

    i have the same issue and its a SI 12.14

  • Anonymous Mar 22, 2014

    F45 keeps flashing on my Siemens washing machine and it wont work

  • Anonymous Mar 22, 2014

    washing machine siemens e16.46

  • Anonymous Mar 22, 2014

    washing machine siemens e16.46

  • Anonymous Mar 26, 2014

    did a wash no problems but then nr0 came up and now machine will not start.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 185 Answers

Model number please

Posted on Mar 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GLTF2940ES3 - Frigidaire Front load washing machine e59 error code


http://www.ehow.com/info_12127418_frigidaire-gltf2940fs1-not-spin-error-e59.html

May 02, 2014 | Frigidaire GLTF2940ES Front Load Washer

2 Answers

If you get the FL how do you get the door to open??


  1. Your Maytag Neptune washing machine displays error codes, also called "help codes," to identify specific problems with your washer. Once you close your Maytag Neptune's door, the machine locks the door, goes through the selected wash cycles and unlocks the door when the laundry is finished. Error codes appear when there are problems with the door, the inflow and drainage of water and the motor.
  2. Do
  3. Your Maytag Neptune washer displays the "do" help code when the washing machine is trying to start a cycle, but the door is open or not locked properly. If this message is displayed, close the door securely and restart the washing cycle.
  4. FL
  5. The "FL" code indicates that the washing machine was unable to lock the door after you closed it. Open and close the door tightly, then restart the washing cycle.
  6. Sd
  7. The "Sd" code indicates that you have added too much detergent to the washing machine and your laundry has too many suds. The machine will stop displaying this code if it has successfully run the suds recovery cycle, which removes the excess suds from the wash load. If the code remains, reduce the amount of detergent in the load. Use less detergent for similar loads of laundry in the future.
  8. PF
  9. The "PF" code indicates that a power failure has occurred. Restart the wash cycle. If the code still appears, check that the washing machine is still plugged in to the electrical outlet.
  10. Nd
  11. The "nd" code indicates that your Maytag Neptune is not draining as it should. Check that the drain hose isn't kinked and that the stand pipe isn't clogged. If you find either of these problems, fix them before restarting the washing cycle.
  12. LO
  13. The "LO" code appears when the washing machine has finished the selected wash cycle, but cannot unlock the door. Verify that the door is closed properly, push the "Off" button, and wait two minutes. The door should unlock and the error code will disappear. If the error code remains, unplug the washing machine, wait two minutes and plug it back into the electrical outlet.
  14. Lr
  15. The "Lr" code indicates that the washing machine's motor is not running as it should. Have your Maytag Neptune washing machine serviced by a certified Maytag repair professional.

Dec 06, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

MY WASHING MACHINE STARTS A WASH CYCLE THEN SUDDENLY STOP AND STARTS FLASHING F-02 WHAT DOES THIS MEAN?


Hi.
Error code F02 is a problem related to the motor.
It means that the motor is jammed, or tachco detached.
Check connections on motor and module, and motor plug.
Please rate my solution.
Thanks.

Nov 12, 2009 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Siemens stops without going into the spin cycle


when it stops is there and f:XX error code on the display? were XX is a number.

Jul 18, 2009 | Siemens WM14S794GB Front Load Washer

2 Answers

Siemens WFXD5201UC Front Load Washer won't complete cycle.


I am having the same problem with my washer. Did you ever get it fixed??

Mar 23, 2009 | Siemens WFXD5200UC Front Load Washer

1 Answer

Washer stops during middle of cycle and post 02 F


f 02 is the error code for taking too long to drain the water disconnect power remove 3 torex 20 screws from lower front panel revove cap from pump asm to check for any obstructions beware there will be water in the pump

Dec 15, 2008 | Whirlpool GHW9100L Front Load Washer

2 Answers

Siemens XLP 1400 stops with F12


The manual says that it means there's water in the base pan because the apliance is leaking and you should callCustomer Service.

I cleaned the filter and then put the machine onto its Empty cycle. After that it worked.

Oct 19, 2008 | Siemens WXLP1460 Front Load

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...