Question about Omega Paslode 901000 Impulse Cordless Finish Nailer

4 Answers

Paslode finishing nail gun won't fire? Battery is fully charged and gas cannister is full. The gun is making all the correct noises that occur when firing nails, however, it doesn't fire nails.

Posted by on

  • bubba Jun 06, 2013

    fuel can may be too old, don't trust date on can....

×

Ad

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 67 Answers

Give it a thorough cleaning.. if it still does not fire you might have to replace the spark plug.

Posted on Sep 13, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Omega Master
  • 1,824 Answers

Little Suggestion Internal there can be a problem in the upperpart circuit thats been mechanically actuated by the safety bracket that is pushing on a microswitch that bracket on the nailers front can be a little bent.

Posted on Jul 29, 2016

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Check to make sure the driver is returning to the start position. If it isn't then remove the battery and push it back with a small flat ***** driver until it stops. Fire it again and check to see if the driver is in or out. If it is out, then the exhaust and piston ring needs to be replaced.

Posted on Apr 14, 2016

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Check gas expiration date or could be bad gas

Posted on Dec 08, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a cordless paslode impulse finish nailer is missfiring. the battery is fully charged, the gas chamber is full.


Hi there,

Has the tool been striped down and cleaned lately? And are you using genuine paslode gas? If not, do these two fixes first and try again.

Sep 19, 2014 | Omega Paslode 901000 Impulse Cordless...

1 Answer

Looking for the nearest repair shop for paslode nail gun in Northren Va


Have all the nails been cleared out of the tool where they were jammed? If not take the fuel cell out of the tool, and remove the battery before working on it. If still persists come back to this website for further help.

Sep 19, 2014 | Omega Paslode 901000 Impulse Cordless...

1 Answer

Paslode IM350 90CT Nail Gun gun light green gas full battery charged fan works gun wont fire


Try a different gas cartridge and make sure the top of the cartridge is snapped tightly onto the cartridge body.

Jun 23, 2011 | Air Tools & Compressors

1 Answer

Paslode impulse finishing gun wont fire. battery fully charged and gas is full.


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



,.//,

Jan 01, 2011 | Omega Paslode 901000 Impulse Cordless...

1 Answer

I changed the gas cylinder in my paslode framing nailer and now it won't fire the nails at all. The battery is fully charged and the whirring sound and smell of gas is evidenced but no nails are fired.


Make sure you have the correct gas cylinder. There are more than one type of cylinders for these nailers. If it is not correct it won't seat and gas will leak. Whiring sound is normal, fan mixing oxygen. Make sure "O" ring is in place under the gas cylinder.

Oct 01, 2010 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Paslode nail guns won't shoot


piston is probably jammed

This happens sometimes try holding it up against a board with the trigger depressed and then inset the battery.

The goal is to try to force the firing sequence to get the piston back to the right position with corded units this is simply done by attaching the air hose with the trigger pulled this causes air to rush into the gun chamber pushing the piston back and firing a nail out.

The cause of this is a misfire or jammed nail that stopped the piston in the wrong location so air will not build in the chamber correctly.

Hope that helps

Feb 18, 2010 | RTO Paslode 902000 IM250 Ii Cordless 16...

1 Answer

Paslode nail gun 325 black not firing


Any time these guns become intermittent or stop firing but the fan still runs, the first the to check is the expiration date on the gas cartridges. The do expire and this will make the gun work inconsistently or not at all.

Dec 08, 2009 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

My finish nail guns, 16 ga won't fire.


There is a little plastic piece inside above the trigger...usually this breaks. It touches a microswitch when the cylinder is closed all the way, allowing the nail to fire.

Oct 04, 2009 | RTO PasLode 900420 Impulse Framing Nailer

4 Answers

Paslode 350 wont fire


Hi,
Probably needs cleaning. You`ll need two new o`rings.

Aug 19, 2009 | RTO PasLode 900420 Impulse Framing Nailer

Not finding what you are looking for?
Omega Paslode 901000 Impulse Cordless Finish Nailer Logo

3,672 people viewed this question

Ask a Question

Usually answered in minutes!

Top Omega Tools & Hardware - Others Experts

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

1824 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Michael Van Der...
Michael Van Der...

Level 2 Expert

66 Answers

Are you an Omega Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...