Question about Washing Machines

1 Answer

We have a SIWAMAT XB 861 purchased in Dubai in 2004. It has had very little useage since it was not required for atleast 4 years during the intervining period. The electrical circuit board has burned and we need a replacement. How and where do we get one.

Posted by on

  • seward_bob May 10, 2010

    Enr No WXB861ME/06

    Fd No 8405

    There are numbers every where but thats the last place I thought to look.

  • seward_bob May 11, 2010

    Many thanks for your help. Seems the cost of the part by far exceeds the cost of the machine.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 269 Answers

Hello,
Firstly I would need more information on the model number,which can normally be found inside the door on the edge of the door.If you can get the full ( Enr. number.). And the (Fd. number).Then we should be able to track one down.
Hope I was of some help.

Posted on May 10, 2010

  • Christopher Dowling May 10, 2010

    Hello,



    I have found the part no. from Bosch/Siemens.It is 493686. Cost of item €211.41 ( about $270 ).This does not include delivery.I have exhausted my other searches with all my other contacts.Please be aware that the reason for the module to burn out could point to another part in the machine failing.



    Hope this was of some help.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install a yaw sencer on 2004 scion xb


yaw rate sensors require calibration. I wouldn't advise you do this yourself.

Feb 26, 2017 | 2004 Scion xB

2 Answers

Remote starter only allows my starter to turn over twice; needs at least 3 with my key. How to adjust to have it starter run longer on remote?


I know you are looking to have the remote starter run a third time but I would say you need to look at your Fuel Pressure Regulator on the Scion. Sounds like it is not holding fuel pressure at the fuel rail and that is why it requires a third Crank

Jan 05, 2016 | 2006 Scion xB

1 Answer

Siwamat xb 1060


Could be the transformer inside the machine..

Mar 31, 2014 | Siemens Washing Machines

2 Answers

Fireing order for a 2004 scion xb


For most 4 cylinders it's 1-2-3-4 but there are a rare few with 1-3-2-4. These are very rare. I don't have a book on your particular vehicle so I can't confirm it one way or the others.

Oct 25, 2011 | 2004 Scion xB

2 Answers

I have a broken door catch for a Siemens Siwamat XB 1061. Can I get a replacement part


I feel for you because we have exactly the same problem : our door broke, the handle in fact. Everything else works wonder but the screw driver trick is bound to give in one day eventually and we'll be left with no washing machine at all. Has anyone found any infor on the door anywhere? thanks guys

Mar 19, 2011 | Siemens Washing Machines

1 Answer

Model DU8700-xb purchased 1995 When unit reaches


Please check your overflow float. It may be stuck in the down position. It looks like a little hat or cone in the bottom of the machine. It should move freely up and down. If it is stuck in the down position, your machine may over fill with water and cause your leak. Good luck

Jan 23, 2010 | Dishwashers

1 Answer

My compressor cycles and purges in hot weather. After a while of these cycles, it overheats and shuts down completely. Then only hot air comes out & it smells like a swamp. after it cools down it wroks...


It looks like there is a technical service bulletin available you might want to check out. It is TSB No. AC002–04 it states In high ambient temperature areas, some 2004 – 2005 model year Scion xB owners may
feel that the A/C system does not blow cold enough air. This procedure provides a
method to improve this condition. Bring it in to a dealership and see what they say. I hope this helps you.

Jul 06, 2009 | 2005 Scion xB

1 Answer

Support


pentium 2? the minimum required for xp is around 233mhz. I would recommend atleast 500 mhz for faster useage. and more than 128mb ram.

Jun 06, 2008 | Intel Pentium II slot 1 233Mhz...

2 Answers

Cooling light stays on


If you are referring to the blue temp light on the dash, it stays on until the engine has reached operating temperature. This lets you know the heat will be ineffective and the engine will not be running at peak efficiency during this time.

May 15, 2008 | 2004 Scion xB

1 Answer

Indesit washing machine model WM 110 6kg


There are shops in Dubai which could help you. And lots of Philipinos in Dubai - they could surely help.(!) Wil try to get you an email of a shop.

Jun 14, 2007 | Indesit WA 115 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...