Question about JVC AV-56WP30 56" Rear Projection Television

2 Answers

Stk392-110 v stk392-180

Great post for the convergence repair. awesome links. I have no doubt that I can replace these and fix my ac56wp30. However, which ones should I use? I can pick up the 180's for $10 or 110's for $6 or I can pay $90 for the JVC direct replacement 110's. What's your recommendation?

Posted by on

  • 321fire Apr 23, 2008

    flawless repair, thank you both for the info. I did go with the 150's because it seemed like perfectly good reasoning to me. On to the next one, a mitsubishi ws55613



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Contributor
  • 58 Answers

Actually I would go and have gone with many times, the STK392-150's They handle more wattage than the original 110's but don't draw as much current as the 180's, which is good for the surronding resistors. It is a good balance and has worked for me many times. Hope this helps.

Posted on Apr 02, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

150 or 180 work for me

Posted on Apr 08, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Convergance is crooked

Depends on the brand of TV. Is the convergence off by inches or just barely? Please clarify.

Jul 02, 2009 | Panasonic Televison & Video

1 Answer

Red convergence

you can get the complete convergence repair kit for your model at the following link which includes both convergence ICs and all the convergence resistors with instalation instructions with pictures, its actually a very easy repair takes about an hour from start to finish. Heres the link

Jul 26, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Screen 3 different colors

You will need to replace the convergence amp Ics. Please respond to this same post with the model number of your set and I will post the correct numbers for your ICs and also a link where you can get replacements with free instructions.

Jul 05, 2008 | Televison & Video

1 Answer

Toshiba 50HX81

Yes the convergence ICs need replacing. I am not sure if your board is still available, however you may want to check the following link, they offer a service where they replace the ICs and convergence resistors often for less than most shops come out and diagnose for. Heres the link leave them an email with your model number and they will let you know the cost for repairing yours or wether a new board is available.

Jun 09, 2008 | Toshiba 50HX81 50" Rear Projection...

1 Answer

Convergence problems with Samsung PCN5425R.

that model has a convergence board, how ever it may not be the conversgence board as the convergence ICs are not on the Convergence board itself, and usually thats what goes wrong are the actual ICs. However this is an easy repair the parts are inexpensive and I can post a link where you can get new ICs and they provide step by step instructions with pictures so you can do the repair your self. Let me know if you would like the link.

Mar 30, 2008 | Samsung PCN5425R 54" Rear Projection...

7 Answers

The red convergence is off

replace the convergence ICs post your model and I will post a link where you can get the parts and they include step by step instructions with pictures so you can do the repair yourself takes an hour and will save you about a 400 dollar repair bill.

Mar 30, 2008 | Sony KP-46WT510 46" Rear Projection HDTV

3 Answers

Location of convergence IC's in R52WM24

i have the same problem where is the fusible link i replace 2 boards and a connector (t.v. repair man can and diagnoised the problem but did not fix it)

Feb 02, 2008 | RCA R52WM24 52" HDTV Projection Television

2 Answers

Convergence problem on rear projection Panasonic PT53WX42?

Chris Palmer gives detailed instruction on how to replace the convergence IC's. Go to his blog at:

May 29, 2007 | Panasonic PT-53WX42 53" Rear Projection...

Not finding what you are looking for?
JVC AV-56WP30 56" Rear Projection Television Logo

Related Topics:

451 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74887 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides