Question about Tomtom ONE GPS Receiver

1 Answer

Device comes on but screen is blank...will not load menu

The green light is on indicating power to the device but nothing more than a blank screen

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 69 Answers

There is a small reset button on the bottom disconect the power hold in the rest button on the bottom of the unit and power it up this will reset it to the factory default

Posted on May 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a sony KDL 46xBR2 when I turn on powers up green light stays on but a dark gray screen no picture or sound


The green light merely indicates that power is getting to your TV. The symptoms you describe point to internal power supply failure

Mar 17, 2013 | Sony BRAVIA KDL-52W3000 52 in. LCD...

1 Answer

Sanyo dp42848 turns on but blank screen


Replace the Main board if your not hearing any audio from the set.

Oct 27, 2012 | Sanyo DP42848 LCD TV

1 Answer

Turn tv on. green light solid display, no picture or sound


The flashing green light is likely indicative of a self-test failure, indicating the TV has detected some sort of internal fault. With no picture or sound, one strong suspect is the power supply. Flat-panel TV's have an internal DC power supply that converts the inbound AC current, and when these fail, or are unable to supply a minimum level of power to the set, it can behave as you describe, providing only enough power for the green light to illuminate.

Jul 28, 2012 | LG 50PG60UD 50 in. HD-Ready Plasma TV

4 Answers

DS lite green light comes on, top screen flash,then switches off


Check L2 near the power switch on your DS mobo. That part usually get loosen or taken out when you drop your DS. And usually you can recover it when dismantling your DS.

Jun 16, 2009 | Nintendo DS Lite Console

1 Answer

Vizio P50HDM No Picture/No Sound


this is most likely the sustainer board(s) problem. Replacing the sustainer boards should correct this problem for you. you can get the parts at vancebaldwin.com

May 29, 2009 | Vizio P50HDTV10A 50 in. Plasma HDTV

2 Answers

Blackberry pearl 8100 blank screen & green blinking light


Try performing a hard reset: remove the battery from the device while it is still powered on, leave it out for 30 seconds, then reinsert.

Sep 28, 2008 | RIM BlackBerry Pearl 8100

1 Answer

Psp problem


remove the battery from the psp and put back in again as sometimes the power light freezes on, but isnt actually powering the psp.

Sep 07, 2007 | Sony PlayStation Portable (PSP) Console

1 Answer

Blank Screen


Can you see anything at on but dimly? If so thats is the backlight tube If you cannot see anything then it is a major fault eitherway a repair shop job I should think

May 30, 2007 | HP L1902 19" LCD Monitor

1 Answer

Startup problem


try pressing F8 on start up and getting into the safe mode and highlight last known good configuration. If still no luck try this:- Only other solution is to remove right side panel of pc and locate the JBAT1 terminal and move jumper from pins 1-2 to pins 2-3 for a few seconds and back again. Turn on pc and then hopefully you can access the bios to set the time and date and save settings then re start.

Jan 21, 2007 | IBM NetVista M42 PC Desktop

Not finding what you are looking for?
Tomtom ONE GPS Receiver Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

LP

Level 3 Expert

485 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...