Question about JVC AV-48WP30 48" Rear Projection Television

1 Answer

Convergence board what do you mean convergence board needs repair ? has been a on going thing with these tvs?mine has been doing the same thing with a green line and wave.so i changed the ic now it does it with blue.is there a place you can just order whole convergence board ?Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 58 Answers

The convergence board part# is SSB-5051A-M2 and is available from vance baldwin for about $270.00. Hope this helps.

Posted on Apr 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 65 inch Hitachi projection TV and all of a sudden lines apperaed on the screen that runs across the upper part of screen. I tried using the"Magic Focus" setting to get rid of these lines...


The tv Magic Focus button don't solved these R,G,B colors lines mis alignments problems.Mean ur tv have a convergence pictures problems,it is dead.Ur tv now have any colors lines like R,G,B mis alignments,have a colors shadows picture or a 3D pictures look alike?Yes,mean ur tv convergence board it is dead to causes all of these pictures problems.The tv convergence board must have to repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures problems.The tvs shops will cost u like $300-350 for parts and labors.

Sep 24, 2011 | Hitachi 65S500 65" HDTV-Ready Rear...

1 Answer

My Mitsubishi 1080HD model WS-55315 colors are not correct. The blue is good and the green seems to be, everything else seems to be a shade of light brown or tan. I thought maybe the red tube was bad but...


The tv have a problems known as a convergence pictures problems,it is dead.Tv have any colors lines like R,G,B mis alignments,also tv have any colors shaded shadows pictures or a 3D pictures look alike?Yes,than the tv have a convergence board problems and it is dead to causes all of these problems.The tv convergence board must have to repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence pictures problems.The tvs shops repair a DLP tv convergence board will cost u like $300-$350 for parts an labors.

Sep 12, 2011 | Mitsubishi WS-55315 55" Rear Projection...

1 Answer

Magic Focus button will not line up picture. Red and green colors shadow images.


The tv have a problems known as a convergence picture problems it is dead.The tv have any colors lines like R,G,B mis alignments,tv have any colors shadows pictures or 3D pictures look alike?Yes,than the tv convergence board it is dead and the causes of these problems.The tv convergence board must have to repair like replacing like 2 STk covergence ICS and some or all of it resistors too.To fixed the tv convegence board to solved the tv convergence picture problems.The tvs shops will cost u like $300-350 for parts and labors.

Sep 02, 2011 | Hitachi 53SDX01B 53" Rear Projection...

1 Answer

Seems two be out of focus with green and red blurr.


The convergence board is what is bad, the Convergence IC need changed out on the convergence board, or the convergence board itself, and you you can also check for blown fuse on the convergence board. The repairs are going to run around 450 on getting it repaired. The red, green, and blue color are alien through the menu, but if they don't line up, it needs repair.

Jan 21, 2011 | Sony KP-53HS10 TV

2 Answers

My samsung pcl6215r is having problems with the green screen. The red and blue colors are fine but the green wont line up with them and its making it out of focus badly. It doesn't appear to be dim or...


brent hardin,

Your description of the problem sounds like a convergence issue. You more than likely have lost the convergence ICs. They will need to be replaced and the convergence will have to be set. The green beam should not move. It is the standard which the red and green are moved to overlap. Since you have bow at the top and bottom I would replace the convergence ICs. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which explains the problem, how to replace the parts and where to get the replacement parts.

Thanks for using FixYa and for the great rating. Great ratings will keep the experts helping to solve problems. Thank you.

hardrocko

Nov 17, 2010 | Samsung PCL6215R 62" Rear Projection...

1 Answer

Hello, I have a Hitachi 42" RP, model #SP-43H. All of a sudden the color on the screen is distorted and is creating a double immage in Red and blue'ish green. Any advice as to what I need to repair this? ...


Common problems on DLP projection tvs.This problems is known as a convergence problems,it dead.The colors lines R,G,B mis alignment,colors shadows pictures and 3D pictures.The tv convergence board,the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved tv convergence picture problems.The shop,will cost u $300-350 for parts and labors.

Oct 02, 2010 | Hitachi Televison & Video

1 Answer

Hi I have a Toshibe DLP 46HM95 that I have purchased in 2004. I am having a problem with the picture color. It has a pink/purple/green tint and seems like the connection is trying to go out. I replaced the...


This problems,u have is not the projection lamp problems.The problems,u have it known as convergence problems,it dead.The colors lines R,G,B mis alignment,picture have colors shadows,pictures look like a 3D pics.The Toshiba DLP tvs have a board call a HYPER board,that the Toshiba tvs convergence board.The (HYPER-BOARD)the tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the HYPER-BOARD known as a convergence board,must be replaced to solved the tv pictures convergence problems.The shop,will cost u $300-350 for parts and labors.

Sep 29, 2010 | Televison & Video

1 Answer

HCL652W


Your convergence ICs are defective and quite possibly the burning smell was likely some of the convergence Resistors burning. Its actually not that exspensive of a repair. you can get a brand new Sub deflection board for your set for 232.00 at the following link and that will fix your set and you just put the new board in. The site will also provide you with free on line tech support to assist you with installing the new board. you need the P54 Sub deflection board. Its available at the following link.
http://servicemanuals.vstore.ca/

Jun 13, 2008 | Samsung HCL652W 65" Rear Projection...

5 Answers

Distorted picture and multi-color words


ive got the same problem on mine ita a 2001 model and also mine when you turn it on it goes off by itself and wont stay on.also mine has multiple pictures one green and one red almost as if 3d im not sure what it cost to fix it but tvs have come down so much i might just buy a new one. good luck with yours

Aug 12, 2007 | Mitsubishi WS-55809 55" Rear Projection...

4 Answers

Lamp issues


No its a tube and not a bulb. If thew line is green then theres an issue with the red and blue as the green is stationary on most sets unless thers a green centering ? Its a componet on the convergence board thats bad or going bad but if you replace any components on the board most likly your gonna need to do a convergence alighnment I would let a pro handle this repair unless your an experineced repair tech Good Luck

May 21, 2006 | JVC AV-56WP30 56" Rear Projection...

Not finding what you are looking for?
JVC AV-48WP30 48" Rear Projection Television Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72168 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...