Question about Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

The door lock won't lash. How do we replace it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,911 Answers

The followong link explains how to access and replace the door latch on a Kenmore Elite front loader:

http://www.fixya.com/support/r3575840-replacing_a_door_latch


Replacements parts can be purchased from any of the following websites:

searspartrsdirect.com
pcappliancerepair.com
appliancepartspros.com
repairclinic.com

Prices vary between sites, so shop and compare. the first three sites listed also have helpful exploded view parts illustrations to assist you with locating and properly identifying the parts you may need.
If you have any questions, please post back and let me know. I hope this helps you.

Posted on May 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven door won't lock, self clean won't start


this is a door lock error , you will need to replace

Feb 20, 2013 | Kitchen Ranges

1 Answer

Door won't lock


try pushing the door and hold in if this does not work the door catch is faulty replace internal door lock then should work (common fault)

Sep 28, 2012 | Indesit IWC6125 Front Load Washing Machine

1 Answer

Splendid 2000s washer dryer door won't lock


Possible that the door lock is jammed and needs to be replaced.
please check this link;
Replacing door lock

Jun 06, 2012 | Splendide Washing Machines

1 Answer

Machine won't start code dl F


The machine is not starting because the door lock fails to lock the door as what error code FdL stands for. It flashes after the door locking routine fails to lock the door after 6 attempts. Replacing the door lock/switch assembly is the only viable if no problem is seen with the wire harness connecting the assembly to the central control unit. The link below contains the detailed instructions in replacing the door lock/switch assembly.

Replacing the Door Lock/Switch Assembly on Whirlpool Duet and Kenmore Elite Washers

Aug 26, 2011 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

My mother accidentally pulled the door open on the washing machine when it was still locked. Now it won't do anything. It would not even finish the cycle. We were able to get the clothes out and...


Due pulling of the door forcibly the door interlock switch has damaged. So the door cannot lock properly &r the door lock switch is not functioning. Replace the door interlock switch.

Aug 07, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Door won't lock..machine won't start


could be a faulty door lock as this is required to be locked before a signal is sent to the controller to start the wash cycle, try replacing the door lock, there quite cheal only a few pound

May 31, 2011 | Kenmore Washing Machines

2 Answers

The oven door won't close all the way. The "lock" light on the upper left is on. No amount of fiddling has solved this problem and oven is unusable. Help please!


Hi

The door lock assembly is bad and should be replaced, you can try to move it but that won't help and will have to be replaced to solve this issue. Hope this helps...please post back for further assistance.

Daniel

May 26, 2011 | Ovens

1 Answer

2006 chev.colora the door lock on the front right side won`t work


Common for the door lock solenoid to go bad and your going to need to replace it. You may hear it clicking but it's to weak for it to lock and unlock the door.
Thank you for using fixya and good luck

Apr 26, 2010 | 2006 Chevrolet Colorado

Not finding what you are looking for?
Kenmore 3.8 cu. ft. HE3 Front Load Washer Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...