Question about Adesso CyberTablet 6400

1 Answer

Mouse works, pen doesn't

I am trying to use my tablet again after leaving it in a drawer for over a year. The mouse works and the pen doesn't. I've reinstalled the driver. Downloaded and installed the driver from the Adesso site. Restarted the computer. Checked the settings for the pen. Is it possible the pen itself needs to be replaced?

Posted by on

  • MsSonya Mar 28, 2008

    I switched the battery back and forth between the mouse and pen. still no recognition light on the tablet for the pen but the mouse works with either battery. I'm not real computer savvy so I'll need a little more info on what you mean by "configure" the pen. is that the settings tab for pressure etc?

  • MsSonya Apr 05, 2008

    I put a new battery in the pen as a last ditch effort before replacing it and wallah! it works! I guess it needed more power than the mouse does. huh. thanks for your help.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 329 Answers

Before you replace the pen. i'll suggest to check it again twice. check if theres a battery or some possible device to configure it befoire you replace the pen. thanks

Posted on Mar 28, 2008

  • Reginald Villodres
    Reginald Villodres Mar 28, 2008

    is there any driver of the mouse and pen? if you have a driver software of your mouse or pen, try to uninstall the previews installation then install it again.. and if doesnt work again.. you need to replace it. thanks

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I'm using Photoshop CS4 with my Wacom Bamboo Fun tablet, the screen tracking for the tablet only works for half the tablet. This happens with everything else as well, not just Photoshop...


Go to Control Panel, and open bamboo properties. There you select the "pen" tab. In the pen tab you will see tracking. Select pen mode and details. You can map the pad there. After mapping pen mode try it in mouse mode as well. Best of luck!

May 28, 2011 | Wacom Bamboo Fun USB Tablet with Cordless...

1 Answer

My Genius Mousepen 8x6 tablet isn't working with the pen. If the pen touches the tablet, the light lights up, but the cursor doesn't click and it won't move either. The mouse is working fine, though.


My i608 pen stopped working today. I've had it for a month. The mouse was working fine, but the pen wouldn't work at all. Then I left the mouse on the pad and used the pen while the mouse was on the pad, and the pen started working again. Now it works even without the mouse on the pad. Did it re-establish the radio connection or something by doing that? Anyway, saved me the $25 replacement cost.

Nov 25, 2010 | Genius MousePen 8x6 (MOUSEPEN8X6)

1 Answer

The mouse does not work, but the Pen does.


Re-install ur tablet and take the battery out of the mouse while installing, Get a new battery, and then try it again.

Mar 30, 2010 | Adesso (CYBERTABLET6400) Graphic Tablet

2 Answers

My Bamboo Fun Tablet pen/stylus is not working. The tablet registers that the pen is there, the light turns orange, but the mouse will not move, for either the pen or eraser side. It will move for my...


That happened to me yesterday. What I did was I went to the wacom site here: http://www.wacom.com/downloads/drivers.php, selected my tablet make and operating system, and downloaded the driver update. I installed it and as soon as it was done my pen started working again. Hopefully this works for you too!

Mar 02, 2010 | Wacom Bamboo Fun 8.5" x 5.3" USB Tablet...

4 Answers

My Tablet pen wont release, it acts like im clicking and holding


I'm just gonna pass on a email from Tech Support I recieved. 

"It sounds as though your pen has pressure in proximity. This is present when the tip sensor of your pen is stuck down causing the pen to think that it’s clicking before it’s even touching anything. What you may want to try would be to remove the nib from the tip end of the pen, it pulls straight out with a pair or tweezers or your teeth, and leave that out overnight with the pen left on its side. Place the nib back in the morning and if the issue persists then you may have a defective pen tip."

The rest consists of personal info and warranty advice so I'll leave it there. 

Sep 07, 2009 | Wacom (PTZ930AC) Graphic Tablet

1 Answer

Point pen fails after falls


I'm guessing something inside the pen was jarred. A basic solution would be to get a replacement.

Also try taking the tip out of the pen and leaving it OUT of the pen for 24hrs.

~Mitchell

Apr 20, 2009 | Wacom Bamboo Fun 5.8" x 3.7" USB Tablet...

2 Answers

Genius 8x6 tablet pen freezes


Try putting a new battery in it. Mine was having the same sort of problems, and they were pretty much entirely fixed by a new battery.

Apr 05, 2009 | Genius MousePen 8x6 (MOUSEPEN8X6)

1 Answer

Wacom tablet won't recognize pen


Hmm. I've had a similar thing happen with my tablet. Have you tried removing the tablet pen from the list of tools in tablet preferences and then adding it to the list again before checking the 'About' section of the tablet pen set-up and clicking the 'diagnose' button there in? As that worked for me when my tablet pen was not working. The pen was recognized by the tablet after that. 

Aug 20, 2008 | Wacom Intuos3 Graphic Tablet

4 Answers

Wacom tablet stopped working, blue light on.


Hey I had this problem too with my Bamboo too, I'm not sure if it was anything I changed or whatever but either way the blue light was on but it wasn't registering the pen.

I found a way just minutes ago to fix it however!

Go into 'start', 'all programs', then look for 'pen tablet'. Hopefully you should have this. If not then download the latest driver for your tablet from the wacom website and that should install it.

Next choose 'pen tablet preference file utilty'. Then under 'my preferences' choose to remove. Bingo! All was well in the world again.

This worked for me so hopefully it will for some of you guys too! Good luck!

Jan 15, 2008 | Wacom (PTZ930AC) Graphic Tablet

1 Answer

Tablet Pen not working


I have a G-Pen 340 which i just bought and the pen isn't being registered on the computer. The green light isnt even flashing :( I dont know whats wrong with it.

Jul 27, 2007 | Genius G-Pen 4500, 4x 5.5 4x 5.5 tablet...

Not finding what you are looking for?
Adesso CyberTablet 6400 Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Adesso Graphics Tablets Experts

ray gallant

Level 3 Expert

36117 Answers

Julie Clark

Level 2 Expert

266 Answers

Dougie

Level 2 Expert

58 Answers

Are you an Adesso Graphics Tablet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...