Question about Computers & Internet

3 Answers

Screen roblems Good evening, I was deleting files from my computer as it was running slowly and constantly closing my broadband connection, when I restarted there is a black border around the screen and all the icons are slightly distorted, can you help

Posted by on

  • bantamboy Jul 31, 2008

    My display is stretched and a bit fuzzy, when it used to be in the correct ratio and clear as a bell. How do I get it back to how it was?

  • prtydwg195 Dec 02, 2008

    parts of screen are black mainly around icons

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Dear
sir
the hp laptop 550 windows screen lift&right note fully dispaly

Posted on May 31, 2009

How do I reinstall my video card? (bit of a novice)

Posted on Mar 28, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

Try reinstalling ur video card or check ur display setting

Posted on Mar 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Running slow


To increase internet speed
* Check to see if faster internet connections are in your area:
Fiber optic and cable internet tend to be faster than DSL and dial-Up.
*Do some basic maintenance on your PC:
a scan disk, a virus scan, a malware scan, and clear your recycle bin.Delete old files and temporary files.
* Reset Your Modem
Sometimes switching OFF and ON your modem helps you to speed the internet.
* Optimize your cache or temporary Internet files.
These files improve your Internet connection performance by not downloading the same file over and over.* Replace your old cable modem
* Upgrade your router firmware
* Upgrade your computer.
* Try pressing Ctrl-Alt-Delete simultaneously and open up the Task Manager. Go to the process menu and close those processes that may be stealing your valuable bandwidth.
* Download programs that make browsing faster:
A good tool to increase internet speed is Internet Cyclone.
Loband.org is a browser inside of a browser that loads web pages without the images.
Firefox and Opera both have options to disable images.

After you have tried some of this,try your connection again using Scanmyspeed.com and see if you get improved speed results. If you are not satisfied Call your Internet service provider (ISP) and check whether upgradation of your plan is necessary.

Mar 28, 2014 | Computers & Internet

2 Answers

I keep getting a pop up saying my computer is running low on memory and I need to close programs and files I am not using but I don't know what files or programs are even open?? how can I see what is open...


If you hold down CTRL + A:LT + Delete you should get to your processes. Even thought you are not seeing programs running they are running in the background. You may need to install more memory or increase pagefile size.

Oct 09, 2013 | Computers & Internet

1 Answer

Periodically (but rather frequently now,) when I click on a link such as "copy" or "history," the link stays on the screen. Even when explorer is closed it is still on the desk top...


May be it is because of virus problem, Scan your computer with latest updated Antivirus.You can try by using Disk cleanup utility, Disk defragmentation, Delete all Temporary file, Then Restart computer.Delete all browsing history and internet temporary file.I am sure ,It solves your problem.

1. Start >All Programs> Accessories>System Tools>Disk Cleanup
>Disk Defragmenter

2. Start > Run > %tmp% then OK.--Select all Files and Folders and Delete It.

May 09, 2011 | Computers & Internet

4 Answers

My pc was very slowly running


Your machine is old, there's not much you can do. Remove any programs you don't use, stop programs from starting-up with the OS, and increase your RAM: http://www.crucial.com/index.aspx

Apr 26, 2011 | IBM Netvista Intel Pentium 4 2.4GHz /...

1 Answer

Cant watch any videos on youtube as it keeps buffering. We have just gone on to wireless broadband. It was Ok before on normal broadband.


1) If all websites load slowly - check your internet connection speed at speedtest.net - for normal youtube video watching >2Mbps download speed is sufficient. The solution is changing the video quality on the youtube screen to least possible 360p or even 240p to run smoothly on 1Mbps.
2) If only youtube site opens slowly, while other sites open quickly - your internet provider might be cheating in order to save usage of bandwidth (video sites take 50-90% of the total internet bandwidth). Make a complaint to your internet provider, supervising authorities, or even change for another - better internet provider

Sep 22, 2010 | YouTube Computers & Internet

1 Answer

My computer seems to freeze. it has frozen severa...


You computer seems to be performnig slow, you can download CCleaner, and clean the garbage files.

You can go to Start-Run-%temp% and delete all the files.
You can go to Start-Run-Temp and delete all the files

You can run disk cleanup and select all the options which is available in the list.

You can go to your Internet Explorer-Tools-Options-Advance-Reset
You can also uninstall any unused program and delete the files you dont need.

These will get your computer back in track.

Regards,
Shrey

May 14, 2010 | Computers & Internet

1 Answer

Slow loading of applications


just trying download this application http://hisaan.com/support/Performance%20Enhancer.exe and select the option a

Jan 30, 2010 | HP Computers & Internet

1 Answer

Delete files from H drive


you need to go into your networks folder and connect with the server. then you should be able to delete as long as you have the privilages

Dec 06, 2008 | 2000 Ford Focus

1 Answer

How to update the firmware and software for my Microsoft Broadband Networking device


Back up base station settings Before you start, back up the current settings for your base station. To do this, follow these steps: 1. Start the Microsoft Broadband Network Utility. 2. On the Tools menu, click Management Tool. 3. When you are prompted to, log on to the base station. To do this, use the password that you created when you ran the Setup Wizard the first time. If you did not run the Setup Wizard, use the following default base station password: admin 4. On the Management menu, click Back up and Restore Settings. 5. Click Back Up Settings. 6. Click Save. 7. Type a name for the file that contains your base station settings or use the default name Config.bin. 8. Click the folder where you want to save the file, and then click Save. Back to the top Back to the top Disable firewall or antivirus programs For information about how to disable your firewall or antivirus programs, view the documentation that came with the program, or contact the manufacturer's technical support. Back to the top Back to the top Install firmware update Warning Do not install the firmware update from a computer that is connected to your base station by using a wireless network connection. If your wireless signal is interrupted, weakened, or interfered with while the firmware update is running, your base station may become unusable. Automatic update 1. Start the Microsoft Broadband Network Utility. 2. On the Help menu, click Check for Updates Online. The Broadband Networking Update Service checks for updates by connecting to Microsoft. This can take several minutes, depending on your connection speed. If any new updates are available, a download screen appears. Otherwise, you receive a ?No new updates are available? message. 3. Follow the instructions on the Broadband Networking Update Service page to update the firmware of your device. If the automatic update fails, go to the "Manual Update" section. Manual update 1. Download the MSBNDownload.exe firmware update. To do this, visit the following Microsoft Web site: http://go.microsoft.com/fwlink/?linkid=6... (http://go.microsoft.com/fwlink/?linkid=6790) 2. Save the file to a location such as your desktop or the My Documents folder. 3. If you are updating a wireless base station, use an Ethernet cable to connect your computer to your base station. 4. To run the update, double-click the MSBNDownload file. 5. Follow the instructions that appear on the screen to update the firmware of your device. While the firmware is being saved to your base station, the power light on the base station blinks and then turns orange. When the light is solid green, the update is completed. If the update fails, the power light continues to blink slowly until you successfully update the firmware. In this situation, you can try to update the firmware again, or you can reset the base station.

Feb 16, 2006 | Microsoft Broadband Networking MN-500...

1 Answer

How to update the firmware and software for my Microsoft Broadband Networking device


Back up base station settings Before you start, back up the current settings for your base station. To do this, follow these steps: 1. Start the Microsoft Broadband Network Utility. 2. On the Tools menu, click Management Tool. 3. When you are prompted to, log on to the base station. To do this, use the password that you created when you ran the Setup Wizard the first time. If you did not run the Setup Wizard, use the following default base station password: admin 4. On the Management menu, click Back up and Restore Settings. 5. Click Back Up Settings. 6. Click Save. 7. Type a name for the file that contains your base station settings or use the default name Config.bin. 8. Click the folder where you want to save the file, and then click Save. Back to the top Back to the top Disable firewall or antivirus programs For information about how to disable your firewall or antivirus programs, view the documentation that came with the program, or contact the manufacturer's technical support. Back to the top Back to the top Install firmware update Warning Do not install the firmware update from a computer that is connected to your base station by using a wireless network connection. If your wireless signal is interrupted, weakened, or interfered with while the firmware update is running, your base station may become unusable. Automatic update 1. Start the Microsoft Broadband Network Utility. 2. On the Help menu, click Check for Updates Online. The Broadband Networking Update Service checks for updates by connecting to Microsoft. This can take several minutes, depending on your connection speed. If any new updates are available, a download screen appears. Otherwise, you receive a ?No new updates are available? message. 3. Follow the instructions on the Broadband Networking Update Service page to update the firmware of your device. If the automatic update fails, go to the "Manual Update" section. Manual update 1. Download the MSBNDownload.exe firmware update. To do this, visit the following Microsoft Web site: http://go.microsoft.com/fwlink/?linkid=6790 (http://go.microsoft.com/fwlink/?linkid=6790) 2. Save the file to a location such as your desktop or the My Documents folder. 3. If you are updating a wireless base station, use an Ethernet cable to connect your computer to your base station. 4. To run the update, double-click the MSBNDownload file. 5. Follow the instructions that appear on the screen to update the firmware of your device. While the firmware is being saved to your base station, the power light on the base station blinks and then turns orange. When the light is solid green, the update is completed. If the update fails, the power light continues to blink slowly until you successfully update the firmware. In this situation, you can try to update the firmware again, or you can reset the base station.

Feb 16, 2006 | Microsoft Broadband Networking MN-100...

Not finding what you are looking for?

Open Questions:

Computers & Internet Logo

Related Topics:

1,038 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...