Question about Samsung HLR5667W 56" Rear Projection HDTV

2 Answers

Black screen with a Blinking lamp in the front

Hi!


i have a HLR 5667 SAMSUNG DLP and have a blank screen dont see any picture at all, but the lamp on the back seems to be working fine.so how does one know when the lamp is busted. THIS is a 2 year old TV,

Posted by on

  • jsilva1963 Jun 21, 2008

    samsung hlr5667w picure went out all three lights flashed,i replaced lamp

    now it has a humming noise and only flashes lamp HELP

  • riskyron Jul 07, 2008

    This morning my tv (HLR5667WAX/XAA) did the same thing. Screen went black but there is still sound. All the lights on the front of the tv are black as well. Unplugged the set for about 30 minutes, plugged it back in and turned it on. All was good for about an hour and then the screen went black again. Some forums say its the bulb while others say its the DMD board. Is there anyway to actually determine how to troubleshoot this? I need my tv back, my kids are going through withdraws!

×

2 Answers

Hi my name is Vince and I have a samsung dlp (model hl-r5667 w). Its about 4 years old and i have no warranty for the tv. Recently my lamp went bad so i purchased a new lamp and installed it myself and about 45 minutes later a there was loud pop and the screen wet black and the sound went out as well. Also the tv started making a loud humming noise. I had a tv repair guy come look at the tv and from the second he walked in the door he was on his phone arguing with some one for ten minutes and seem like he did want to work. Well he finally got after the call and told me that the light engine needs to be replaced. Do you think I should get a second opinion or does that sound about right? The only reason I ask is because he did seem like he wanted to work on the tv and had something else going that was more important. Thanks

Posted on Aug 11, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 59 Answers

Hi..if your lamp is on but no picture, then your lamp is good. Your problem is the DMD board (digital mirror display board) is bad. This is very common with Samsung DLP.

Posted on Mar 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a Samsung dnie model code spp4251x/data tv when powering up the front light comes on but no picture or anything anyone got some good info??


tv seems to turn on but no picture? - Forums - CNET

www.cnet.com > Forums > Samsung

CNETJun 11, 2015 - ... Samsung Dlp TV (HLR-5067W) it seems like the TV turns on butthere is no picture. ... the lamp is, light is visible from where the lamp is located but no picture. DLP Twon't turn on, blinking green lamp light then shuts dow ...
Jun 11, 2015
Samsung Plasma TV - Won't turn on
Jun 11, 2015
The timer, lamp, and standby/temp. light are flashing?!
Jun 11, 2015
Samsung TV Keeps Shutting Down
Jun 11, 2015
More results from www.cnet.com

TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
https://www.youtube.com/watch?v=kFdVi2ejfzA
May 8, 2014 - Uploaded by ShopJimmy.com
TV Repair Help for a TV With a Black No Image on the Screen ...I Have A Sanyo TV I Can Hear But Black Screen Im 14 And Dont Know What To Do ! .... power button the power light goes from red to green, the screen flashes on then goes black ....Troubleshooting LCD Backlight Failure Samsung LNT-4066 ...

Samsung plasma tv repair blinking light no picture ...




Jan 09, 2016 | Samsung Televison & Video

1 Answer

Samsung HLM507 FLICKERING PROBLEM


how extended is that warranty, and what does it cover? Sounds to me like a classic video controller board about to fail.

Mar 24, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

SMASUNG DLP 50 HDTV


defininatly the fan that cools the lamps is either not working or going out and needs replaced

Nov 12, 2007 | Samsung DLP HL-P5663W 56" TV

1 Answer

My samsung hlr 5667 lost its colors. Only displaying red pixels in the dark areas of the screen... help!


How is the color of the tv menu. If menu also bad replace light engine. If menu ok replace digital main.

Apr 23, 2009 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Samsung dlp turns on for few seconds and shuts off


lamp shuts off first..with sound still on and black screen.then turns off and has three blinking lights on front panel.

Jan 10, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

50? Samsung DLP TV Model #HLR-5067W


Did you use an original replacement lamp or an aftermarket replacement? From the price you give, it sounds like an aftermarket lamp, which are notoriously buggy and the problem may be with the lamp. If not, the lamp driver is your next likely culprit. It is also called a lamp power supply or lamp ballast.

Oct 19, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung 61" DLP 3 Blinking lights.


all 3 lights blinking means lamp has a fault the service manual says replace the lamp. If you need the service training manual for that model let me know and I will post the link as the training manual has excellent trouble shooting breakdowns for that model DLP

Mar 26, 2008 | Samsung HLN617W 61" Rear Projection HDTV

1 Answer

Pixilated (purple) on top half of tv


Not your bulb, prob with the display unit. Could be a driver or decoder IC...accordianman

Sep 27, 2007 | Samsung DLP HL-P5663W 56" TV

3 Answers

Dlp tv will not "fire up"


if your tv is on warranty take it back to the supplier.the problem with your tv is in the power supply there is a open regulator in that circuit along with the H .O. Transistor there is a black that feeds from the HOT to the flyback which also needs to check probably it is also open.good luck my friend

May 06, 2007 | Samsung DLP HL-P5663W 56" TV

Not finding what you are looking for?
Samsung HLR5667W 56" Rear Projection HDTV Logo

489 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1640 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...