How do you get the picture from rolling it has great picture and sound but we moved the tv to the living room and the picture started rolling is there a vertical or horizontal hold button and if so how do I access the buttons?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have a failing eeprom. The location on the board is IC002. The correct eeprom depends which microprocessor [IC001] and stereo decoder [IC1001] is used in your TV board. When removing old eeprom , insert a eight pin socket and solder into place. Now you may insert the new eeprom. This will be handy the next time you need to replace this IC the next time!
Sony's have dual tuning systems to allow for the separate PIP channel. The common problem on the Sony's is the circuit board and tuning module connections go bad. It is likely that the connections on the board or module were already in the decayed process and moving it just accelerated the issues that were inevitable.
The quick fix is to swap the PIP over to the main picture or to bus the antennae signal to the antennae B terminal thus bypassing the bad tuner module.
The recommended fix action is to have someone with soldering skills to remove the chassis, and locate all the cold and cracked solder joints, especially near the tuning modules. If this does not take care of the problem, the tuning modules will need to be removed for re-soldering on the actual tuner modules.
If none of the above works, then you can always use the audio/video outputs of a cable box or vcr to the a/v jacks of the tv, thus bypassing both tuners in the tv.
I have a sony trinitron kv35s40 and the problem is picture cuts off after a minute or so. We moved it to another room (it's really heavy 36") and it started with the problem.We live upstairs and can't bring it to a repair shop without a lot of effort.Please help What can it be?
The most common problem this set has is the Horizontal Output shorting, usually caused by the High Voltage transformer drawing to much current.
Whether it's the high voltage circuit or the power supply, having a tech look at this set would not be cost effective.
Start looking at the newer technology.
Hope this helped.