Question about Philips PM435S Remote Control
Tips for a great answer:
Sep 11, 2014 | Universal Remote Control Remote Controls
Jun 12, 2011 | Remote Controls
If the device you wish to control does not respond to any of the codes you
have entered using the Library Code Entry, you can search the entire code
library for a particular device that might not be listed in the Code List or
might be listed under a different brand.
When you enter a valid code for any given mode (e.g., when you enter a
code for a TV), the default key labels are displayed on the touchscreen and
any previously Learned functions for that mode are deleted. The mode is
reset to its power-on default state.
To search for a specific code in the Code List, follow these steps:
1. Manually turn on the device to be controlled (TV, VCR, DVD, etc.).
2. Press and hold the SETUP key on the rubber keypad until the LED
indicator light remains on and the touchscreen shows the Main Setup
Screen. This process takes approximately 2-3 seconds.
3. Release the SETUP key.
4. Press and release the LCD CODE key. The LED indicator light blinks
once to indicate acceptance of the keypress.
5. The touchscreen now shows the Device Setup Screen. Press and release
the device key on the rubber keypad for the device whose code you want
to enter (TV, VCR, SAT, etc.). The LED indicator light blinks once to indicate
acceptance of the keypress.
6. For AUX1 or AUX2, press the AUX device key. Select the desired device
key to be programmed under AUX (TV, VCR, SAT/CBL, etc.).
7. The touchscreen now shows the Code Setup Screen. Press and release the
LCD SEARCH key.
8. The touchscreen shows the Search Setup Screen. Press the ON•OFF key
on the rubber keypad repeatedly, until the device to be controlled
responds to the command and turns off.
Note: The Code Search starts from the currently stored code under that mode. For
example, if the device code list contains 100 codes and the currently stored code is
050, the Code Search starts from 051 and continues to 100 before looping back to
000 and finishing at 050. This speeds up the process of finding the correct code for
your device, since you may discover some codes can turn your device on and off
but are not able to control its other functions. This process allows you to
bypass codes you've already tried.
Mar 27, 2011 | GE JASRM24912 Remote Control
Lets you search for a code for a specific Brand within
the Code Library for a particular manufacturer.
1. Turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red
indicator remains on, then release SETUP button.
3. Press and quickly release the desired mode button
(TV, VCR, etc.). The red indicator blinks off once.
4. Press and release the numeric button (0-9)
corresponding to desired Manufacturer (see table on
code list sheet). The red indicator blinks off once.
Note, pressing "0" performs a full library search same
as normal Code Search Method on previous page.
5. Press the CHANNEL UP button ((or POWER or
PLAY (VCR only)) repeatedly until the device to be
controlled changes channel. The red indicator blinks
off with each button press. If you accidentally
overshoot the code required, press the CHANNEL
DOWN button to backtrack through the library until
the device changes channel. Pressing CHANNEL
UP changes direction to forward again.
6. Press and release MUTE to install the code.
Brand Search Method entry is now complete.
Note: When all codes under a Brand have been searched
the red indicator flashes rapidly for 3 seconds.
Mar 10, 2011 | Philips Remote Controls
Feb 28, 2011 | Philips Magnavox MRU1400 Universal remote...
you want to go into the autolock menu.
cursor right to enter the code.
Using the NUMBERED buttons,
enter 0, 7, 1, 1. "XXXX"
appears on the Access Code screen
as you press the numbered buttons.
"INCORRECT CODE" will
appear on the screen, and you will
need to enter 0, 7, 1, 1 again.
then cursor down to change the code to whatever you want.
found a manual at WWW .manualshark.org/manualshark/files/26/pdf_24753.pdf
may not be yours but may help.
Nov 29, 2010 | Philips Remote Controls
Mar 28, 2010 | Universal Electronics Pronto TSU9200...
Feb 08, 2010 | Philips SRU6061 Remote Control
Apr 08, 2009 | Emerson Remote Controls
Jan 12, 2009 | Philips PM3S Remote Control
15 people viewed this question
Usually answered in minutes!