Question about Mitsubishi WD-57731 57" Projection HDTV

1 Answer

Relaced bulb,now have problem with picture

The screen on my mitsubishi wd-57731 started going dim for a few days, and finally the red light came on. I relaced the bulb and now the picure is plenty bright but there is an area at the bottom center of the screen that is hazy or out of focus.I figured it must have something to do with the lamp since it was not like this before.so I tried putting a complete new lamp housing and lamp in but it is still the same.also cleaned off the back side of the screen, but no results. any ideas?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 301 Answers

Doe sit seem like there is a "glow" around lightly colored items on dark screen. if so suspect the optical engine has internal contamination( dirt or dust) it is almost impossible to clean it then put all back together and not introduce any other contamination i suggest replacing optical engine under these circumstances.

Posted on Apr 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinking yellow light on Mitsubishi wd 57731


Based on the service manual:
Blinking yellow= Lamp cover is open.
It could be something else!

www.aaatvservice.com

Aug 09, 2014 | Mitsubishi WD-57731 57" Projection HDTV

1 Answer

My wd-57731 will not trun on relace the five volt Capacitors with 1000f/35v


Hello,
if you have change the power capacitor which are the major common problem, Power supply board just die.It can be dead at anytimes.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement. Hope this will help out in solving the problem...

Aug 20, 2011 | Mitsubishi WD-57731 57" Projection HDTV

1 Answer

A message flashes at the bottom of the screen


tv is overheating.  possible that fan not working or temperature protection circuit faulty.  check fan for excessive dirt first.  could be as simple as cleaning the fan

Jul 29, 2010 | Mitsubishi WD-57731 57" Projection HDTV

1 Answer

WD-57731 every 6mos bulb replacement


You need to make sure you have at least 6 to 8 inches of clearance behind the set. You may also need to replace the balast

Sep 08, 2009 | Mitsubishi WD-57731 57" Projection HDTV

1 Answer

Wd-57731 bulbs keep burning out 3 bulbs burnt


Contact Mitsubishi. Their is a national recall on that TV. GET then to replace the TV.

MR. TV Sales & Service Inc
Milwaukee Wisconsin 53405
(414) 762-8600
Established 1974

Mar 24, 2009 | Projection Televisions

1 Answer

Wd 57731


Thats a lamp abnormality, sound like the two 3300uf caps on the PWB PCB need replacing

Jun 29, 2008 | Mitsubishi WD-52631 52" Projection HDTV

Not finding what you are looking for?
Mitsubishi WD-57731 57" Projection HDTV Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...