Question about HP Photosmart C7250 All-In-One Thermal Printer

1 Answer

My hp photosmart c7250 will not clear printing jam. after reseting, the rollers keep running until it times out then displays a print jam.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,090 Answers

Sounds more like an out of paper response rather than a jamb. Make sure the pickup roller can actually catch the paper. Use a polymit to roughen the rollers slightly in the slot where the paper is contained. If you take the paper out and look down the slide that holds the paper you will see two or sometimes 3 rollers They can become shiny and fail to grab the paper. Make sure you use proper printing paper and not photocopy paper as this is the stuff that has resinous coating that causes rollers to become shiny.

To also ensure that there is not a tiny piece of paper covering the detection eye for paper jamb use a piece of stiff card and run it through the paper path with a little assistance from you pushing it while the roller turns. This will often remove any tiny bits of paper or waxy substance from the eye.

Please rate my help++++Thyanks for using FIXYA

Posted on May 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Paper jam c4100 photosmart printer


Step 1:

Step one: Remove any loose paper

Step 2:

Step two: Clear the jam from the All-in-One


CAUTION:Clearing a paper jam from the front of the product can damage the print mechanism. Gain access to and clear paper jams through the rear door whenever possible.

Step 3:

lear the jam from the back of the All-in-OneFollow these steps to clear the jam from the back of the product
  1. While the product is still on, disconnect the power cord from the back of the product.
  2. Press in the tab on the left side of the rear door to release the door. Pull the door away from the product to remove it.

Step 4:

  1. Gently pull the paper out of the rollers.CAUTION:If the paper tears, check the rollers and wheels for torn pieces of paper that might remain inside the product. Remove all the pieces of paper from the product to prevent more paper jams.
  2. Replace the rear door. Gently push the door forward until it snaps into place.
  3. Connect the power cord to the back of the product.
  4. Press the OK button to continue the current print job.

Mar 18, 2013 | HP Photosmart C4100 series

1 Answer

I am getting an error mesage on my hp c7250 oxc05d1381


Press and hold the '*' key on the key pad, then press the '#' key and release them both. Then enter '123' to enter maintenance mode. Press the right arrow (beside the OK button) until System Config. menu appeared on panel. Then press OK two times to clear the error condition, then cancel two or three times to return to the top menu. Then powered off and back on, printed a test page just fine, copied a document fine.

I hope this will help

Jan 26, 2012 | HP Photosmart C7250 All-In-One Thermal...

1 Answer

HP Photosmart C7250 lines in photos


Replace print heads.. For draft or letter work you can adjust with this print heads, but photo prints you need good healthy conditioned print heads.. as per you info you did every thing rest only thing to replace..

Jan 09, 2012 | HP Photosmart C7250 All-In-One Thermal...

2 Answers

Black ink won't print


follow below user manual of HP Photosmart C7250
HP Photosmart C7250 user manual

black ink use is high in all kinda printings so i think your black ink is empty, click above link and download user manual and folow the instructions to remove and replace new black ink cartradge...

Jan 19, 2011 | HP Photosmart C7250 All-In-One Thermal...

1 Answer

I just installed two ink cartridges in my HP Photosmart 7250 and every time I try to print it says the yellow cartridge is empty and it will only print in black, not color, but when I select black only it...


I just had the same problem on my printer and found that resetting the printer solved the problem.


  1. To reset this printer, make sure the printer is on. Unplug the printer without turning the printer off.
  2. Wait 60 seconds.
  3. Hold down the # and 6 button while plugging the printer back in. Keep holding the # and 6 down while the printer turns on. After a bit, on mine there was a picture of the power symbol that appeared on the printer display.
  4. When the power symbol appears on the printer display, take your fingers off the # and 6 button.
  5. Push the power button to turn the printer off. Push the power button again to turn the printer back on. The printer will take some time to go through some preparation. When the preparation is complete, the printer will recognize that the cartridges are full.
I am an HP employee. I do not represent HP on this site.

Oct 25, 2010 | HP Photosmart C7250 All-In-One Thermal...

1 Answer

THE BLACK DOES NOT PRINT. ON MY HP C7250


First of all, I hate to say this but, be sure you are using a genuine HP 02 black cartridge. Refilled / re-manufactured cartridges can cause damage to the printheads because their formulas are sometimes too acidic.1) Press the SETUP button on the front panel by the display. 2) press the DOWN arrow until "Tools" is highlighted on the display and then press the OK button 3) Arrow down again until you see "Clean Printheads" and press OK again. 3) After cleaning, press Setup again.. Arrow down to "Print Report" and press OK. 4) Arrow down to "Self-test Report and hit OK again. Your printer will print out another page. If the black ink is flowing on the self-test page but yet not when u are using the computer, then there's got to be some software problem on the computer itslelf. If it still doesn't print from the black printhead the we usually have either a print head failure or an IDS (Ink Delivery System) failure.

Jul 21, 2010 | HP Photosmart C7250 All-In-One Thermal...

2 Answers

HP C7250 w Vista PC inserts a blank page between every printed pg


You have told it to print a "seperator page"

your hp software has this setting and you need to turn it off

Aug 22, 2009 | HP Photosmart C7250 All-In-One Thermal...

2 Answers

Constant paper jam


It appears to be the printer it self is malfunctioning and may require service. Please call your printer manufacturer and ask for warranty.

Aug 14, 2009 | HP PhotoSmart C4280 Laser Printer

1 Answer

Jamming problem 5600


Possible sticky ink spill or torn piece of paper in the rollers. Inspect and clean the roller areas.

RDO

Nov 17, 2008 | HP Photosmart 2410 All-In-One InkJet...

Not finding what you are looking for?
HP Photosmart C7250 All-In-One Thermal Printer Logo

493 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...