Question about Polaroid FLM-3732 Television

Open Question

Polaroid LCD no picture

Hi,
I conencted mi LCD poalroid with a VGA cable to my pc, and when i disconencted it my tv stop showing any signal, it was tured on (the light on th ledger was blue as in ''on'') but the screen was just black. I disconnected it from the power supply and now it doesnt even turn on. What can I do?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 37" Polaroid LCD TV No signal appears when select channel

So, I couldn't get the tuner to work (tried everything). Eventually I realised the cheapest solution would be to buy a digital set top box, and use this as the tuner instead of relying on the one built-in to the TV. Works fine.
But yes, I won't be buying another Panasonic in a hurry.

Posted on May 24, 2008

  • 1 Answer

SOURCE: 37" polaroid lcd tv won't turn on

It worked. I replaced the two bad capcitors on the control board and presto. Thank you for solving this. I just about threw away my expensive HDTV, but for only 20 bucks it now works. I hope we can let more people know.

Randy

Posted on Oct 16, 2008

  • 34 Answers

SOURCE: TV won't turn on

I have fixed many polaroids, the problems is most of the parts are contained in one self contained control box. it sounds like your power board is not funtioning. contact polaroid and let them know about your problem and see if you can get a new control panel. the contol panel only has one connection and 3 screws to replace. hope this helps.

Posted on Apr 08, 2009

dsacco86
  • 1077 Answers

SOURCE: POLAROID TLA-04011C does not turn on

The most likely the TV has a power supply related problem or it maybe just a blown fuse inside the TV.
I can't say it's 100% the problem because I can't actually look at the tv over the internet.
If by some chance the TV is still under warranty, go that route.
If not under warranty and If you have some electronic experience, you can purchase a Service Manual over the internet and diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you circuit diagrams, test points, and part# lists. Usually, cost under $20.

I hope I shed some light on the subject for you.

Posted on Jun 28, 2009

Raider2845
  • 11 Answers

SOURCE: I have a Polaroid 37" LCD TV (FLM3732)

I had posted some vids on youtube a long time ago about how to fix this. You can search flm3732 repair or go right ot my channel to watch the 5 short vids. www.youtube.com/raider2845 Hope it all works out for you. Good luck

Posted on Dec 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with VGA signal


Try using a HDMI cable instead

Dec 15, 2013 | Televison & Video

1 Answer

I am trying to hook up my Dell inspiron 1520 to my viewsonic n2750w tv. Is there an easy way to do this?


Yes there is... You are going to need a VGA cable and an 1/8 audio cable (for sound)

http://support.dell.com/support/edocs/systems/ins1520/en/om_en/pdf/UX8623D.pdf - On page 29 it shows a picture of the right side of your computer. You will hook the VGA cable to the VGA port (Number 8 on the diagram).
The on your tv you will hook it up to the vga port as well. Page 7 of the following document shows a pictures of the back of your tv. You will hook it up to "L" on the diagram. Be careful to not bend the pins in the connector. http://www.viewsonic.com.au/support/manuals/files/LCd%20TV/N2750w%20User%20Guide%20English.pdf
Switch your tv over to the PC input by clicking the "Input" button. Then make sure your PC is sending a signal, you might have to hit the function key to switch the view.

Mar 05, 2011 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

I conect my lenovo laptop Y 410 with Panasonic THP42C10 D for Vidio There are no sound in TV


Hi dr_piyushpat,

I see that you conencted your Lenovo Y410 to a Panasonic THP42c10 LCD TV, see details below.

*The Audio will dpened on what cable connection you have from the Laptop to the LCD TV,
*You have Y410 I do not think that HDMI will be an option.
*I believe that you are using the VGA port on the Machine for an extended Video.
*The Audio will really not be coming out of the Panasonic TV if you are using a VGA cable since that is only for Video you will need an audio cable Jack that will relay audio from the Laptops Audio Jack to the Audio Jack of your Panasonic TV thsi is the only way you can get audio out from the Laptop since you are conencted using a VGA cable.

* do not think that HDMI is present on your Lenovo Y410, but if ever you may have that connection/port the way to get Audio from an HDMI conenction is to change the audio PLayback properties and selct HDMI as the default device for the Audio to work using HDMI.

I hope that this helps.

have a nice day,

mvincentc

Feb 13, 2011 | Lenovo 3000 Y410 Laptop

1 Answer

No picture on lcd while trying to connect laptop


Use a different vga cable if that doesn't work change the settings on your laptop video output. If yo are not getting a signal from any input main board needs to be replaced to my knowledge most places only refurbish the main board or whole module. they usually ask you to send yours in before they send out a refurbished on.

Jul 04, 2010 | Polaroid 4241-TLXB 42 in. LCD Television

1 Answer

Monitor shows on no picture


Hi,

The first thing that we will have to check is if it is a hardware problem or not so to check this we need to do a self test on the monitor.Disconenct all the external devices even the cable for the internet so the cables that should be connected would be the cable for the monitor,power,keyboard and the mouse.Disconenct the cable for the monitor that is the VGA cable that has a blue connector whic has screw's on it .Once that is disconnected turn the computer on ,you should be getting a message on the monitor that has a message no input signal or check video cable .There has to be some kind of message that tells you that the cable is disconencted .If it has a message then it means the monitor is good or else if no message then it tells us that the monitor has gone bad and it needs to be replaced.

If the monitor has the message then turn the computer off and then when u turn it on tapp the F10 key for XP and F11 for vista ,tapp the key until you get a black screen that says advance boot menu options then select the option that says enable vga mode and then hit the enter key .When you get the log on screen select administrator and then it will take you to the desktop .Please tell me what happens so that i can help u further .The trobleshooting steps vary depending what is the response by the computer so i am waiting for your reply...

all the best

May 09, 2010 | HP W22 LCD Monitor

2 Answers

We connected the computer to polaroid lcd screen and it doesnt want to turn on can any one help me


l;kl

  1. Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s.
  2. Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
  3. Press the button on the remote to turn on the LCD TV.
  4. Press the Input button on the remote to select COMPUTER.

Sep 11, 2009 | Polaroid 3211TLXB 32 in. LCD Television

2 Answers

Why won't my tv display my computer screen


Hi. The best way to hook your computers display to your LCD screen will be to use the VGA input socket. If your video card can support both S-video input and VGA, you can use either one but, the VGA is best for optimal resolution. This is the easy way to do this. Step one, connect the VGA cable to the computers video card and then, run the other end of this same cable to the VGA input slot on the LCD screen.Step 2, next you will make sure that the LCD's input selection is selected to show what is being transferred from the CPU video card by using the input button on the lcd remote control. The lcd(your tv) should be on VGA or PC input signal. Step 3, now, you Will have to also make sure that your video card is set to transfer this signal as well by pulling up your video cards software window and switch to the proper options. once this is done, you should get a signal. Be sure to use the VGA input/output ports on both the lcd television and your cpu for optimal transfer of the video stream. Here is a pic of your back panel. use the input port labeled I for good PC input quality.


26bbce1.jpg

Mar 24, 2009 | Proscan 32LB30QD 32 in. LCD TV

1 Answer

How do i hook my compter to my tv


im assuming here you have a new LCD TV with High Definition

if you have a new LCD TV most of them come with either a HDMI input or a 15pin VGA input , if you computers graphics card doesn't have a HDMI output on the graphics card you can use a male to male VGA cable , they are used on most PC LCD screens if you don't need it , 15pin VGA cables usually have blue plugs and have 15 pins :) or you could go to an electronic store and ask for a male to male VGA cable.


once you get the pc conencted to the tv ,

1. right click on the desktop
2. click properties
3. click on the settings tab
from here you can change the resolution and make the TV look decent.

i hope this helps you :)

Apr 02, 2008 | Computers & Internet

1 Answer

Connect LG 42LY95 LCD to Toshiba Laptop


Hiran

can you use the vga source from your laptop to the pc input on the LG a standard vga monitor cable will do then set your laptop to output the vga signal

Scott

Mar 22, 2008 | Televison & Video

1 Answer

I am trying to connect my laptop to the Polaroid LCD TV, as i would like to use the TV monitor as a computer monitor (my laptop monitor is broken). So I connect the correct wire to correct places, however...


The simple patch that I found (same problem) was to start by using any old monitor that I could borrow to set up my Dell Laptop.
After getting the Laptop booted on a regular monitor I right clicked on the desktop and went to properties then to the settings tab.
Here I found the dual monitor settings (#2 will usually be dis-abled by default.)
Click on #2 monitor and set the resolution to the lowest number (800 x 600 works well)
Then I clicked on "make this monitor my primary monitor"
As soon as I clicked apply the PC Windows screen appeared on the Polaroid TV screen

Earlier I had set the secondary monitor as "extend this screen to this monitor"
This also worked but I had to "drag the current screen to the right all the way off the
"borrowed monitor" until it appeared on the TV screen. The mouse pointer will be there also.
At first it took a little getting used to but in a few minutes I was up and running.
Hope this helps your situation

David Flournoy
Waxahachie Texas

Mar 10, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...