Question about Hitachi 46F500 46" Rear Projection HDTV-Ready Television

2 Answers

Adjusting the bulbs

Can I adjust the bulbs on my tv?? Cuz all the bulbs are off a little bit and it make shadows!! Thanks. Joe

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

If you are talking about the picture looks 3-D then The best advice I can tell you at this point is to go to tvrepairkits.com and order the complete convergence kit for your model of TV set, no need to search and order multiple parts from different sources and pay multiple shipping fees! Go to http://www.tvrepairkits.com/xcart/home.php?partner=larry
The kit comes with original Sanyo STK IC'S , not those cheap aftermarket or china made IC'S full pictorial directions, the thermal paste, resistors, the correct Pico fuses, AND free live on-Line tech assistance in case you run into a problem with the repair. They ship out 2 to 3 day Priority mail, the next day in most cases GOOD LUCK!!!
Larry Dillon.
http://www.fixya.com/support/r3342653-convergence_fix

Posted on May 08, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 8,457 Answers

It not the bulb,ur tv have convergence problems,the 2 STK convergence ICS are defective and it dying.The shop will fix it for u about $300-350 for parts and labors.

Posted on May 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 60 inch Mitsubishi and there are light red shadows in the tv. is this an easy fix


It sounds like you need to re-adjust your convergence. The purpose of adjusting your convergence is to align your red, green, and blue colors. Moving your TV often causes this problem. I hope you get it going.

Sep 02, 2014 | Mitsubishi WD Televison & Video

1 Answer

My 2007 honda shadow starts with choke on but when push choke in dies out


Your fuel mixture may just need adjusting or your carbs may need some cleaning the adjustment is a bit painful as it requires a special tool for the carbs if you take it in for a oil change ask em about adjusting the carbs for you - a good shop will have it done in a jiffy

Jun 14, 2014 | 2005 Honda VT 750 Shadow Aero

1 Answer

50HP66 50 in. Plasma Television: i have red dots/shadowing on my tv...


I got the red dots really bad on my toshiba 50hp66 after an hour or two of watching tv. I found out that if you open up the tv in the back on the left you will find two adjustment pots labelled Vsc and Vy. I took a sharpie and marked where the factory defaults were first. Then I adjusted the Vy pot down a little bit and the red spots were gone! My tv looks great again!

May 16, 2010 | Toshiba 50HP66 50 in. Plasma Television

1 Answer

Proper engine idol...."Too much air going through the engine"


Try slowing things down at the throttle cable adjustment first. Then you can richen it up at the carb to get where you want to be.

Sep 26, 2009 | 2004 Honda VT 750 Shadow Aero

1 Answer

Can you hear when valves need adjusting on 1997 shadow spirit? Can it hurt the bike if you ride it with out adjusting valves? I hear a "ticking" at medium to high RPM. Not sure if it is valve or something...


If the ticking sound speeds up when you throttle up more than likely its the valve you are hearing.
If your valve need adjusting and you continue to ride it you have a greater chance of burning the valve out or floating a valve at higher RPMS.

Aug 12, 2009 | 1997 Honda VT 1100 C Shadow Spirit

1 Answer

Why does my TV have a red shadow on all the people and words. i've only had it 4 1/2 yrs


It sounds like the red gun is off. Your tv uses three guns(red,green and blue) to make the picture. sometimes one of these guns shifts a little and the colors get messed up and there are shadows because the gun is still trying to make the image, it just doesnt line up. This is a pretty inexpensive problem that can be fixed by most any tv technician for a small fee. If your pretty confident in your electronics know how, google adjusting guns and your tv and that should yield something.

Oct 20, 2008 | Televison & Video

1 Answer

Red shadows around images on screen, setting convergence doesn't help


HELLO. it not in adjusting the len's it's in the convergance board. the IC'S ON THE BOARD NEED TO BE REPLACED."GOOD LUCK"

Jul 25, 2008 | Akai PTH5498 54" Rear Projection...

1 Answer

Green and red shadows


try adjusting the color purity knob.one by one,or if it is really bad tube u can extend it by rejuvinating it.

Mar 24, 2007 | Toshiba 43H71 43" Rear Projection...

Not finding what you are looking for?
Hitachi 46F500 46" Rear Projection HDTV-Ready Television Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...