Appears to be printing but nothing on page

Quite simply, the printer you are working with, according to the manufacturer's website, cannot print onto CDs.
I hope this helps!

Has the cartridge been incorrectly refilled?

You may need a new printhead now, or you may have left a foam packing block inside the new purge unit.

your printer the error Purge unit problem

If you can reach in and get the printhead to move to the center, you need to remove the printhead and see if it powers on. Many times a defective printhead will keep it from powering up.

no need to reset your printer, the things your should do is you just open the over at the back of your printer, then you can see a paper hang on, then please remove it, then try to print, if it does not work open also the tray which is your bond paper stored, just see if there is also a bond paper hang, then remove it, then print again, that the cause of paper jam 


 Good Luck!!
 Nice

Yes,it means the fax did not go through,it will show OK on the report if it was succesfull

Uninstall the software and reinstall. Use an ethernet cable and try scanning. If that does not work then your scanner feature has a problem. Probably very expensive so I suggest you go to the Epson site and look under Clearance. New/Refurbished have a 1 year warranty, replacements are quick and free shipping both ways. A All-In-One is $45 shipped, the ink costs more than that. Check this website for CISS system which saves lots of money.

http://www.inkproducts.com/ink-store/

If you want to maintain the quality of the pictures, you should get a picture handling program like Corel Photo Album. There are always sales on the software and on sale it's not very expensive. If you are just printing web pictures, you could copy the pictures (.jpg format works best) you want to print into a word processing document, scale and arrange them and print them.
Corel Photo Album works wonderfully with Canon printers and you have innumerable options plus scrapbooking your pictures.

Uninstall the printer driver completely, then reinstall the driver again.