Question about Mitsubishi VS-60805 60" Rear Projection Television

1 Answer

Covergance problem. I found R8E00 and R8E03 cooked. Is this an indication that IC8D01 and IC8D02 are also bad?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers

Hello kidfarm,

Yes it is a good chance these two amplifiers are bad, since the convergence amps are usually connected as pairs.

red red green green blue blue
AMP1 AMP2

and I'll even venture to say that the resistors go to your green amplifier pair so in that case both AMPs (IC8D01 and IC8D02) should be changed out.

Posted on Mar 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know the wattage of my magic chef oven model 6898VV


Hi Nadia,

There's little to be found on the internet for this model oven now. There should be a name plate / manufacturer's sticker either inside the door - on the jamb; or on the rear near the power cord. If you see a rating given as "120VAC / 1200W" this would indicate INPUT wattage, which would be higher than the amount used for cooking. A typical 1200W rated microwave might have 800 - 1000 Watts of cooking power. If there are 2 ratings for wattage like 120V / 1200W / 850W; the 850 Watts is the amount of cooking power. The cooking power - or wattage - is always lower than the total wattage. If you see a rating somewhere that indicates 900W cooking power, then that would be the cooking power of the oven.

If you're not satisfied or unsure about the information you're finding on the oven - or it is missing - you might want to contact Magic Chef Customer Service Department at (888) 775-0202. They should be able to help you - or pint you in the right direction.

Good luck!

Apr 07, 2014 | Magic Microwave Ovens

Tip

Mitsubishi Convergence IC Part Number List


<b>As there has been some serious errors made in identifying the IC's for Mitsubishi Convergence, I have posted the complete list for your use.</b><br /> <br /> <b>Mitsubishi Convergence IC Part # List (complete)</b><br /><br /><br />Ref # / Part # / Part Name & Description <br /><br />CHASSIS: VZ7 <br />MODELS: VS-45605 / VS-50605 / VS-50705 / VS-55705 / VS-60705 / VS-70705 <br />IC8C01 267P141030 HIC-<b> STK392-110 </b><br />IC8C02 267P141030 HIC-<b> STK392-110 </b><br /><br />CHASSIS: VZ8 <br />MODELS: VS-45607 / VS-50607 / VS-60607 / VS-50707 / VS-55707 / VS-60707 VS-70707 <br />IC8C01 267P141030 HIC - <b>STK392-110 </b><br />IC8C02 267P141030 HIC - <b>STK392-110 </b><br /><br />CHASSIS: VZ9 <br />MODELS: VS-45609 / VS-50609 / VS-55609 / VS-60609 / VS-60719 / VS-70709 <br />IC8C00 267P155010 HIC - <b>STK393-110 </b><br /><br />CHASSIS: VZ6-V15 <br />MODELS: VS-70803 / VS-80803 / WS-65903 / WS-73903 <br />IC8D01 267P120010 IC-H <b>STK392-040 </b><br />IC8D02 267P120010 IC-H <b>STK392-040 </b><br />MODELS: VS-50800 / VS-50803 / VS-60803 <br />IC8D01 267P120010 IC-H <b>STK392-040 </b><br />IC8D02 267P120010 IC-H <b>STK392-040 </b><br /><br />CHASSIS: V16 <br />MODELS: VS-50805 / VS-60805 / WT-46805 / WS-55805 / WS-55905 / WS-65905 / WS-73905 <br />IC8D01 267P120010 HIC - <b>STK392-040 </b><br />IC8D02 267P120010 HIC - <b>STK392-040 </b><br /><br />CHASSIS: V17 <br />MODELS: WT-46807 / WS-55807 / WS-55857 / WS-55907 /WS-65807 / WS-65857 / WS-65907 / WS-73907 <br />IC8C01 267P150010 HIC - <b>STK392-570 </b><br />IC8C02 267P150010 HIC - <b>STK392-570 </b><br />MODELS: WS-55908 / WS-65908 <br />IC8C01 267P150010 HIC - <b>STK392-570 </b><br />IC8C02 267P150010 HIC - <b>STK392-570 </b><br /><br />CHASSIS: V18 <br />MODELS: WT-46809 / WS-55809 / WS-55819 / WS-65809 / WS-65819 <br />IC8C01 267P150010 HIC - <b>STK392-570 </b><br />IC8C02 267P150010 HIC - <b>STK392-570 </b><br /><br />CHASSIS: V19 <br />MODELS: WS?55859 / WS?55909 / WS?65869 / WS-65909 / WS-73909 <br />IC8C01 267P155010 HIC - <b>STK393-110 </b><br /><br />CHASSIS: V20B <br />MODELS: VS-A50 / WS-A48 / WS-A55 / WS-A65 <br />IC8C01 267P141030 HIC - <b>STK392-110 </b><br />IC8C02 267P141030 HIC - <b>STK392-110 </b><br /><br />CHASSIS: VK20 <br />MODELS: WT-42311 / WT-A42 <br />IC8C01 267P141030 HIC -<b> STK392-110 </b><br />IC8C02 267P141030 HIC -<b> STK392-110 </b><br /><br />CHASSIS: V20 <br />MODELS: VS-50111 / VS-60111 / WS-48311 / WS-55311 / WS-55411 / WS-65311 / WS-65411 / WS-73411 <br />IC8C01 267P141030 HIC - <b>STK392-110 </b><br />IC8C02 267P141030 HIC - <b>STK392-110 </b><br /><br />CHASSIS: V21 <br />MODELS: WS-48511 / WS-55511 / WS-55711 / WS-65511 / WS-65611 / WS-65711 / WS-65712 / WS-73711 / WS-B55 <br />IC8C01 267P155010 HIC - <b>STK393-110 </b><br /><br />CHASSIS: K20 <br />MODEL: WT-42313 / WT-42315 / WT-42413 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250 </b><br /><br />CHASSIS: V22 <br />MODELS: WS-48313 / WS-48413 / WS-55313 / WS-55413 / WS-65313 / WS-65413 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250 </b><br /><br />CHASSIS: V23 <br />MODELS: WS-48513 / WS-48613 / WS-55513 / WS-55613 / WS-55813 / WS-65513 / WS-65613 / WS-65713 / <br />WS-65813 / WS-73513 / WS-73713 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250 </b><br /><br />CHASSIS: V24 <br />MODELS: WS-48315 / WS-55315 / WS-65315 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250 </b><br /><br />CHASSIS: V25 <br />MODELS: WS-48515 / WS-55515 / WS-55615 / WS-55815 / WS-65515 / WS-65615 /WS-65815 / WS-73615 <br />IC8C01 267P173010 HIC - <b>STK394-250 </b><br />IC8C02 267P173010 HIC - <b>STK394-250</b>

on Jun 10, 2011 | Televison & Video

Tip

Mitsubishi Convergence IC Part Number List


As there has been some serious errors made in identifying the IC's for Mitsubishi Convergence, I have posted the complete list for your use.

Mitsubishi Convergence IC Part # List (complete)


Ref # / Part # / Part Name & Description

CHASSIS: VZ7
MODELS: VS-45605 / VS-50605 / VS-50705 / VS-55705 / VS-60705 / VS-70705
IC8C01 267P141030 HIC- STK392-110
IC8C02 267P141030 HIC- STK392-110

CHASSIS: VZ8
MODELS: VS-45607 / VS-50607 / VS-60607 / VS-50707 / VS-55707 / VS-60707 VS-70707
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: VZ9
MODELS: VS-45609 / VS-50609 / VS-55609 / VS-60609 / VS-60719 / VS-70709
IC8C00 267P155010 HIC - STK393-110

CHASSIS: VZ6-V15
MODELS: VS-70803 / VS-80803 / WS-65903 / WS-73903
IC8D01 267P120010 IC-H STK392-040
IC8D02 267P120010 IC-H STK392-040
MODELS: VS-50800 / VS-50803 / VS-60803
IC8D01 267P120010 IC-H STK392-040
IC8D02 267P120010 IC-H STK392-040

CHASSIS: V16
MODELS: VS-50805 / VS-60805 / WT-46805 / WS-55805 / WS-55905 / WS-65905 / WS-73905
IC8D01 267P120010 HIC - STK392-040
IC8D02 267P120010 HIC - STK392-040

CHASSIS: V17
MODELS: WT-46807 / WS-55807 / WS-55857 / WS-55907 /WS-65807 / WS-65857 / WS-65907 / WS-73907
IC8C01 267P150010 HIC - STK392-570
IC8C02 267P150010 HIC - STK392-570
MODELS: WS-55908 / WS-65908
IC8C01 267P150010 HIC - STK392-570
IC8C02 267P150010 HIC - STK392-570

CHASSIS: V18
MODELS: WT-46809 / WS-55809 / WS-55819 / WS-65809 / WS-65819
IC8C01 267P150010 HIC - STK392-570
IC8C02 267P150010 HIC - STK392-570

CHASSIS: V19
MODELS: WS–55859 / WS–55909 / WS–65869 / WS-65909 / WS-73909
IC8C01 267P155010 HIC - STK393-110

CHASSIS: V20B
MODELS: VS-A50 / WS-A48 / WS-A55 / WS-A65
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: VK20
MODELS: WT-42311 / WT-A42
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: V20
MODELS: VS-50111 / VS-60111 / WS-48311 / WS-55311 / WS-55411 / WS-65311 / WS-65411 / WS-73411
IC8C01 267P141030 HIC - STK392-110
IC8C02 267P141030 HIC - STK392-110

CHASSIS: V21
MODELS: WS-48511 / WS-55511 / WS-55711 / WS-65511 / WS-65611 / WS-65711 / WS-65712 / WS-73711 / WS-B55
IC8C01 267P155010 HIC - STK393-110

CHASSIS: K20
MODEL: WT-42313 / WT-42315 / WT-42413
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V22
MODELS: WS-48313 / WS-48413 / WS-55313 / WS-55413 / WS-65313 / WS-65413
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V23
MODELS: WS-48513 / WS-48613 / WS-55513 / WS-55613 / WS-55813 / WS-65513 / WS-65613 / WS-65713 /
WS-65813 / WS-73513 / WS-73713
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V24
MODELS: WS-48315 / WS-55315 / WS-65315
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

CHASSIS: V25
MODELS: WS-48515 / WS-55515 / WS-55615 / WS-55815 / WS-65515 / WS-65615 /WS-65815 / WS-73615
IC8C01 267P173010 HIC - STK394-250
IC8C02 267P173010 HIC - STK394-250

on Oct 11, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Is problem covergance is bad model kp-fx43m91


I have Sony projection tv model FX 43 m 91 spiel no 1002334 in Mumbai India . I can see blue and red colour in every pitcher so let me know solution or any reliable official service centre

Aug 15, 2012 | Sony KP-FX532M91 TV

1 Answer

The convergence will randomly unconverge with the blue and red seperating. this flickers every so often. convergence is normally correct until this glitch happens. Can anything be done?


You may have bad solder on the
covergance board , the chip do get hot.
shake the tv a LITTLE when its on and
see if you can make it happen ,
if so its a resolder job

Jun 30, 2009 | Toshiba TP50G60 50" Rear Projection...

1 Answer

Sony KP-61XBR200 Convergence problem, when i press auto focus on the front of tv it runs its process then at the end reads (E 14G) the green color makes a bad shadow on the screen. when i cover up the...


one of the covergance chips has died
i replace both when i service a covergance
problem, they cost around 20.00 to 40.00 etch
and there easy to locate inside the tv to
get a part #

Jun 24, 2009 | Sony KP-61XBR300 61" Rear Projection...

1 Answer

Mitsubishi vs-70803 Bad picture, please help


The parts you need to fix the TV are 2 integrated circuits with the following number STK392-040 and the locations of the parts is IC8D01 and IC8D02.
You can find the parts you need here or you can also contact this website and ask them for a convergence repair kit for your TV. They will provide you with the ICs and low value resistors just in case they are damaged.
Good Luck.

Mar 01, 2009 | Mitsubishi WS-65907 65" Rear Projection...

1 Answer

Ws55805 convergence circuit


Resistirs are designed to protect the circuits on the PCB. This is designed to allow a much cheaper part to burnout before the more expensive circuitry burns.

Oct 13, 2008 | Mitsubishi WD-52525 52" Rear Projection...

4 Answers

Model# ws-55805 mitsubishi tv HD


I had the exact same problem. I read the posts - jiggled the large heat sinc and saw the instant improvement of the convergence - intermittently - (the most helpful posts by FFJim and MikeNJ1964 thank you!). I then got a copy of the repair manual (online) and isolated the two Convergence Power Chips IC8D01 and IC8D02 according to the repair manual and are parts HIC-STK392-040). I was able to use an alternate way to get to the cold solder joints (broken solder points) on the bottom of the entire motherboard (all three boards) assembly (without removing the middle board) by removing many of the cables (9 or so) and leaving just the tube cables in the back right corner connecting the RGB complex. After removing the cables, and unscrewing the 3 wood screws holding down the plastic (black) housing holding the main boards, I was able to slide out, lift and twist the motherboard assembly on it's side while leaving the RGB complex cables at their location. Looking at the bottom of the motherboard assembly (inspecting all the solder joints) I found the area of cold solder connections for the STK392-040 by seeing where the two Mitsubishi WS-55805 IC8D01 and IC8D02 solder points were located. It appears the reason these solder points get loose is becaus of the large Heat Sinc they are connected to would heat up, lean and will break loose with movement of the TV. By just re-soldering the cold broken lead points (which were visible) it repaired my unit entirely. This can be done at home with just a simple solder iron and solder (make sure you heat the lead and solder pad and apply the solder to the hot area (not the iron). I had to do that to about 6 of the 30 or so leads. Then, I retraced my steps assembling the unit and it worked great!
Here is an image of my main board assembly from the manual.0da1d36.jpg

Aug 04, 2007 | Mitsubishi WS-55805 55" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-60805 60" Rear Projection Television Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1208 Answers

The Knight
The Knight

Level 3 Expert

73427 Answers

Jaime Hernandez

Level 3 Expert

2311 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...