Question about Barebone Systems

1 Answer

How to change paper on the casio dr-t120 calculator

Posted by on

1 Answer

Ouk';,'piuopui

Posted on Mar 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Paper wont feed and printer displays paper jam or out of paper when paper tray is full


Hi, maybe the feed roler is dirt or used try to clean the roler, if the printer don't work change the roler.

Mar 24, 2012 | Barebone Systems

3 Answers

HP 4215xi all in one, continues to give the error paper jam, there is no paper jam. I have cleaned all sensors, rollers etc. I have tried a partial and full reset. Any ideas?


Hi,
  1. Turn off the HP product and turn it around so the back of the unit faces you.
  2. Disconnect the power cord from the back of the all-in-one. The power cord must be disconnected to allow the paper feed rollers to turn freely.
  3. Locate and open the rear access door by pressing in on the left side tab and then pulling the door toward you. Figure 2: Removing the rear access door
2f7e0aa.jpg



Inspect the pressure rollers on the rear access door and verify that they are clean and turn freely. Clean the rollers if needed with a soft towel lightly moistened with water. If the rollers do not turn freely, replace the rear access door. Click How to Buy on this page to order replacement parts.
  1. From the rear access door opening, remove the jammed paper.
  2. Remove the remaining paper from the paper supply tray. Discard any paper that is damaged or crumpled and then re-stack and reload the paper into the paper supply tray.
  3. Reinstall the rear access door.
  4. Reconnect the power cord to the unit and turn the unit on.

The following information will help prevent paper jams from occurring:
  • Never use paper that is torn or wrinkled.
  • If you are having problems using paper that has already been printed on once (recycling), replace it with new paper.
  • Remove and then reinstall the rear access door. Verify that the access door is fully locked in place. The paper can skew if the rear access door is not locked.
  • Every six months to one year, clean the paper feed rollers with a rag lightly moistened with water. Over time the paper feed rollers accumulate dust and do not function as well as they once did.
  • When printing envelopes, tuck the flap into the envelope and crease the folds before printing.
Goodluck..

Mar 17, 2008 | Barebone Systems

1 Answer

I have a Friden Model 130 Electronic Calculator and am interested in its current value?


Dear workmangk. I have a working EC 132. Your EC 130 was the 1st solid state calculator. My father used to sell & support them. I estimate a working model could be worth $US1000 +. I bought my non working EC 132 for around $400 some 8 years ago. They are difficult to obtain now. Best wishes, Gordon. Adelaide. Australia

Jul 21, 2011 | Barebone Systems

1 Answer

Samsung scx 4016 won't print some word documents. says no paper


Have you checked the paper cartridges? If you have supplied the paper cartridges with paper but the no paper message sill persists the sensor in the cartridges might not be functioning.

Mar 29, 2008 | Barebone Systems

1 Answer

Paper jam


open all door in your printer , front and back. , look for paper stuck inside and remove it. Sometimes small pieces of paper are difficult to be found.
If it is a Laser printer, you will also need to remove the toner and paper try and look for jammed papert underneat.
Once you done, restart the machine.
If you still have paper jam error try unplugging printer from power outlet for 5 minutes then restart.
If you still get error, then either there is paper inside or your printer may be faulty.

Regards

Mar 15, 2008 | Barebone Systems

1 Answer

I have several items ready to print from the printer, and I don't know how to get it to print -- Right now it is on the picture printer and I don't know what to do to get it to print regular documents. ...


Hi grace goto to start, control panel, printer and faxes, and look for your printer. click on printer preference and thats where you can change the size of paper, and anything else you would like to change. hope it works for you.

Feb 02, 2008 | Barebone Systems

1 Answer

Printer out of paper error on HP694c


  1. Turn the printer off and open the cover.
  2. Lift the right black rectangular paper sensor (located in the middle of the printer just below cartridge slides) clean it up, try with vacum cleaner first if it does not help use coton swabs and clean it.
Good luck
RC

Jan 30, 2008 | Barebone Systems

1 Answer

Since I changed ink in my pixma mp 600, paper gets stuck in both feeders. I can not get it to print.


Go here. http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=116&modelid=13800#SupportDetailAct
Click on the Service & Support tab. Type in the search window: Paper does not feed through printer. Click search. Typed in Red you'll see, "Paper does not feed through printer". Click this link & follow the instructions.

Jan 26, 2008 | Barebone Systems

Not finding what you are looking for?
Barebone Systems Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Barebone Systems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

john smith

Level 2 Expert

366 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Barebone System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...