Question about Routers

2 Answers

Wireless connections dsl for office, 4 pc, 2 laptops, comes up limited or no connectivity.

Posted by on

  • skatecrusher Dec 24, 2008

    ok i used a belkin wireless thing to connect to my GT704WG router with my laptop but it says it has a limited connection how can i fix this so i can fully access my router and have internet

  • Hollyecho Montgomery
    Hollyecho Montgomery May 11, 2010

    1. What wireless router are you using?

    2. Does it have WEP enabled?

    3. Has the DSL been configured for that router?


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Having same problem got the laptop to connect but having limited connection meaning i cant use the internet my router is 3com office connect adsl wireless 11g firewall router any suggestions?

Posted on Mar 28, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Please you write more detail to problem.

Thank you.

Posted on Mar 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The connection is limited


If you get a 'Limited connectivity" on you wirelessconnection on your laptop, it means that the wireless card on your laptopprobably did not get an IP address from the wireless router.
To fix this problem, right click on the wireless icon on the Task bar and thenclick Repair.
This will force the wireless router to issue a IP address to the wireless cardon the laptop.

Jun 29, 2012 | 3Com OfficeConnect Wireless 11g Cable/DSL...

1 Answer

How do I use my laptop as an internet source for my wireless router?


You Internet access is through the cable or DSL modem.
Connect your wireless router to the cable or DSL modem and then configure the wireless router with the wireless encryption settings. Then configure the wireless cards in the laptops with the router's encryption settings etc. This will then allow the laptops to connect wirelesslt to the wireless router and the Internet.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Mar 05, 2012 | Linksys WRT Routers

1 Answer

Aztech DSL 605 EW losing internet connection when I am connecting/enable the wireless connection. Could any one suggest solution? Rgrds


1. check connection by 1st pinging the network card That is go to the dos window and type " ping 127.0.0.1 you should get 4 replies.
if not then you need to check the driver set for you network card.
2. check the ether net cord with a know good one
3. reset the router by unplugging it and reboot the pc
4.Call your ISP to check for outages

********************************************************
1.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.

Aug 03, 2010 | Routers

1 Answer

Router not working right


When there is limited connectivity check if the laptop gets an IP address from the router. ELse try configuring it manually. Restart the laptop if necessary.

Please rate if helpful.

Thanks

Apr 14, 2010 | Gateway 802.11g Wireless DSL/Cable Router...

1 Answer

Connect two computers to internet thru AT&T DSL


You can install a either a 4 jack wireless router( cost about $25). This will allow you to either cable 4 PC's or connect your PC's via the wireless feature. The instructions that come with the wireless router will give you installation instructions (it's fairlly easy). Make sure you secure your network with at least WEP security.
Let me know if you need more help.

Dec 10, 2009 | 2wire (1000-400108-001) Router

1 Answer

No internet connectivity after upgrade firmware


1,there is a reset button
2,press this using any pin with power
3,automatically restart
4,connect your router with pc
5,type 192.168.1.1 on the browser
username:admin
password:admin12 or admin
configure router
enable dhcp

Oct 29, 2009 | D-Link DSL-G604T Wireless Router

1 Answer

Trying to connect a wired network wirelessly to a router


No. You'll need to run a "cross-over" Ethernet cable from one of the "LAN" ports on the "downstairs" router, connecting to the "WAN" port on another router that you will need to buy, and place "upstairs", and connect the 4 devices to the 4 "LAN" ports.

Or, run a long "straight-through" Ethernet cable from your DSL-modem (or cable-modem) that is "downstairs", and move your wireless router "upstairs", and connect the 4 devices to the router's "LAN" ports.
Your laptop "downstairs" should still be able to connect (wirelessly) to the wireless-router that is "upstairs".

Sep 16, 2009 | Gateway Belkin 54g Wireless DSL/Cable...

1 Answer

Hp Pavilion dv6929nr not connected with D-link DI-624


There are a number of factors that can cause the signal of your access point to deteriorate and the performance of your network to fall under par. Practically any appliance that operates on the same frequency level (2.4 GHz) as 802.11b or 802.11g can cause interference with your wireless network. Be sure to keep cordless phones, microwaves and other electrical equipment at least 1m away from the access point. Try changing channels on the access point and test it out on one of the clients. To change the radio channel on the access point login to the configuration (usually a web based interface) and go to the Wireless Settings (will vary depending on vendor) section, select a different channel and save settings. On the client, go to Device Manager, right click your wireless network adapter and go to Properties. In the advanced tab select the Channel Property and change the Value to the same number as the one you chose on the Access Point. Disable and then re-enable the wireless connection. Also you can try by select the speed manually 802.11b or 11Mbps on your laptop wireless properties.


PLZ GIVE RATING BY CLICK ON YES or NO.

Mar 21, 2009 | HP Routers

1 Answer

Belkin wireless router not assigning IPs for wireless clients


Some routers start handing out DHCP wireless IP's at 192.168.2.100. Try setting the upper limit at .110. If the router is found in a site survey (view wireless networks) but cannot connect, the limitation would be why.

Jan 10, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

DSL 2640 T - Wireless connection problem


go to your mom and ask if they know how to fixed that problem that you have ,, tc hahaha

Oct 19, 2008 | D-Link ADSL2/2+ Modem/Wireless Router...

Not finding what you are looking for?
Routers Logo

Related Topics:

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...