I tried to upgrade bios on my HP IPAQ 6945 form HP site. But during the upgrade system got stuck on HP screen and I am getting the message can not read from device now. Can you give me any idea how to resolve this.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi. While holding power button, and pressing reset will do a hard reset to your PDA (reset the device to its factory default settings). So if your PDA is working well, don't do it. As for the syncronization with your Vista PC; Winodws XP uses the ActiveSync software for syncronization, and for Windows Vista, Microsoft developed a brand new syncronization software called "Windows Mobile Device Center". It can be downloaded here: (http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-download.mspx). When you download/install this software to your PC, you should be able to connect your PDA to your PC without any problem, and definitely without changing any OS in your PDA or PC. Hope this helps.
Not sure about the memory card way, active sync didn't work on mine either and from what I read it won't but my machine automatically sync'd on starting the sp29841 application file I downloaded from the HP site (the sync can take a while). Active sync didn't start to work again until it was restored through that (up to that the PC didn't recognise the ipaq as connected either). Hope you get it sorted.
Hi, I have same problem. After upgrade bios to version 1.10 my ipaq h1940 don`t start windows. When switch ON appears HP logo, time line go to end, and ipaq stay block. No possible switch OFF and no starting windows.
I would check your iPAQ to see what operating system is showing. Start -> Settings -> System (Tab on bottom) -> About (icon) this will tell you if its 2000 or 2002. You may have to acquire an older ROM and reflash.