Question about Kenmore 18 in. 14432 / 14439 Built-in Dishwasher

2 Answers

Water isn't coming in

My model number is 587.143200 - it was purchased in 2003

Posted by on

  • sdharan May 08, 2010

    I am reading the trouble shooting pages and have printed out the manual. Can I email you if I need assistance?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 949 Answers

Hi,

The first think to check it if the over fill protector is stuck. If you take the lower rack out in the front corner will be a small device that looks like a hat. Make sure nothing is caught under it like a spoon. This hat should move up and down about 1/2" freely.

If this is okay and no one has done anything to your water shut off valve under the sink then the problem is almost always the water inlet valve inside the dishwasher, If you are going to try this repair yourself let me know and I can give you some tips.

Posted on May 08, 2010

  • Philip May 08, 2010

    Yes, you can contact me here anytime

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 12,061 Answers

Http://www.managemylife.com/mmh/Troubleshooting_Guides/Dishwasher.pdf
Top one is a troubleshooting guide, below are service manuals. http://appliancejunk.com/ge/dishwasher/31-9137.pdf
http://136.166.4.200/contents/Dishwasher/LDS5811/LDS5811_Service_Manual.pdf
http://appliancejunk.com/ge/dishwasher/31-3280.pdf
If the water isn't coming in, it could be a number of things, i have given you links to service manuals these will show you how to troubleshoot and repair your unit. They are quite easy to repair once you have identified the problem. It is all explained in easy terms and you should have no troubles at all. All dishwashers are somewhat "Generic" so it doesn't really matter about the exact manual.

Posted on May 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Only the Cold water washing works. How come when I turn the Hot the water stops


bad water valve on the washer.shut the hot water off at the shutoff.disconnect the hot water hose going to the washer and stick it into the washer or a sink and turn it on,if water is coming out then it's the washer water valve that's bad,the hot water side isn't working correctlypart number .285805 and it's around 30 dollars
http://www.youtube.com/watch?v=Fk4puRv3Vk8

May 05, 2012 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Hi, I have a Kenmore Elite Refrigerator model #596.76253702 that leaks water from the bottom every time the ice maker refills. The problem keeps getting worse since I purchased this product 2 years ago.


If it overfills and drips, look for an adjustment behind the plastic endcover with a +/- on it. - is less water.
If it continuously drips, replace the water inlet valve on the back where the house water supply comes in.


Ice maker water not stopping
The water inlet valve may be staying open. You can swap the wires on the dual water inlet valve and disconnect the water line at the valve which goes to the ice maker. When you try the water dispenser the water will come out there. When you stop the water dispenser, if the water at the valve doesn't stop, the valve isn't closing so you'll need to replace it. If it does stop after trying it several times then the problem is with the ice maker.

Aug 24, 2011 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

1 Answer

2003 alero. Low beam headlight out. I purchased a new bulb 9006 it does not work. There is power at the socket. Could I have purchased the wrong bulb? Should it have been a 9005? all fuses good highbeam...


The wrong one or the one you bought is bad. With so many different bulbs now, it isn't hard to get the wrong one, especially if the parts guy got it for you. The only way to make sure it is right is to pull the other bulb and check the number.

Jun 22, 2011 | 2003 Oldsmobile Alero

1 Answer

My kenmore elite top load washer model #16972500 is`t doing anything,just "hums". Don`t start,nor getting water,nor wash or spin, just nothing. As you change the timer just hear a "hum"...


Are you sure about the model number? When I plug it into my system it comes back as an invalid model number - comes back as a parts breakdown.

For you to troubleshoot this, you are going to need to be able to open up the machine and have a multimeter and ampmeter to track back the problem. Is that something you are willing to do? Or is it time to consider calling a professional? This type of problem can be quite hard to diagnose, but normally the repair isn't.

Jun 09, 2011 | Kenmore Washing Machines

1 Answer

How do I go about purchasing new speaker cords for a v 5.1 home theater system?


Is THAT the model number? It surely ISN'T the audio power output.

Anyway, figure out what the model number really is and Google it with "cable" or search eBay plus check the 'include description' box.

This might be one...

http://cgi.ebay.com/6-Toshiba-Yamaha-Panasonic-HT-Speaker-connectors-4-2mm-/220758345589?pt=LH_DefaultDomain_0&hash=item3366390775

May 30, 2011 | Samsung 1000W 5.1-Ch. Home Theater System...

1 Answer

Coolant fan isn't coming on on my 2003 pontiac


most of the time its in the radiator (side tanks)

May 27, 2011 | 2003 Pontiac Grand Prix

1 Answer

I have an old Maytag dishwasher, which came with the home we purchased 20 years ago. i am wondering how water efficient it is; it still works, but I also frequently find it with dirty water which has...


It is as efficient as any dishwasher made today. It is also mechanically better than most made today. Keep it running as long as you can.
Under the sink find the dishwasher drain line,using a piece of wire or string tie the DW hose up under the sink so that there is a rise in the hose from the disposal drain outlet.This way drain water will not go back down the hose.

Aug 24, 2009 | Dishwashers

1 Answer

GE Profile top load washer purchased 2003 water comes out from under washer when spin and drain cycle on. this not mentioned in trouble shooting area. think it is water pump or whatelse can it be?


It has to be in the water exit path somewhere - is there a pump sump inspection? Is there a hose split? Likely the drain hose, or where it connects to the machine. Has the pump split open? Can you remove the machine cover and inspect it while it is doing a cycle so you can see where the water is coming from?

Apr 26, 2009 | Washing Machines

1 Answer

When machine is turned on water coming out the


YOU'LL HAVE TO TAKE THE BACK OFF AND SEE IF YOUR FRESH WATER NOZZLE ASSEMBLY IS SOMEHOW DISCONNECTED. GO TO www.repairclinic.com ENTER MODEL NUMBER AND SCROLL DOWN ALL THE WAY AND CLICK THE RED 100 WHEN PAGE CHANGES LOOK FOR PART NUMBER 1202951. THIS MAY BE THE PROBLEM.

Apr 07, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

Not finding what you are looking for?
Kenmore 18 in. 14432 / 14439 Built-in Dishwasher Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

Fred Sops

Level 2 Expert

272 Answers

D. E. Hev

Level 3 Expert

1179 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...