Only The Right Side Works and i can't take it apart to see what is wrong.

the contacts in switch are bilt up with carbon!if you're handy try taking it apart And cleaning the contacts.or buy a new one

When you pull the wire up does it increase the right ear bud volume/ sound? If it does, then it means the right side ear bud has a short within the head phones circuit which is aka the wire that leads to the musical device in which the ear buds branch off from.

If the right side ear bud does not produce an increased volume for sound by picking the wire up or pulling it in towards you or to the left side of your body or musical device then it means that the right speaker is blown.

I know that all head phones come spiced together aka they are stuck together and have to be pulled apart in order to get both head phones seperated from each other so that they can be worn in the ears. If you pulled the wire apart to much or too quickly then that is what ruined the right head phone.


I suggest that regardless if the ear phones begin to work by pulling the wire up,side ways, or into towards your body that you return them back to the store since after awhile the problem will eventually continue to happen causing the right ear bud to completely blow. Once you return the ear phones be cautious with the new set when you seperate the ear buds from each other since they are very touchy and have to be handled with delicateness when seperation is taking place.

Please let me know how it works out for you. I have had many ear buds and I tell ya something; they are very easy to blow one side when seperating. I had to learn after a few pairs that I was ruining the speakers by the way I was seperating my wires. I kept thinking for the first 3 pairs that the store was selling blown ear buds until I began having same problems with another few stores so I said to myself "well the solution is to figure out what I am doing wrong in order to blow one side of my ear buds every time". After few seconds it was not that obvious that all I had to do for assembly was to pull the wires apart in order to get both ear buds to go into my ears.

you can't cause once you take it apart it don't work right again.

Dropping the stuck poles definitely WORKS! We had stuck basketball poles from a Spaulding 54 inch together wrongly. Dropped them on grass from shoulder height 4 times and they loosened enough to pull apart.

If you have only 1 motor controlling your wipers, then something is broken somewhere inside your motor. Since when the motor turns it uses the same gear to move both wipers. Maybe the rod came apart in the motor or broke. Can't say for sure because I don't know your exact set up but 1 motor means you narrowed it down to 1 place. Good luck.

The keyboard and touchpad have two separate ribbon cables. Did you check both?

It sure sounds like there is a break in the circuit to the right hand bulb. See if you can follow the actual wire back to where it goes into the loom. Possibly a push fit plug loose or out.

check your freon. I just had the same problem and when the dealership told me that, I thought it didn't make sense. Well after having my dash apart and nothing wrong was found... charged the freon and guess what.... it works great now!

I'm not sure if this will help, but we pulled my Panasonic KX-B520 printing whiteboard apart to find out why it didn't print. After a couple of hours and much head-scratching we figured out the paper was in the wrong way around. The printer was working fine, it just couldn't print on the wrong side of the paper. Even though the diagram on the inside of the paper bin showed the the print side of the paper on the outside of the roll, this particular paper roll had the print side on the inside. Answer? Put the paper in the other way around. It works a treat.

To see which side your paper prints on, hold a match or lighter to one side of the paper and see if it goes black from the heat. One side will, and the other won't (well, it will burn, but not like the other side. Use your common sense here.) The print side of the paper should contact the horizontal metal strip at the top of the paper holder bay.

Good luck. I hope my answer works for your problem, because it's so easy to resolve.

James from Canberra.

you have an open thermal fuse la1053 located on the right lower side of the heating element housing, it opens when the temp reaches 300 degrees f . this is telling us that the air flow is not good, lint buildup inside the filter housing in the door is a good place to start and or kinked vent hose or venting problem