Question about Hitachi 42EDT41 42 in. HD-Ready Plasma Television

1 Answer

Have a Hitachi 42HDT20-A plasma TV - cannot get the TV to come after the box light is green - the TV light blinks orange as if in the standby mode? Your thoghts - Oscar G.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 12,061 Answers

Http://www.fixdevice.com/smanuals/file/36673.html
http://www.scribd.com/doc/3401783/Hitachi-Service-Manual-TV-Plasma-42HDT5055-Chasis-PT3G


Above is a Service and repair manual, this will show you how to troubleshoot and repair this unit. it is what the engineers use to do that. Below, is a User manual, in there is important information, as well. So please, download ALL manuals and have a read.
http://www.retrevo.com/support/Hitachi-42HDT20-TVs-manual/id/372ci952/t/2/

This is a classic switchmode power supply, shutting down to avoid a fire, explosion, or both. This set had developed a problem, that is so severe that the set must be shut down, This set should be removed from the Power, and in my professional recommendation, you should get a "Quote" for repair, from, an Hitachi, Approved Service Center, you need to contact a local or head office, and ask them for a referral to an authorised service center.this point is very important for a good result, Always contact, their local, "Head Office" Now, when you get the information you want, then you can decide as to repair of replacement. The reason we want an approved agent, is that way, all the engineers are trained on their own brand sets, they have seen almost all faults, and will get the job done quicker, and for less cost, and usually have parts on hand, also sometimes, there has been a service bulletin in issued and the repair may be subsided or even free. In any event they are the best people to let you know whats going on, and you can make an informed decision as to what to do, repair or replace?

Posted on May 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hitaci plasma 42hdt20 remote will turn monater when red standby light on


Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.
http://electro-medical.blogspot.com/

Dec 25, 2016 | Hitachi 42HDT20 42 in. Plasma Television

2 Answers

Flashing orange light what happened?


Unplug it for a while, pray a bit and then plug it in again while keeping your fingers crossed.

Jun 02, 2014 | Hitachi 55HDT51 55 in. HD-Ready Plasma...

1 Answer

The TV picture breaks up and pixalates.


Digital video processing section circuit should be checked. it is a very very skilled work. Contact the nearest authorised service center for Hitachi.

May 12, 2012 | Hitachi 42HDT20 42 in. Plasma Television

1 Answer

50px1d-uc When I try to turn it on, the red power light blinks, I hear a click, then the light turns amber then back to red. Usually I'd hear the click then it would turn green and the tv would work...


I came across this in a manual
-Without CableCARDTM : Illuminates red in
standby mode, Illuminates green when the
TV is turned on.
-Inserting the CableCARDTM : Illuminates
orange in standby mode, Illuminates green
when the TV is turned on....
You might want to check your cable card. It seems to mimic your problem. Try taking the card out and gently clean, with a dry cloth, the contacts/strip. Then take some "canned air" and blow out the card socket from the side to dislodge any accumulated debris.

Oct 13, 2011 | LG 50PX1D 50 in. Plasma Television

1 Answer

I have a hitachi 50 "plasma that was given to me


First do you see a light indicating that the TV has power? There are two power buttons on the TV (the main power and the regular power button). The red standby light will light up when the main power switch is on. This indicator is just to the left of the remote I/R sensor. You can find the main switch on the bottom front of the tv (it is under the tv forward of the stand). Turn on the Main power if it is not on. Then try the power button on the control panel of the TV again.

Does the standby light change color or blink? (Red is standby, orange is power savings (no signal), blue is on.) If the main switch is on and the standby light doesn't come on, the TV has a problem at the power supply. Try unplugging the unit for a bit (at least 30 seconds) and then plugging it back in. This will reset the internal circuitry. If you see a blinking light, then the TV is reporting a self-test failure. I do not know the codes for this model Hitachi Plasma TV.

The manual for the Hitachi P50H401 TV is available from Retrevo: http://www.retrevo.com/support/Hitachi-P50H401-TVs-manual/id/1233ci869/t/2/ . You will need to enter a code to access the pdf.

I'm assuming you don't have one of the special versions that were intended for large audiences that were only controlled by remote (no control keys on the front of the TV). Remotes.com has the original remote or a substitute remote if you need it. See http://www.remotes.com/remotes/servlet/rs?a=gmi&uuid=13104063628240&smodel=P50H401&brand_pn=HITACHI_P50H401 .

I hope this helps.

Cindy Wells

Jul 11, 2011 | Hitachi P50H401 50 in. Plasma HDTV

1 Answer

Red LED lights


power supply shot ... sometimes x board or y board

Oct 02, 2009 | Pioneer PureVision PDP-5030HD 50 in....

1 Answer

Hdmi


You can get HD using "Component" video connections.

Geno

Mar 17, 2008 | Hitachi 42HDT20 42 in. Plasma Television

5 Answers

Phillips FTR 9964 Blinking Green/Orange Indicator Light


PHILIPS 42 WILL NOT TURN ON,WITHE FTR9964 RECEIVER
TO BLINK ORANG /GREEN AFTER 40 SEC ORANAGE

May 23, 2007 | Philips E-Box FTR9965 DTV Receiver

Not finding what you are looking for?
Hitachi 42EDT41 42 in. HD-Ready Plasma Television Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74496 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...